Skip to the content
4 layers59.7 × 22.4 mmBuzzrito, the printed circuit board in 3D

open source release for bib, blueberry and buzzrito 1U eurorack modules by plinky synth and crey emporium

Size
59.7 × 22.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
141
Nets
106
Pads
457
Tracks, vias
1,271, 125
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Aug 2026
Updated
1 Aug 2026

Overview

Buzzrito is an open-source printed circuit board by plinkysynth, from the plinkysynth/buddies_public repository on GitHub. It is a 4-layer board of 59.7 × 22.4 mm with 141 parts on 106 nets, routed with 1,271 tracks and 125 vias.

It is built around the RP2040, TL072 and TLV320AIC3204IRHBR, with the W25Q128JVSIQ, LM4040B25FTA and USBLC6-4SC6 among its other parts. Its parts include 51 capacitors, 49 resistors, 13 ICs, 10 diodes and 10 connectors. It belongs with the audio and music boards and the RP2040 boards of this library.

Main components

10

README

README.md

the buddies

hardware and software for bib, buzzy and blueberry - little plinky-adjacent projects from a few years ago. buzzy is still called buzzrito in a few filenames.

These were available for a while through Thonk and Crey Emporium, and may be again in the future. They are no longer being actively developed, so we are releasing this snapshot of the hardware and software into the public. You are in the right place for that!

original release note

We apologise, its been so long since we looked at this. We are releasing a snapshot of what we have here after a couple of years of barely being touched. We hope that by open sourcing the buddies, people can inspect them, repair them, learn from them, or make their own variants.

Please treat this as a public snapshot rather than an actively maintained product. The hardware is mostly in hw/, the software is in sw/, and the docs/manual sources are in docs/.

We were a bit chaotic at the time of making these design files, and you should know we haven't manufactured anything from this exact version of the files - so please check carefully before ordering anything.

These files are provided as-is, with no warranty or guarantee of correctness, safety, manufacturability, fitness for purpose, or support. On the other hand, we have not intentionally omitted or broken anything! Good luck. If nothing else, we hope these files will serve as a useful reference for somebody to learn from.

If you have any questions, the Plinky Discord is probably the place.

License stuff

Please refer to the license for information including stuff about derived works.

Thanks again!

Thanks to everyone who bought, built, stocked, tested, encouraged, or otherwise helped these odd little buddies exist.

-- mmalex & ray

Parts

141
QtyValueFootprintReferences
25100nCapacitor_SMD:C_0402_1005MetricC201, C204, C208, C209, C210, C223, C224, C225, C226, C227, C228, C229, C232, C233, C236, C237 +9
115k1Resistor_SMD:R_0402_1005MetricR201, R202, R203, R214, R215, R217, R218, R221, R222, R239, R242
10100kResistor_SMD:R_0402_1005MetricR206, R209, R225, R228, R243, R244, R245, R246, R247, R248
1010uCapacitor_SMD:C_0805_2012MetricC203, C205, C211, C214, C215, C216, C217, C218, C247, C249
51N5819WSDiode_SMD:D_SOD-323D201, D202, D203, D204, D208
539kResistor_SMD:R_0402_1005MetricR205, R208, R211, R224, R227
5TestPointTestPoint:TestPoint_Pad_D2.0mmTP201, TP202, TP203, TP204, TP205
5xl1010picoplinky_global:XL1010D205, D206, D207, D209, D210
418pfCapacitor_SMD:C_0402_1005MetricC219, C220, C230, C231
41MResistor_SMD:R_0402_1005MetricR204, R207, R223, R226
41kResistor_SMD:R_0402_1005MetricR212, R213, R235, R240
41ufCapacitor_SMD:C_0402_1005MetricC202, C238, C241, C246
433kResistor_SMD:R_0402_1005MetricR219, R220, R229, R230
44.7nFCapacitor_SMD:C_0402_1005MetricC206, C207, C221, C222
4MCP6001-OTPackage_TO_SOT_SMD:SOT-23-5U202, U203, U207, U208
327kResistor_SMD:R_0402_1005MetricR210, R231, R232
333Resistor_SMD:R_0402_1005MetricR237, R238, R249
3AudioJack2_SwitchTpicoplinky_global:Jack_3.5mm_QingPu_WQP-PJ301M-12_VerticalJ202, J204, J205
2100Resistor_SMD:R_0603_1608MetricR233, R234
210kResistor_SMD:R_0402_1005MetricR236, R241
210uFCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC234, C235
2220pfCapacitor_SMD:C_0402_1005MetricC212, C213
2AudioJack2_SwitchTpicoplinky_global:Jack_3.5mm_QingPu_WQP-PJ301M-12_Vertical_GroundJ201, J203
2LM4040B25FTAPackage_TO_SOT_SMD:SOT-23U201, U204
2USBLC6-4SC6Package_TO_SOT_SMD:SOT-23-6U212, U213
124AA02-OTPackage_TO_SOT_SMD:SOT-23-5U211
14.7Resistor_SMD:R_0603_1608MetricR216
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U210
1AudioJack2_SwitchTLibrary:Jack_3.5mm_QingPu_WQP-PJ301M-12_Vertical_GroundJ206
1B3U-3000Peasyeda2kicad:KEY-SMD_B3U-3000PSW201
1CSP-USC16-TRpicoplinky_global:VALCON_CSP-USC16-TRJ208
1Conn_01x03_PinConnector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_HorizontalJ209
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ210
1Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ207
1Crystal_GND24Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY201
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU209
1TL072Package_TO_SOT_SMD:TSOT-23-8U206
1TLV320AIC3204IRHBRpicoplinky_global:QFN50P500X500X100-33NU205
1W25Q128JVSIQCustom Libraries:USON-8_L3.0-W2.0-P0.50-BL-EPU$201

More from plinkysynth/buddies_public

4
  • 4 layers59.6 × 45 mmBib, the printed circuit board in 3D

    Bib

    plinkysynth/buddies_public

    open source release for bib, blueberry and buzzrito 1U eurorack modules by plinky synth and crey emporium

    134 parts9
  • 4 layers59.7 × 22.4 mmBlueberry, the printed circuit board in 3D

    Blueberry

    plinkysynth/buddies_public

    open source release for bib, blueberry and buzzrito 1U eurorack modules by plinky synth and crey emporium

    132 parts9
  • 2 layers60.6 × 128.5 mmThreeu panel, the printed circuit board in 3D

    Threeu panel

    plinkysynth/buddies_public

    open source release for bib, blueberry and buzzrito 1U eurorack modules by plinky synth and crey emporium

    37 parts9
  • 2 layers60.7 × 39.7 mmBib panel, the printed circuit board in 3D

    Bib panel

    plinkysynth/buddies_public

    open source release for bib, blueberry and buzzrito 1U eurorack modules by plinky synth and crey emporium

    13 parts9

Similar boards

  • 4 layers80 × 80 mmZ5524, the printed circuit board in 3D

    Z5524

    brer-rabbit/zoxnoxious

    Analog synth / software interface

    234 parts68GPL-3.0
  • 4 layers59.2 × 106.4 mmAlphaosc, the printed circuit board in 3D

    Alphaosc

    russellmcc/alphaosc

    eurorack digital audio oscillator for synthesizers

    108 parts8GPL-3.0
  • 2 layers78.7 × 106.7 mmBraids v50, the printed circuit board in 3D

    Braids v50

    jonstapleton/mutable_eurorack

    Eurorack modules

    120 parts
  • 4 layers99.5 × 65 mmEcho, the printed circuit board in 3D

    Echo

    rh1tech/echo

    Echo: ESP32-Based VGA Board

    181 parts4
  • 2 layers100 × 100 mmCombo laser driver, the printed circuit board in 3D

    Combo laser driver

    adeboni/laser-projector

    This project is for a quadruple laser projection controller, aimed at supporting room-scale projections

    169 partsGPL-3.0
  • 2 layers99.1 × 99 mmXDuinoRail Debug, the printed circuit board in 3D

    XDuinoRail Debug

    chatelao/xDuinoRail-Decoder

    The friendly decoder development plattform for model railroad tinkers.

    170 partsAGPL-3.0
  • 2 layers80 × 50 mmWideband v3, the printed circuit board in 3D

    Wideband v3

    Churrosoft/OpenEFI-Wideband

    O2 Sensor visualizer

    79 parts1MIT
  • 2 layers48 × 48 mmBrain, the printed circuit board in 3D

    Brain

    scottcjx/brain

    38 partsGPL-3.0

Questions

How big is the Buzzrito PCB?

It measures 59.7 × 22.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Buzzrito use?

141 parts, built around the RP2040, TL072, TLV320AIC3204IRHBR and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Buzzrito KiCad files?

From the plinkysynth/buddies_public repository on GitHub, at the commit this page was made from: the board is hw/buzzrito/buzzrito.kicad_pcb and its schematic hw/bib/bib panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Buzzrito design in my own project?

Its repository states no licence, so its author keeps all rights: ask plinkysynth before reusing the design.