2 layers35 × 31.3 mm
2 layers35 × 31.3 mm
Production v1.2
zibredlektab/MFSerialMicroforce Analog to Preston Serial converter
- Size
- 35 × 31.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 74
- Pads
- 236
- Tracks, vias
- 447, 47
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2024
- Updated
- 14 Oct 2025
Overview
Production v1.2 is an open-source printed circuit board by zibredlektab, from the zibredlektab/MFSerial repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 35 × 31.3 mm with 55 parts on 74 nets, routed with 447 tracks and 47 vias.
It is built around the MAX3323EEUE+T, ADR02AUJZ-REEL7 and ADR06BUJZ-REEL7, with the TL6100DF300QP, B3U-3000P and ECS-.327-12.5-1210-TR among its other parts. Its parts include 25 capacitors, 8 resistors, 5 ICs, 4 connectors and 3 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
6
MAX3323EEUE+T
TSSOP-16-40℃~+85℃ 1 1 250Kbps 3V~5.5V Transceiver TSSOP-16 RS232 ICs ROHSMaxim Integrated (Analog Devices)RS232 ICs
ADR02AUJZ-REEL7
TSOT-23-5-40℃~+125℃@(Ta) 10mA 10uVp-p 1mA 25ppm/℃ 5V 7V~36V Fixed Series ±0.1% TSOT-23-5 Voltage Reference ROHSAnalog DevicesVoltage ReferenceADR06BUJZ-REEL7
TSOT-23-5-40℃~+125℃@(Ta) 10mA 1mA 3V 5V~36V 6uVp-p 9ppm/℃ Fixed Series ±0.1% TSOT-23-5 Voltage Reference ROHSAnalog DevicesVoltage ReferenceTL6100DF300QP
插件-40℃~+85℃ 12V 3N 50mA PC Pin Round Button SPST-NO Through Hole 插件 Tactile Switches ROHSE-SwitchTactile Switches
B3U-3000P
SMD,3x2.5mm-25℃~+70℃ 1.2mm 1.59N 12V 2.5mm 3mm 50mA Black IP40 Rectangular Button SMD(SMT) Tab SPST Surface Mount, Right Angle Without Bracket SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches
ECS-.327-12.5-1210-TR
UncategorisedECS Inc. International
README
README.mdMFSerial
Microforce Analog to Preston Serial converter
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C7, C15, C17, C20, C21 |
| 4 | 100nF,25V | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4 |
| 3 | 5K1 | Resistor_SMD:R_0201_0603Metric | R1, R2, R7 |
| 2 | .1uF, 100V | Capacitor_SMD:C_0805_2012Metric | C23, C25 |
| 2 | .1uF, 10v+ | Capacitor_SMD:C_0402_1005Metric | C22, C24 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C9, C11 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C14, C16 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C10, C12 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | D_Schottky | Diode_SMD:D_1206_3216Metric | D2, D3 |
| 2 | TL6100DF300QP | TL6100DF300QP:TL6100DF160QP | S1, S2 |
| 1 | 1K | Resistor_SMD:R_0201_0603Metric | R6 |
| 1 | 1pF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 2.2uF,100V | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 22uF,10V+ | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 3K3 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 530480410 | Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J2 |
| 1 | 530480510 | Connector_Molex:Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal | J1 |
| 1 | 5K6 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 600 MHz @ 100 MHz | digikey-footprints:0603 | L1 |
| 1 | 600 Ohm @ 100 MHz | digikey-footprints:0603 | L2 |
| 1 | 65 | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 680K | Resistor_SMD:R_0201_0603Metric | R8 |
| 1 | ADR02AUJZ-REEL7 | Package_TO_SOT_SMD:TSOT-23-5 | U2 |
| 1 | ADR06BUJZ-REEL7 | Package_TO_SOT_SMD:TSOT-23-5 | U3 |
| 1 | AP7375-33SA-7 | AP7375-33SA-7:SOT96P240X110-3N | U5 |
| 1 | ATSAMD21G18A-AUT | Package_QFP:TQFP-48_7x7mm_P0.5mm | U1 |
| 1 | B3U-3000P | Button_Switch_SMD:SW_SPST_B3U-3000P | S3 |
| 1 | ECS-.327-12.5-1210-TR | ECS__327_12_5_1210_TR:XTAL_ECS-.327-12.5-1210-TR | Y1 |
| 1 | FH34SRJ-16S-0.5SH_50_ | FH34SRJ_16S_0_5SH_50:HRS_FH34SRJ-16S-0.5SH_50_ | J4 |
| 1 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MAX3323EEUE+T | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | SCK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | USB4085-GF-A_REVB | USB4085_GF_A:CONN16_USB4085-GF-A_GCT | J3 |
More from zibredlektab/MFSerial
6- 2 layers78 × 60 mm
- 2 layers35 × 31.3 mm
- 2 layers38.5 × 37 mm
- 2 layers69.9 × 47.8 mm
- 2 layers24.6 × 10.8 mm
Similar boards
- 10 layers45 × 45 mm
- 2 layers150 × 100 mm
Rps01
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
182 parts - 2 layers36.5 × 18 mm
PS2 Serial adapter
zachary-cauchi/ps2-uart-interface
Schematics for accessing the PS2 serial interface.
11 partsMIT - 4 layers38.4 × 128.5 mm
- 4 layers54.6 × 57.1 mm
CM5 MINIMA
piecol/CM5_MINIMA_REV1
CM5 LoRaWAN carrier board in a compact, feature-filled footprint
98 parts63CERN-OHL-S-2.0 - 4 layers48 × 35.1 mm
Micro esp32-s3
atomic14/esp32-tv-hardware
This is Work In Progress - I'm still working on this.
81 parts29 - 2 layers48.7 × 44.9 mm
Esp32-crystal ball
atomic14/esp32-crystal-balls
This PCB is now supporting two of my projects: Crystal Balls and my Flame Lamp.
54 parts10 - 4 layers59.7 × 22.4 mm
Buzzrito
plinkysynth/buddies_public
open source release for bib, blueberry and buzzrito 1U eurorack modules by plinky synth and crey emporium
141 parts9
Questions
How big is the Production v1.2 PCB?
It measures 35 × 31.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Production v1.2 use?
55 parts, built around the MAX3323EEUE+T, ADR02AUJZ-REEL7, ADR06BUJZ-REEL7 and TL6100DF300QP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Production v1.2 KiCad files?
From the zibredlektab/MFSerial repository on GitHub, at the commit this page was made from: the board is Production v1.2/Production v1.2.kicad_pcb and its schematic MFSerial Proto/MFSerial Proto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Production v1.2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).