Open-source KiCad boards

29 match “jbilander”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

4 layers17.4 × 51.4 mm
ReCIA
jbilander/ReCIA
A drop in replacement CIA for old Amiga Computers
9 parts14
2 layers33 × 33 mm
PLCC-84-Plug bottom
jbilander/PLCC-84-plug
A PLCC-84 plug adapter created out of PCBs
5 parts35CC-BY-SA-4.0
4 layers91.2 × 89.3 mm
ReAgnus devboard
jbilander/ReAgnus-devboard
A development board for ReAgnus
10 parts3CC-BY-SA-4.0
2 layers25.4 × 18 mm
A500 IDE LED board
jbilander/A500_IDE_LED_board
Amiga 500 Floppy LED to also Display IDE Activity
10 parts16CC-BY-SA-4.0
2 layers111.5 × 30.5 mm
A2000 Twisted Sister
jbilander/A2000_Twisted_Sister
A2000 Co-pro slot adapter. Lets you plug a regular A500 accelerator into an A2000
4 parts2CC-BY-SA-4.0
4 layers28.9 × 28.9 mm
Agnus
jbilander/ReAgnus
A drop-in replacement PCB for the Amiga Agnus chip
35 parts97CC-BY-SA-4.0
4 layers38 × 38 mm
ReBuster
jbilander/ReBuster
A drop in replacement PCB for the Super Buster chip
40 parts7CC-BY-SA-4.0
4 layers38 × 38 mm
Agnus
jbilander/ReAgnus
A drop-in replacement PCB for the Amiga Agnus chip
38 parts97CC-BY-SA-4.0
2 layers80 × 29.5 mm
A500 RGBtoHDMI
jbilander/A500_RGBtoHDMI
RGBtoHDMI CPLD-adapter-board for A500.
19 parts13GPL-3.0
4 layers17.4 × 51.4 mm
ReCIA AVR
jbilander/ReCIA
A drop in replacement CIA for old Amiga Computers
27 parts14
2 layers55 × 59 mm
Sdbox
jbilander/sdbox
A parallel to sd-card project for the Amiga
22 parts108GPL-3.0
4 layers25.1 × 81.9 mm
Base64
jbilander/Base64
A 68k carrier board in DIP-64 that takes the iCESugar-Pro-v1.3 FPGA module
34 parts33CC-BY-SA-4.0
4 layers38 × 38 mm
ReGary
jbilander/ReGary
A drop in replacement PCB for the Fat Gary chip
39 parts4CC-BY-SA-4.0
4 layers17.4 × 51.4 mm
ReCIA MAX10
jbilander/ReCIA
A drop in replacement CIA for old Amiga Computers
33 parts14
2 layers45 × 15 mm
A1200 IDE LED fix board
jbilander/A1200_IDE_LED_fix_board
A small PCB that fixes the IDE Activity LED always lit problem on the A1200.
6 parts5CC-BY-SA-4.0
2 layers128 × 25.4 mm
A500 86pin internal adapter
jbilander/A500_Edge_Expansion_adapter
A500 86pin edge connector adapter. Turns the expansion edge into a 86pin female socket inside the A500 case.
3 parts7CC-BY-SA-4.0
2 layers100 × 97.2 mm
JTAG Connect
jbilander/JTAG-Connect
A PCB for a Pogo Pin JTAG programmer clip - 2.00mm pin Pitch SMD-footprint target 2x5 or 2x3
20 parts2CC-BY-SA-4.0
2 layers47 × 50 mm
SDBox
jbilander/SDBox-v2
SDBox-v2 for Amiga, compatible with the new updated card-detect firmware
22 parts53GPL-3.0
4 layers52.5 × 60 mm
SDBox
jbilander/SDBox-v3
A parallel to Pico 2 W and sd-card project for the Amiga
23 parts15GPL-3.0
2 layers51 × 64 mm
LLCB
jbilander/Logic-level-converter-board
A bi-directional high-speed TTL-Compatible level shifter board 5V ⇄ 3V3 for tinkering
18 parts7GPL-2.0
2 layers36.1 × 34 mm
SDBox Mini
jbilander/SDBox-Mini
SDBox Mini for Amiga, compatible with the new updated card-detect firmware
29 parts28GPL-3.0
4 layers47 × 50 mm
Par2Ser
jbilander/Par2Ser
A device that bridges the Amiga parallel port to a USB FIFO (FT240X)
42 parts3CC-BY-SA-4.0
4 layers97 × 26.9 mm
Denise to FPGA
jbilander/Denise_to_FPGA
A small adapter-board that connects 12-bit RGB, 14 MHz CLK, PIXELSW and SYNC-signals on Denise to a FPGA-board via a 5V-tolerant buffer.
21 parts4CC-BY-SA-4.0
4 layers64 × 88.6 mm
SF500
jbilander/SF500
Spitfire 500, A low-end 14 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 500.
52 parts82CC-BY-SA-4.0