
HUB CH334U PCB
openwch/ch334
Share the schematic and layout (KiCad) for DIY USB2.0 4-PORTS HUB with CH334U

基于ARM处理器的智能游戏机
Adapter is an open-source printed circuit board by liyuxuan3003, from the liyuxuan3003/PrismGC repository on GitHub. It is a 2-layer board of 119.4 × 67.3 mm with 34 parts on 130 nets, routed with 646 tracks and 39 vias.
It is built around the AZ1045-04F, CH217K and CH334U. Its parts include 9 connectors, 7 capacitors, 5 ICs, 4 resistors and 1 crystal. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 49.9 | Resistor_SMD:R_0603_1608Metric | RN0, RN1, RN2, RN3, RP0, RP1, RP2, RP3 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C6 |
| 3 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J3, P2, P3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | AZ1045-04F | Package_DFN_QFN:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U4, U5 |
| 2 | Conn_02x30_Odd_Even_Shielded | Connector_PinHeader_2.54mm:PinHeader_2x30_P2.54mm_Vertical | P1, P4 |
| 1 | 12MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 330uF | Capacitor_SMD:C_Elec_6.3x5.8 | C2 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_KoreanHropartsElec_PJ-320D-4A_Horizontal | J5 |
| 1 | CH217K | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | CH334U | Package_SO:SSOP-28_3.9x9.9mm_P0.635mm | U2 |
| 1 | DAP | liyuxuan:DAP | U3 |
| 1 | HDMI_A | Connector_HDMI:HDMI_A_Molex_208658-1001_Horizontal | J4 |
| 1 | Nunchunk | liyuxuan:Nunchunk | J2 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

openwch/ch334
Share the schematic and layout (KiCad) for DIY USB2.0 4-PORTS HUB with CH334U




gslee-dev/portpulse
USB replug test dongle with KiCad hardware, CH552 firmware, and native C host

MiSTle-Dev/Boards
Custom board designs for MiSTle projects

arkadiuszmakarenko/RISKYMSX
RISKY MSX Cartridge based on WCH CH32V303V chip. It is 256KB cart programmed using USB Fat32 flash drive

AnterCreeper/pdaltmode
USB Power Delivery Alt-mode Negotiation using CH32X035
It measures 119.4 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the AZ1045-04F, CH217K and CH334U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the liyuxuan3003/PrismGC repository on GitHub, at the commit this page was made from: the board is KiCad/Adapter/Adapter.kicad_pcb and its schematic KiCad/Adapter/Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask liyuxuan3003 before reusing the design.