Skip to the content
4 layers32.3 × 23.2 mmSTM tag, the printed circuit board in 3D

Industrial UWB tracking system and compact cell tag PCB, built with STMicroelectronics.

Size
32.3 × 23.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
33
Nets
63
Pads
189
Tracks, vias
454, 62
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jul 2026
Updated
6 Aug 2026

Overview

STM tag is an open-source printed circuit board by Harshul-Tripathi, from the Harshul-Tripathi/asset-tracking-system repository on GitHub. It is a 4-layer board of 32.3 × 23.2 mm with 33 parts on 63 nets, routed with 454 tracks and 62 vias.

It is built around the DWM3000TR13 and BSS138. Its parts include 11 capacitors, 11 resistors, 3 ICs, 2 diodes and 1 transistor. It belongs with the radio and wireless boards and the STM32 boards of this library.

Main components

2

README

README.md

Anti-Theft Tracking

An industrial project developed in collaboration with STMicroelectronics to design and implement a highly accurate, multi-anchor asset tracking and anti-theft system utilizing Ultra-Wideband (UWB) technology that offers centimeter-level precision.

This repository contains the complete firmware, hardware PCB designs, and comprehensive documentation for the entire project lifecycle.


👥 Contributors

  • Krishang Singh - Hardware selection, Schematic and Layout design, Low-power optimization
  • Krishna Kumar Mahto - Firmware, Qorvo SDK, Breadboard testing (one way ranging)
  • Harshul Tripathi - MCU Pinout Architecture (CubeMX), AirTag Analysis, System Power Profiling

🏗️ System Architecture

The tracking ecosystem relies on a 4-subsystem architecture designed for precise trilateration and efficient power management. The system consists of three stationary anchors and one mobile tag:

1. STM32 Anchor (Hub)

  • Hardware: NUCLEO-U575ZI-Q + BU03 (UWB Module) + ST67W611M (Wi-Fi Module)
  • Role: Acts as the central hub of the tracking system. It interfaces with the tag and the secondary ESP32 anchors to compute the final location of the asset and manage the network. It publishes this data to a dashboard through the ST67W611M Wi-Fi module.
  • Location: firmware/stm32-anchor-hub/nucleo-u575zi-q_bu03/

2. ESP32 Anchors (x2)

  • Hardware: ESP32 + UWB Modules
  • Role: Two secondary stationary anchors strategically placed to provide the additional reference points required for accurate 2D/3D trilateration.
  • Location: firmware/esp32-anchors/

3. STM32 Tag

  • Hardware: NUCLEO-WBA55CG + BU03 (UWB Module) / Custom Compact PCB
  • Role: The mobile asset being tracked. Designed for a compact footprint, it broadcasts its signals to the anchor network.
  • Location: firmware/stm32-tag/Nucleo-WBA55CG_BU03/

📂 Repository Structure

The repository is modularized to separate different microcontrollers, hardware designs, and documentation, preventing workspace conflicts.

  • /docs: Contains all reference materials, component datasheets, project presentations, and research (including AirTag teardowns).
  • /firmware: Separated source code for the ESP-IDF and STM32CubeIDE workspaces. Each subsystem contains its own build instructions and configurations.
  • /hardware: Contains the custom compact tag PCB designs (KiCad/Altium). Includes standard EDA source files alongside a /production folder for manufacturing Gerbers and BOMs.

Parts

33
QtyValueFootprintReferences
647uCapacitor_SMD:C_1206_3216MetricC2, C3, C8, C10, C12, C17
3100kResistor_SMD:R_0402_1005MetricR1, R2, R4
210uCapacitor_SMD:C_0603_1608MetricC5, C7
21kResistor_SMD:R_0402_1005MetricR5, R6
22.5MResistor_SMD:R_0402_1005MetricR7, R8
2LEDLED_SMD:LED_0402_1005MetricD1, D2
10Resistor_SMD:R_0402_1005MetricR10
10.22uCapacitor_SMD:C_0402_1005MetricC11
10.47uCapacitor_SMD:C_0402_1005MetricC1
110kResistor_SMD:R_0402_1005MetricR3
116.2kResistor_SMD:R_0402_1005MetricR9
12.2uInductor_SMD:L_0603_1608MetricL1
122uCapacitor_SMD:C_0805_2012MetricC9
1330Resistor_SMD:R_0402_1005MetricR11
1BSS138Package_TO_SOT_SMD:SOT-23Q1
1Batt+TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmTP1
1Batt-TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmTP2
1BuzzerBuzzer_M7.5:AST0760_MALBZ1
1Conn_02x05_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ2
1DWM3000TR13new_dwm300_fp:DWM3000TR13IC1
1STM32WBA5MMGH6TRfootprints:SIP-LGA76_STMU3
1TPS63900Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm_ThermalViasU6

More from Harshul-Tripathi/asset-tracking-system

1
  • 2 layers152.4 × 101.6 mmPCB uwbmodule final, the printed circuit board in 3D

    PCB uwbmodule final

    Harshul-Tripathi/asset-tracking-system

    Industrial UWB tracking system and compact cell tag PCB, built with STMicroelectronics.

    2 parts

Similar boards

  • 4 layers36 × 36 mmWisp, the printed circuit board in 3D

    Wisp

    2shaurya4/wisp-daughter-board

    37 parts
  • 4 layers30 × 30 mmWearable imu, the printed circuit board in 3D

    Wearable imu

    davispe1/wearable-imu

    Node PCB — revision 1.0. 4-layer board (F.Cu, In1.Cu, In2.Cu, B.Cu).

    72 partsMIT
  • 2 layers54 × 34.3 mmPcb v2, the printed circuit board in 3D

    Pcb v2

    hvtran21/SWAN

    UMass Amherst ECE Senior Design Project - SWAN - A more secure and user centered solution to wireless access control.

    15 parts
  • 4 layers76 × 85 mmSuperNicePCB, the printed circuit board in 3D

    SuperNicePCB

    laemo10/SuperNicePCB

    An integrated, multi-sensor UWB anchor PCB designed for real-time indoor object tracking (via Double-Sided Two-Way Ranging) and non-invasive human presence/occupancy monitoring.

    68 parts
  • 2 layers85.6 × 54 mmUwm esp32, the printed circuit board in 3D

    Uwm esp32

    mlumobi/uwm-indoor-localization-project

    High precision indoor localization using Ultra Wide Band (UWB) technology.

    25 parts
  • 2 layers21.5 × 27.5 mmUwb radio, the printed circuit board in 3D

    Uwb radio

    tmb5932/fixed-wing-drone

    The basics needed to allow a RC plane to be turned autonomous on signal.

    9 parts
  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0

Questions

How big is the STM tag PCB?

It measures 32.3 × 23.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the STM tag use?

33 parts, built around the DWM3000TR13 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM tag KiCad files?

From the Harshul-Tripathi/asset-tracking-system repository on GitHub, at the commit this page was made from: the board is hardware/compact-tag-pcb/production/STM_tag.kicad_pcb and its schematic hardware/compact-tag-pcb/production/STM_tag.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM tag design in my own project?

Its repository states no licence, so its author keeps all rights: ask Harshul-Tripathi before reusing the design.