4 layers138.8 × 77 mm
4 layers80 × 120 mm
RC Car Project
Isaac-Muscat/RC-Car-PCB- Size
- 80 × 120 mm
- Copper layers
- 4
- Thickness
- 1.68 mm
- Parts
- 181
- Nets
- 189
- Pads
- 677
- Tracks, vias
- 1,194, 766
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Dec 2024
- Updated
- 20 Jul 2025
Overview
RC Car Project is an open-source printed circuit board by Isaac-Muscat, from the Isaac-Muscat/RC-Car-PCB repository on GitHub. It is a 4-layer board of 80 × 120 mm with 181 parts on 189 nets, routed with 1,194 tracks and 766 vias.
It is built around the SN74HC244PWRE4, INA229AQDGSRQ1 and LMR16030PDDA, with the BTN8982TA, USBLC6-2SC6 and 0.1UF 50V 5*11 among its other parts. Its parts include 72 resistors, 46 capacitors, 16 connectors, 9 transistors and 8 ICs. It belongs with the STM32 boards of this library.
Main components
9
SN74HC244PWRE4
TSSOP-20-40℃~+85℃ 20ns@6V,50pF 2V~6V 7.8mA 7.8mA 74HC 80uA Output enable Tri-State TSSOP-20 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffer/Driver/Transceiver
INA229AQDGSRQ1
VSSOP-10-0.5mm-300mV~85V -40℃~+125℃ 0.01uV/℃ 100pA 170dB 2.7V~5.5V 300nV 640uA High-side detection、Low-side detection、Bidirectional detection、Input filter、Power monitoring、Programmable threshold alarm、Integrated ADC ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense Amplifiers
LMR16030PDDA
SO-8-40℃~+125℃@(TJ) 1 2.5MHz 3A 4.3V~60V 40uA 800mV~50V Adjustable Buck Built-in No Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization Step-down type SO-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
BTN8982TA
TO-263-7-40℃~+150℃ 1 50A 8V~18V 欠压锁定、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection TO-263-7 Power Distribution Switches ROHSInfineon TechnologiesGate Drivers
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)0.1UF 50V 5*11
插件,5x11mm1000hrs@105℃ 100nF 11mm 1A@100kHz 2mm 50V 5mm 插件,5x11mm Aluminum Electrolytic Capacitors - Leaded ROHSCXAluminum Electrolytic Capacitors - Leaded
PMF250XNEX
SOT-323-55℃~+150℃ 1 N-channel 1.05nC@4.5V 1A 212mΩ@4.5V 275mW 30V 750mV 8.5pF 81pF SOT-323 MOSFETs ROHSNexperiaMOSFETs
PMEG060V100EPDZ
CFP-151 Independent 10A 210A 560mV@10A 60V 700uA@60V CFP-15 Schottky Diodes ROHSNexperiaSchottky Diodes
SF-3812F6000T-2
SMD,10.1x3.1mmDisposable FusesBourns
Parts
181| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 10k | Capacitor_SMD:C_0603_1608Metric | R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31 +8 |
| 17 | 0.1uF/10V | Capacitor_SMD:C_0603_1608Metric | C25, C26, C27, C28, C29, C30, C32, C33, C37, C38, C39, C40, C41, C42, C43, C44 +1 |
| 14 | 10k | Resistor_SMD:R_0603_1608Metric | R47, R48, R49, R50, R51, R52, R53, R56, R59, R62, R67, R68, R71, R72 |
| 8 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 7 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J5, J6, J7, J8, J9, J10, J16 |
| 5 | 10kohm | Resistor_SMD:R_0603_1608Metric | R5, R6, R14, R15, R42 |
| 4 | 0.1uF/50V | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10 |
| 4 | 0.51kohm | Resistor_SMD:R_0603_1608Metric | R55, R58, R61, R64 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R65, R66, R69, R70 |
| 4 | 10uF/10V | Capacitor_SMD:C_0603_1608Metric | C14, C16, C31, C35 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R54, R57, R60, R63 |
| 4 | BTN8982TA | Package_TO_SOT_SMD:TO-263-7_TabPin8 | Q2, Q3, Q4, Q5 |
| 4 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1, J2, J3, J4 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | PMF250XNE | Package_TO_SOT_SMD:SOT-23 | Q6, Q7, Q8, Q9 |
| 3 | 100kohm | Resistor_SMD:R_0603_1608Metric | R12, R41, R46 |
| 3 | 18pF/10V | Capacitor_SMD:C_0603_1608Metric | C20, C21, C22 |
| 2 | 0.1uF/16V | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 10ohm | Resistor_SMD:R_0603_1608Metric | R43, R44 |
| 2 | 1uF/16V | Capacitor_SMD:C_0603_1608Metric | C17, C19 |
| 2 | 1uF/50V | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 2.2uF/10V | Capacitor_SMD:C_0603_1608Metric | C23, C24 |
| 2 | 4.7uF/50V | Capacitor_SMD:C_1210_3225Metric | C3, C4 |
| 2 | 40kohm | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 47uF/10V | Capacitor_SMD:C_1210_3225Metric | C13, C15 |
| 2 | 5.11kohm | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 8.2uH | Inductor_SMD:L_Wuerth_MAPI-4030 | L1, L2 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric | C34, C36 |
| 2 | D_Schottky | Diode_SMD:Nexperia_CFP3_SOD-123W | D7, D8 |
| 2 | PMEG060V100EPD | Package_TO_SOT_SMD:Nexperia_CFP15_SOT-1289 | D5, D6 |
| 1 | 0.002 OHM | WSLP59312L000FEA:RES_WSLP5931_.002OHM_VIS | R73 |
| 1 | 0ohm | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 150kohm | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 1uF/10V | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 220ohm | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 2kohm | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 340kohm | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 5kohm | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 600ohm | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | ADC082S021CIMM/NOPB | footprints:MUA08A | U7 |
| 1 | ANT_IF | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J15 |
| 1 | C_Polarized | Inductor_THT:L_Radial_D12.0mm_P5.00mm_Neosid_SD12k_style2 | C46 |
| 1 | Conn_02x09_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x09_P2.54mm_Horizontal | J11 |
| 1 | Crystal | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Y1 |
| 1 | FerriteBead | Capacitor_SMD:C_0603_1608Metric | FB1 |
| 1 | INA229AQDGSRQ1 | footprints:VSSOP10_DGS_TEX | U6 |
| 1 | LMR16020PDDAR | footprints:DDA0008E_N | U3 |
| 1 | LMR16030PDDA | footprints:DDA0008E_N | U2 |
| 1 | MCU_IF | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J12 |
| 1 | PMOS | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | RF_IF | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J13 |
| 1 | SF-3812F6000T-2 | SF-3812F6000T-2:FUS_SF-3812F_BRN | F1 |
| 1 | SN74HC244PWR | footprints:PW20 | U8 |
| 1 | STM32H743VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW2 |
| 1 | USB4120-03-C_REVA | USB4120-03-C:GCT_USB4120-03-C_REVA | J14 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | ~ | FGH100M:FGH100MABMD | U5 |
The 174 most common of 181 parts.
More from Isaac-Muscat/RC-Car-PCB
1Similar boards
- 4 layers109.5 × 105.7 mm
- 4 layers100 × 100 mm
Tankervision pdb
ikeefe12/tankervision-pdb
Four-layer KiCad power distribution board for the TankerVision robot: USB-C PD / barrel-jack input, supercapacitor-backed rail for clean Jetson shutdown, and four firmware-controlled protected output ports.
452 parts - 4 layers85 × 90 mm
- 4 layers42 × 33 mm
Battery dc dc
TheCacophonyProject/battery-dc-dc-converter
Designed to step down the voltage from a scooter battery to 12V
30 partsGPL-3.0 - 2 layers21 × 26 mm
- 2 layers55.9 × 27.4 mm
Prototypemeasurement
GGoodacre/WindChargeController-Capstone2024
Solar Charge Controller for BEng Capstone 2024
3 parts1 - 4 layers101.9 × 66.3 mm
Mini climate control
MAIK97MAX/mini-climate-control
A miniature climate control unit which is remotely controlled
92 parts - 2 layers120.5 × 46 mm
Kampela E1
Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem
192 parts21GPL-3.0
Questions
How big is the RC Car Project PCB?
It measures 80 × 120 mm and has 4 copper layers, 1.68 mm thick.
What parts does the RC Car Project use?
181 parts, built around the SN74HC244PWRE4, INA229AQDGSRQ1, LMR16030PDDA and BTN8982TA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RC Car Project KiCad files?
From the Isaac-Muscat/RC-Car-PCB repository on GitHub, at the commit this page was made from: the board is RC-Car-Project/RC-Car-Project.kicad_pcb and its schematic RC-Car-Controller/Connectors_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RC Car Project design in my own project?
Its repository states no licence, so its author keeps all rights: ask Isaac-Muscat before reusing the design.