
Restore backup 2026-06-01T10-27-37-852
KavyanshKhaitan2/overenginnered-docking-station
A simple docking station to dock your laptop using USB-C!
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

KavyanshKhaitan2/overenginnered-docking-station
A simple docking station to dock your laptop using USB-C!

Lucasmoidel/pico-rand
I am using the pico-ssd1306 library to drive the display

R8bert/esp32-psu
A smart, programmable lab power supply controlled by an ESP32 microcontroller. This project combines hardware design and firmware development to provide precise, remote control over voltage and current using a…


simone-ingvild/AnomalyDetection
This repository implements Spatial PaDiM (Patch Distribution Modeling) for anomaly detection on printed circuit boards (PCBs) using photometric (multi-illumination) image stacks.

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.



deltabeard/DBGC
A Game Boy cartridge using the Raspberry Pi RP2040 with RTC and MBC support.

Breadstick-Innovations/22008-RP2040-Dev-Board
A 4-layer dev-board for the RP2040 with a focus on signal integrity and JLCPCB's basic components for affordable small runs using their SMT assembly service.

baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

shanna/pla_nck
A low profile split keyboard I built using Gateron KS-33 low profile switches.

MReavley/CyberSliceKeyboard
42/36 key ergo split keyboard using a RP2040

mathisschmieder/HL2-MRF101
Hermes-Lite2 Power Amplifier/Filter board using MRF-101



mcqn/nfc-st25r3916
An RFID/NFC reader using the ST Microelectronics ST25R3916 chip

alperyazar/isoUSBRS422
isoUSBRS422 is an isolated USB - RS422/RS485 converter. It is designed using KiCad. Repository includes KiCad project and necessary firmware files.

Keyaan-07/PicoKey
A FIDO2 based passkey using the RP2350A and in it's smallest form factor!

sahko123/Analog-Watch
A watch that tells time using an analog voltmeter needle driven by a DAC. No screen. No hands. Just vibes and a carefully calibrated lookup table.

kartik2406/rp2040-ble
A PCB that uses RP2040 MCU and HM-BT4502 BLE passthrough module. This enables the RP2040 to communicated with other devices using Bluetooth. The bluetooth module is connected via UART(0)

74th/esp32c3-iot-server-board
Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.


bikeNomad/fluke_884x_continuity_buzzer
Add-in continuity buzzer for the Fluke 8840A and 8842A multimeters using an RP2040 microcontroller