Skip to the content
4 layers100 × 100 mmTankervision pdb, the printed circuit board in 3D

Four-layer KiCad power distribution board for the TankerVision robot: USB-C PD / barrel-jack input, supercapacitor-backed rail for clean Jetson shutdown, and four firmware-controlled protected output ports.

Size
100 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
452
Nets
285
Pads
1,414
Tracks, vias
2,959, 1,859
Pours
34
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
2 Sep 2026
Updated
16 Sep 2026

Overview

Tankervision pdb is an open-source printed circuit board by ikeefe12, from the ikeefe12/tankervision-pdb repository on GitHub. It is a 4-layer board of 100 × 100 mm with 452 parts on 285 nets, routed with 2,959 tracks and 1,859 vias.

It is built around the ESP32-S3-WROOM-1-N8R8, TPS51385RJNR and TVS2200DRVR, with the TS5A3159ADBVRE4, TVS0500DRVR and TLV70933PKR among its other parts. Its parts include 197 resistors, 119 capacitors, 48 ICs, 41 diodes and 18 transistors. It belongs with the robots and motor control and computers and single-board computers boards and the ESP32 boards of this library.

Main components

12

README

README.md

TankerVision Power Distribution Board

A four-layer KiCad power distribution board (PDB) for the TankerVision robot. It accepts USB-C PD or an 18.5–20 V DC barrel-jack input, maintains a supercapacitor-backed rail so an onboard NVIDIA Jetson can shut down cleanly after input loss, and exposes four independently protected, firmware-controlled output ports.

Designed in KiCad 9.0.7. Revision 1.0 was fabricated and assembled by JLCPCB in August 2026.

PCB topPCB bottom

Highlights

  • Dual redundant input — USB-C PD (CYPD3177 requesting 20 V) and a DC barrel jack are ORed through two reverse-blocking LM73100 ideal-diode switches.
  • Supercapacitor backup — a BQ24640 charges an external bank through a 24.5 V LM5155 boost; a TPS2121 priority mux transfers the backed +VBUS_SS domain to the bank in roughly 5 µs when the input rail collapses.
  • Orderly shutdown — the backed rails feed the ESP32-S3, which sheds loads, pulses the Jetson power button, and watches stored energy on the supercap ADC divider to decide when to commit to shutdown.
  • Firmware-independent boot — input switch → mux IN1 → +VBUS_SS → 5 V buck → 3.3 V LDO brings up the ESP32-S3 with no firmware involvement; every other load rail is deliberately under software control.
  • Protected outputs — four LM73100 output switches provide inrush control, reverse blocking, power-good, and current monitoring per port.
  • Full supervision — fourteen TLV7031 comparators condition status signals and two TCA9535 I²C expanders carry enables and status back to the ESP32-S3.

Board summary

ItemValue
Outline100 mm × 100 mm
Stackup4-layer, 1.6 mm FR-4, 35 µm (1 oz) copper on all layers
PlanesIn1.Cu solid GND; In2.Cu predominantly GND with selected routing
References452 in schematic and PCB, matched one-to-one
Production BOM444 fitted references in 84 orderable groups
InputUSB-C PD, or 18.5–20 V DC barrel jack
Outputs4 protected ports (+VBUS, +5V_VBUS, +VBUS_SS, +5V_SS)
ControllerESP32-S3-WROOM-1-N8R8

Documentation

The design is documented per functional block, with schematic labels rather than drawing coordinates used as the stable way to locate each circuit.

  • docs/README.md — start here: block index and power-rail table
  • docs/system-architecture.md — power flow, control and status map, ESP32 pin map, sequencing
  • docs/pcb-layout.md — layout review, stackup, routing, fabrication decisions, revision-1.0 order record
  • docs/issues.md — open design concerns and pre-deployment bench checks
  • docs/blocks/ — sixteen per-block documents covering USB-PD, inrush control, the power mux, the supercap charger and switch, the boost and bucks, LDOs, output switches, the ESP32, I/O expanders, comparators, analog switches, the Jetson power button, and ADC monitoring

Firmware and board verification:

Generated exports for quick reading without KiCad:

Repository layout

text
hardware/tankervision-pdb/   KiCad project (schematic, PCB, project library tables)
libraries/symbols/           custom symbol libraries (.kicad_sym)
libraries/footprints/        custom footprint libraries (.pretty)
libraries/3dmodels/          custom 3D models referenced by those footprints
docs/                        design documentation, generated exports and renders
firmware/deployment/         ESP32 deployment firmware, Jetson API/client and tests
firmware/board_control_test/  hardware bench firmware, procedures and captured results
manufacturing/rev-1_0/       as-ordered JLCPCB fabrication and assembly package

Opening the project

Requires KiCad 9.0 or newer.

sh
git clone https://github.com/ikeefe12/tankervision-pdb.git
cd tankervision-pdb
kicad hardware/tankervision-pdb/tankervision-pdb.kicad_pro

The project's sym-lib-table and fp-lib-table resolve every custom library through ${KIPRJMOD}/../../libraries/..., so the libraries load from this repository with no global KiCad configuration. Standard symbols, footprints, and 3D models come from the stock KiCad libraries installed with KiCad.

Design state

Revision 1.0 was ordered from JLCPCB on 2026-08-24. The CAD review finds no remaining electrical schematic blocker. The firmware records now include successful converter/port control checks, real-bank charging and backup intervals, and the first deployment upload with 1 Hz telemetry and same-boot serial reopen on the Mac. The remaining integration checks in docs/issues.md include loaded Jetson shutdown and backup endurance, source hot-plug, thermal validation of the 3.3 V LDO, and output-switch overload cases. The recorded unloaded and MCU-only checks do not establish those loaded behaviors.

Verification on the current sources with KiCad 9.0.7:

  • PCB DRC with schematic parity: 0 violations, 0 unconnected pads, 0 footprint errors, 0 parity issues.
  • ERC is clean in the KiCad GUI with the project's review exclusions applied. Command-line ERC does not apply those exclusions and reports six power_pin_not_driven items, all of which are the reviewed and accepted cases described in the block documentation.

Credit

Designed by Ian Keefe at TRAILab, University of Toronto Institute for Aerospace Studies.

Parts

452
QtyValueFootprintReferences
47100nCapacitor_SMD:C_0603_1608MetricC1, C3, C19, C25, C28, C29, C35, C36, C38, C39, C100, C105, C116, C117, C118, C119 +31
32100kResistor_SMD:R_0603_1608MetricR16, R18, R112, R118, R119, R120, R131, R133, R134, R135, R157, R159, R175, R176, R178, R179 +16
292k2Resistor_SMD:R_0603_1608MetricR12, R13, R106, R107, R108, R109, R110, R111, R113, R130, R160, R161, R163, R165, R166, R167 +13
2949.9kResistor_SMD:R_0603_1608MetricR17, R114, R115, R116, R117, R121, R126, R132, R136, R153, R170, R171, R172, R173, R174, R182 +13
201uCapacitor_SMD:C_0805_2012MetricC15, C26, C42, C45, C47, C75, C101, C102, C103, C104, C110, C111, C112, C113, C114, C115 +4
1710uCapacitor_SMD:C_1206_3216MetricC5, C6, C12, C13, C14, C40, C41, C51, C60, C63, C64, C80, C81, C84, C85, C90 +1
175.1kResistor_SMD:R_0603_1608MetricR44, R48, R57, R58, R88, R90, R95, R98, R101, R104, R105, R146, R151, R152, R154, R155 +1
152N7002NXAKRusbc-pd-fault-nmos:TO-236AB_SOT23_NEX-MQ2, Q3, Q5, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18
15LED RedLED_SMD:LED_0805_2012MetricD2, D3, D6, D9, D12, D13, D16, D22, D23, D24, D29, D34, D35, D36, D37
14TLV7031DBVRPackage_TO_SOT_SMD:SOT-23-5U4, U6, U7, U15, U16, U18, U27, U28, U29, U30, U44, U45, U46, U47
13120kResistor_SMD:R_0603_1608MetricR22, R23, R64, R65, R70, R123, R125, R128, R129, R186, R188, R189, R190
910kResistor_SMD:R_0603_1608MetricR6, R7, R11, R14, R26, R77, R137, R197, R198
882kΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR82, R84, R87, R138, R139, R140, R141, R195
8PMEG060V100EPDZ24V_boost_diode:SOT1289_L5.8-W4.4-LS6.5-RDD1, D8, D20, D21, D30, D31, D32, D33
722uCapacitor_SMD:C_1206_3216MetricC20, C21, C22, C37, C66, C67, C68
74u7Capacitor_SMD:C_1206_3216MetricC2, C16, C17, C18, C33, C34, C52
7820Resistor_SMD:R_0603_1608MetricR122, R124, R127, R177, R180, R181, R187
7DDZ9678-7Diode_SMD:D_SOD-123D26, D27, D28, D38, D39, D40, D41
7LM73100RPWRss_ideal_diode:IC_LM73100RPWRU22, U23, U24, U35, U36, U37, U38
7TVS2200DRVRPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU2, U20, U21, U31, U33, U39, U41
6100u100u_elec_cap:CAP_EEHZA1H101VC8, C9, C10, C11, C78, C79
6487kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR85, R86, R142, R143, R144, R145
527kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR96, R102, R103, R156, R158
54.7nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC95, C98, C99, C106, C107
5PJ-202AHbarrel-jack:CUI_PJ-202AHJ6, J7, J8, J9, J10
5TS5A3159ADBVRPackage_TO_SOT_SMD:SOT-23-6U3, U9, U12, U14, U25
4100Resistor_SMD:R_0603_1608MetricR4, R47, R162, R164
4150kResistor_SMD:R_0603_1608MetricR3, R41, R42, R51
430kResistor_SMD:R_0603_1608MetricR1, R94, R148, R150
4M3MountingHole:MountingHole_3.2mm_M3_Pad_ViaMH1, MH2, MH3, MH4
4PESD3V3S1UL,315Diode_SMD:D_SOD-882D11, D17, D18, D19
4PESD5V0L1ULDiode_SMD:D_SOD-882D4, D5, D14, D15
4TVS0500DRVRPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU32, U34, U40, U42
320kResistor_SMD:R_0603_1608MetricR5, R39, R55
36.2kResistor_SMD:R_0603_1608MetricR91, R93, R147
3FiducialFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3
3IPC50N04S5L5R5ATMA124V_boost_nfet:PG-TDSON-8-FL_L5.0-W6.0-P1.27-LS6.2-BLQ1, Q4, Q6
21.5uH20v-5v-buck:IND_MWSA0603S_SNL-ML2, L4
2102kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR74, R89
211.3kResistor_SMD:R_0603_1608MetricR15, R149
222pCapacitor_SMD:C_0603_1608MetricC24, C69
233nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC108, C109
234kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR50, R72
24.99kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR80, R100
247kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R69
2LED GreenLED_SMD:LED_0805_2012MetricD7, D25
2S3B-PH-K-S LFSNjst_3_pin:CONN_S3B-PH-K-S_JSTJ3, J5
2TCA9535DBRi2c_expander_no_pullup:SSOP-24_L8.1-W5.3-P0.65-LS7.8-BLU26, U43
2TLV70933PKR3v3-ldo:SOT-89-3_L4.3-W2.3-P1.50-LS4.3-BRU49, U50
2TPS51385RJNR20v-5v-buck:VQFN-HR12_RJN_TEXU1, U13
2TS-1088-AR02016esp32_button:SW_TS-1088_XNP-MSW1, SW2
2TYPE-C-31-M-12usbc_female:CONN12_C-31-M-12_HROJ1, J2
110Resistor_SMD:R_0603_1608MetricR33
1100pCapacitor_SMD:C_0603_1608MetricC27
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR45
110mResistor_SMD:R_2512_6332MetricR40
110nCapacitor_SMD:C_0603_1608MetricC23
110uHsupercap_charger_inductor:SMDRI127100MTL3
112MR-1%24V_sense_r:RES-SMD_L6.4-W3.2_LR2512D-3W-1MRR9
12Resistor_SMD:R_0603_1608MetricR32
12.2uCapacitor_SMD:C_1206_3216MetricC43
1200kResistor_SMD:R_0603_1608MetricR2
120kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR46
1220nCapacitor_SMD:C_0603_1608MetricC30
1220pCapacitor_SMD:C_0603_1608MetricC31
122kResistor_SMD:R_0603_1608MetricR97
122nCapacitor_SMD:C_0603_1608MetricC32
12kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR20
1300kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR43
1464kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR83
15.62kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR76
16.2kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR62
17.15kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR92
1BAT54C,215supercap_charger_btst_diode:SOT-23D10
1BQ24640RVARsupercap_charger:RVA16_2P14X2P14U11
1CYA1265-6.8UH24V_inductor:IND-SMD_L12.8-W12.8-LS13.8_CYA1265L1
1CYPD3177-24LQXQTusbc-pd:QFN24_CYPD3177-24LQXQT_INFU8
1ESP32-S3-WROOM-1-N8R8esp32:ESP32S3WROOM1N8R8IC1
1LM4040A25IDBZRPackage_TO_SOT_SMD:SOT-23U51
1LM5155DSSR24V_boost_ic:WSON-12_L3.0-W2.0-P0.50-BL-EPU5

The 445 most common of 452 parts.

Similar boards

  • 4 layers275 × 240 mmSupervisor, the printed circuit board in 3D

    Supervisor

    BennetLeff/temper

    a breville control freak ++

    440 parts1
  • 4 layers120 × 120 mmDaq griffin, the printed circuit board in 3D

    Daq griffin

    cuspaceflight/white-giant-sensing-pcb

    This is the pcb used to read up to 12 4-20mA pressure transcievers that are used on the white giant engine

    223 partsGPL-3.0
  • 2 layers100 × 150 mmSubController, the printed circuit board in 3D

    SubController

    smileym4n-collab/Kicadprojects

    226 parts
  • 2 layers62 × 100 mmESP32-S3-HUB75-Driver, the printed circuit board in 3D

    ESP32-S3-HUB75-Driver

    wszeto9/ESP32-S3-HUB75-Driver

    This board serves as the Matrix Display driver for MIT's 2.007 gameboards in Spring 2024 and Spring 2025. The board can take 4 button inputs, Stemma-QT I2C sensors, and breaks out 8 GPIO pins for future use.

    137 parts3MIT
  • 6 layers100 × 140 mmMedical Imager, the printed circuit board in 3D

    Medical Imager

    yusufElnady/Medical-Imager

    This repository contains the PCB design for a 16-channel ultrasound imager based on the K26 SOM and the TX7516 pulser.

    514 parts
  • 4 layers99.5 × 69.3 mmUniversal Power Delivery and Control Board, the printed circuit board in 3D

    Universal Power Delivery and Control Board

    Oscyloskop444/RGB-LED-matrix

    Simple RGB led MATRIX with flexible size 10x10 - 20x20 based on WS2815F LEDs. It requires a power delivery adapter supporting 12v 2A minimum or direct 12v injection to the USB port to function.

    210 partsGPL-3.0

Questions

How big is the Tankervision pdb PCB?

It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Tankervision pdb use?

452 parts, built around the ESP32-S3-WROOM-1-N8R8, TPS51385RJNR, TVS2200DRVR and TS5A3159ADBVRE4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tankervision pdb KiCad files?

From the ikeefe12/tankervision-pdb repository on GitHub, at the commit this page was made from: the board is hardware/tankervision-pdb/tankervision-pdb.kicad_pcb and its schematic hardware/tankervision-pdb/tankervision-pdb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tankervision pdb design in my own project?

Its repository states no licence, so its author keeps all rights: ask ikeefe12 before reusing the design.