Skip to the content
2 layers38.1 × 49.5 mmEsp32c3-iot client board, the printed circuit board in 3D

Esp32c3-iot client board

74th/esp32c3-iot-server-board4

Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.

Size
38.1 × 49.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
31
Pads
140
Tracks, vias
373, 161
Pours
202
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Jul 2023
Updated
28 Sep 2024

Overview

Esp32c3-iot client board is an open-source printed circuit board by 74th, from the 74th/esp32c3-iot-server-board repository on GitHub, published under the MIT licence. It is a 2-layer board of 38.1 × 49.5 mm with 40 parts on 31 nets, routed with 373 tracks and 161 vias.

It is built around the ESP32-C3-WROOM-02-H4, AMS1117-3.3 and CH217K, with the SK6812MINI-E among its other parts. Its parts include 10 resistors, 8 capacitors, 3 ICs, 3 switches and 2 connectors. It belongs with the home automation and IoT and computers and single-board computers boards and the ESP32 and RISC-V boards of this library.

Main components

4

README

README.md

IoT Server Board - ESP32C3

Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.

ESP32-C3-WROOM-02 を使った Grove デバイスを IoT Server 化するためのボード。

74thが作成するファームウェアについてはこちら https://github.com/74th/esp32c3-iot-server-firmware

features

  • ESP32-C3 onboard for WiFi connectivity
  • Three Grove ports are equipped.
  • Selectable 5V or 3.3V VCC for Grove port
  • RGB LED for indicator
  • Button for operation
  • USB Type-C port for firmware rewriting

🇯🇵

  • ESP32-C3 搭載で、WiFi 接続が可能
  • Grove ポートを 3 ポート搭載
  • Grove ポートの VCC は 5V、3.3V を選択可能
  • インジケータ用の RGB LED 搭載
  • 操作用のボタン搭載
  • USB Type-C ポートで、ファームウェアの書き換え可能

v1.2.0

BOM

ReferenceNameQuantity
C1Capacitor 0805 1uF1
C2, C4Capacitor 0805 100nF2
C3, C5-C8Capacitor 0805 10uF5
CH1HY2.0 Socket SMD 4Pin - I2C1
CH2HY2.0 Socket SMD 4Pin - UART1
CH3HY2.0 Socket SMD 4Pin - GPIO1
D1RGBLED 3528 SK6812MINI-E1
J1Box Pin Header 2x3 Pitch 1.27mm1
J2USB Type-C Receptacle - USB2.0_C_v31
R1, R2Capacitor 0805 1kΩ (NC)2
R3, R4, R10Capacitor 0805 10kΩ3
R5, R9Capacitor 0805 5.1kΩ2
R6, R7Capacitor 0805 10Ω2
R8Capacitor 0805 56kΩ1
SW1Button SKRPABE0101
SW2Button SKRPABE0101
SW3Button SKRPABE0101
U1WiFi MCU Module ESP32-C3-WROOM-021
U2Regulator 3.3V SOT-223 AMS1117-3.31
U3USB Power Protection IC SOT-23-6L CH217K1

v1.1.1

BOM

ReferenceNameQuantity
C1Capacitor 0805 1uF1
C2, C3Capacitor 0805 100nF2
C4, C5Capacitor 0805 10uF2
CH1HY2.0 Socket SMD 4Pin - I2C1
CH2HY2.0 Socket SMD 4Pin - UART1
CH3HY2.0 Socket SMD 4Pin - GPIO1
D1RGBLED 3528 SK6812MINI-E1
F1PolyFuse 1812 KT6-1100SMDI (NC)1
J1Box Pin Header 2x3 Pitch 1.27mm1
J2USB Type-C Receptacle - USB2.0_C_v31
R1, R2, R5-R7Capacitor 0805 10kF5
R3, R4Capacitor 0805 5.1kF2
R8Capacitor 0805 42kF1
SW1Button SKRPABE0101
SW2Button SKRPABE0101
SW3Button SKRPABE0101
U1WiFi MCU Module ESP32-C3-WROOM-021
U2Regulator 3.3V SOT-223 AMS1117-3.31
U4USB Power Protection IC SOT-26 CH214K1

Parts

40
QtyValueFootprintReferences
510u$74th:Capacitor_0805_2012C3, C5, C6, C7, C8
4M2-Hole$74th:M2-HoleM1, M2, M3, M4
310k$74th:Capacitor_0805_2012R3, R4, R10
3Jumper_3_Open$74th:VCC_Selector_JumperJP1, JP2, JP3
2100n$74th:Capacitor_0805_2012C2, C4
21k(NC)$74th:Capacitor_0805_2012R1, R2
227.4$74th:Capacitor_0805_2012R6, R7
25.1k$74th:Capacitor_0805_2012R5, R9
11u$74th:Capacitor_0805_2012C1
156k$74th:Capacitor_0805_2012R8
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1BOOT$74th:SKRPABE010SW2
1CH217KPackage_TO_SOT_SMD:SOT-23-6U3
1ESP32-C3-WROOM-02$74th-imported:ESP32-C3-WROOM-02U1
1G3$74th:SKRPABE010SW1
1GPIO$74th:HY2.0_Socket_SMD_4PinCH3
1I2C$74th:HY2.0_Socket_SMD_4PinCH1
1LOGO$74th:74th-10mmG***
1Prog$74th:BoxPinHeader_2x03_P1.27mm_VerticalJ1
1RST$74th:SKRPABE010SW3
1SK6812MINI$74th:YS-SK6812MINI-E-BACK-RIGHTD1
1UART$74th:HY2.0_Socket_SMD_4PinCH2
1USB2.0_C_v3$74th:USB-C-12-Pin-MidMount-ali-v5J2

The 38 most common of 40 parts.

More from 74th/esp32c3-iot-server-board

2
  • 2 layers38.1 × 49.5 mmEsp32s3-iot client board, the printed circuit board in 3D

    Esp32s3-iot client board

    74th/esp32c3-iot-server-board

    Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.

    37 parts4MIT
  • 2 layers14 × 16.5 mmIr send, the printed circuit board in 3D

    Ir send

    74th/esp32c3-iot-server-board

    Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.

    10 parts4MIT

Similar boards

  • 2 layers138.4 × 67.3 mmTv side keyboard, the printed circuit board in 3D

    Tv side keyboard

    74th/tv-side-keyboard-SparrowTV

    TV Side Keyboard SparrowTV

    92 parts3MIT
  • 2 layers20 × 42.4 mm74TH G065-wifi keymouse, the printed circuit board in 3D

    74TH G065-wifi keymouse

    74th/74th-oshw-projects

    74th のPCBデータを公開しているプロジェクト

    27 parts1MIT
  • 2 layers183.2 × 65.1 mmMusa, the printed circuit board in 3D

    Musa

    rallekralle11/Musa

    Silly banana for scale PCB ruler, with functions

    92 parts1
  • 4 layers71.9 × 55.5 mmRISKYMSXCart, the printed circuit board in 3D

    RISKYMSXCart

    arkadiuszmakarenko/RISKYMSX

    RISKY MSX Cartridge based on WCH CH32V303V chip. It is 256KB cart programmed using USB Fat32 flash drive

    39 parts23
  • 2 layers80 × 50 mmHUB CH334U PCB, the printed circuit board in 3D

    HUB CH334U PCB

    openwch/ch334

    Share the schematic and layout (KiCad) for DIY USB2.0 4-PORTS HUB with CH334U

    36 parts14
  • 4 layers50 × 50 mmPdaltmode, the printed circuit board in 3D

    Pdaltmode

    AnterCreeper/pdaltmode

    USB Power Delivery Alt-mode Negotiation using CH32X035

    88 parts10LGPL-2.1
  • 2 layers119.4 × 67.3 mmAdapter, the printed circuit board in 3D

    Adapter

    liyuxuan3003/PrismGC

    基于ARM处理器的智能游戏机

    34 parts6

Questions

How big is the Esp32c3-iot client board PCB?

It measures 38.1 × 49.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32c3-iot client board use?

40 parts, built around the ESP32-C3-WROOM-02-H4, AMS1117-3.3, CH217K and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32c3-iot client board KiCad files?

From the 74th/esp32c3-iot-server-board repository on GitHub, at the commit this page was made from: the board is esp32c3-pcb/esp32c3-iot-client-board.kicad_pcb and its schematic esp32c3-pcb/esp32c3-iot-client-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32c3-iot client board design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).