Skip to the content
123456789

LMR16030PDDA

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 2.5MHz 3A 4.3V~60V 40uA 800mV~50V Adjustable Buck Built-in No Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization Step-down type SO-8 DC-DC Converters ROHS

Part id
ti/LMR16030PDDA
Category
DC DC Converters
Package
SO-8
Pins
9
In stock
73 at JLCPCB (C544838)
Used on
3 open-source boards

Overview

The LMR16030PDDA is a DC DC Converter made by Texas Instruments in a SO-8 package with 9 pins. -40℃~+125℃@(TJ) 1 2.5MHz 3A 4.3V~60V 40uA 800mV~50V Adjustable Buck Built-in No Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization Step-down type SO-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LMR16030SDDA, from EasyEDA) and its footprint (EasyEDA_Cloud:SO-8_L4.9-W3.9-P1.27-LS6.0-BL-EP, from EasyEDA), ready for a KiCad board. 73 are in stock at JLCPCB (part C544838). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1BOOT2VIN3EN4RT/SYNC5FB6SS/PGOOD7GND8SW9EP
EasyEDA_Cloud:LMR16030SDDAFrom EasyEDA

Footprint

123456789
EasyEDA_Cloud:SO-8_L4.9-W3.9-P1.27-LS6.0-BL-EPFrom EasyEDA

Pinout

9
The pins of the LMR16030PDDA
PinNameType
1BOOTUnspecified
2VINUnspecified
3ENUnspecified
4RT/SYNCUnspecified
5FBUnspecified
6SS/PGOODUnspecified
7GNDUnspecified
8SWUnspecified
9EPUnspecified

Open-source boards using it

3
  • 4 layers42 × 33 mmBattery dc dc, the printed circuit board in 3D

    Battery dc dc

    TheCacophonyProject/battery-dc-dc-converter

    Designed to step down the voltage from a scooter battery to 12V

    30 partsGPL-3.0
  • 2 layers21 × 26 mmFishsense scout, the printed circuit board in 3D

    Fishsense scout

    UCSD-E4E/fishsense-scout-power

    21 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LMR16030PDDA?

Yes. The symbol is EasyEDA_Cloud:LMR16030SDDA and the footprint EasyEDA_Cloud:SO-8_L4.9-W3.9-P1.27-LS6.0-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LMR16030PDDA?

SO-8, with 9 pins. Its footprint is drawn on this page.

Where is the LMR16030PDDA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LMR16030PDDA?

JLCPCB lists it as part C544838, with 73 in stock; the sellers' links on this page open their listings.

What can replace the LMR16030PDDA?

Parts like it in the library: the AP64352SP by Diodes Incorporated, the TPS54627DDAR by Texas Instruments, the AP64500SP by Diodes Incorporated and the TPS54360BQDDARQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LMR16030PDDA?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.