Open-source KiCad boards

34 match “STMicroelectronics”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

2 layers32 × 48.6 mm
STLinkV3 Adapter
yingchaotw/STLinkV3_Adapter
This adapter board was designed to retain the STDC14 connector from stlink-v3.
11 parts9MIT
2 layers100 × 50 mm
IMU Board
phancak/IMU_Board
6-Axis IMU + Qvar Sensing Node with Edge AI capabilities. Specialized for high-accuracy motion tracking and charge-variation detection in modular embedded systems.
42 parts2MIT
4 layers60 × 60 mm
B VNH5019ATR W ENC ELITE BRK R1.0
Boardoza/Boardoza_VNH5019ATR_w-Enc_Elite_Breakout_Board
High-power H-bridge motor driver breakout board based on STMicroelectronics VNH5019A-E with integrated encoder interface and thermal heatsink design.
32 parts1CC-BY-SA-4.0
4 layers45.5 × 19.6 mm
Stm32 bluet pill
brendose/stm32_bluet_pill
This project is a 1.8V STM32WB55 Bluetooth Module with battery charging. The purpose of this project is to provide a development platform for mobile wearable devices.
93 parts1
4 layers163 × 83 mm
Voxboard
shadedvox/arsenal
A fully custom 6 degree-of-freedom robotic arm, built from the ground up across hardware, firmware, and mechanical design.
182 parts1Apache-2.0
4 layers106.7 × 50.8 mm
BE Elec S2
AurelienCapron/kicad-piezo-audio-amplifier
Conception sous KiCad 9 et caractérisation de deux cartes PCB CMS pour l'amplification audio d'un capteur piézoélectrique : préampli, filtre Baxandall (ST TSV912), Loudness et étages de puissance Classe AB (TS4871) et…
74 parts
4 layers
Voxboard
shadedvox/arsenal
A fully custom 6 degree-of-freedom robotic arm, built from the ground up across hardware, firmware, and mechanical design.
176 parts1Apache-2.0
2 layers100 × 80 mm
Solid state relays 12v
dragon-mobile/solid_state_relays_12v
The Solid State Relays - 12Volts is an open hardware solid state relay PCB aimed at the tiny home, van life and maker communities.
98 parts3CC-BY-SA-4.0
2 layers160 × 100 mm
MTS module
TU-Darmstadt-APQ/MTS_module
Module for AOM-based modulation transfer spectroscopy (MTS) signal generation.
131 parts3
4 layers100.5 × 61.3 mm
TanfolyamRobot
legokor/TanfolyamRobot
Korábban az STMicroelectronics által biztosított STM32CubeIDE-t használtuk a firmware fejlesztéséhez, azonban ez egy elég nehézkes és lassú eszköz.
79 parts2
2 layers160 × 100 mm
PDH module
TU-Darmstadt-APQ/PDH-module
Produces a PDH error-signal using MiniCircuits SYPD-1+ phase detector and LT1568 4th order low-pass filter. To be used with a AD9959 DDS board.
85 parts2
4 layers32.3 × 23.2 mm
STM tag
Harshul-Tripathi/asset-tracking-system
Industrial UWB tracking system and compact cell tag PCB, built with STMicroelectronics.
33 parts
2 layers21.7 × 48.8 mm
Dut isolation board
INTenX/test-controller-dut-isolation-module
Tester Add-On DC-DC converter module to allow isolation of DUT power domains for multi-channel applications
11 parts
2 layers33.3 × 36.5 mm
Mic
joshitha-c/microphone
A compact USB digital microphone development board built around the Raspberry Pi RP2040 microcontroller and the STMicroelectronics MP34DT05TR-A digital MEMS microphone.
28 parts
4 layers100 × 100 mm
Power feed
liorknafo/power-feed-manual-mill
DIY stepper power feed for a SIEG X3.5D mill: electromagnetic clutch, RP2040 controller PCB, Rust firmware, build123d CAD
195 parts
4 layers45 × 45 mm
FlightController
QuadFlyController/Electronics
A high-performance, compact, 4-layer flight controller PCB engineered for quadcopters and small UAVs. Built around the STMicroelectronics STM32F411CEU6 MCU, featuring high-rate low-noise motion sensing, barometric…
74 partsMIT
4 layers118.1 × 105.4 mm
PocketBeagleCommandStation SMD
RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters
172 parts
2 layers40.3 × 40.3 mm
Flight Controller
teosiangjun-png/Kicad-Flight-Controller
A custom, bare-metal quadcopter flight controller engineered around the STMicroelectronics STM32F722 MCU running Betaflight.
60 parts
2 layers115 × 72 mm
FcmlPanel
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
246 parts94BSD-3-Clause
2 layers100 × 36 mm
IotIron
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
98 parts94BSD-3-Clause
2 layers38 × 25 mm
JacdacKeyswitch
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
39 parts94BSD-3-Clause
2 layers60 × 80 mm
RobotCrawler
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
118 parts94BSD-3-Clause
2 layers226 × 74.4 mm
SevenSegment
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
119 parts94BSD-3-Clause
2 layers48 × 12 mm
SwdDebugger
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
44 parts94BSD-3-Clause