Skip to the content
123

L78L33ACU

STMicroelectronicsExtended

0℃~+125℃@(Tj) 1 1.7V 100mA 3.3V 30V 40uV 49dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/L78L33ACU
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-89-3
Pins
4
In stock
358,387 at JLCPCB (C14170)
Used on
12 open-source boards

Overview

The L78L33ACU is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a SOT-89-3 package with 3 pins. 0℃~+125℃@(Tj) 1 1.7V 100mA 3.3V 30V 40uV 49dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulators:REG3 1OUT-2GND-3IN, from CERN's library) and its footprint (Package_TO_SOT_SMD:SOT-89-3, from KiCad's library), ready for a KiCad board. 358,387 are in stock at JLCPCB (part C14170). 12 open-source boards in 11 repositories on GitHub use it.

Symbol

GNDIN3GND2OUT1
Regulators:REG3 1OUT-2GND-3INFrom CERN's library

Footprint

123
Package_TO_SOT_SMD:SOT-89-3From KiCad's library

From the datasheet

10
Supply, least
5.3 V · VI, min operating input at IO = 1 to 40 mA · p. 15
Supply, most
20 V · VI, max operating input at IO = 1 to 40 mA · p. 15
Supply, absolute maximum
30 V · VI, absolute max for VO = 3.3 to 9 V · p. 5
Junction, hottest
125 °C · AC operating junction temperature, max · p. 15
Takes working
6 mA · quiescent current, VI = 8.3 V, IO = 40 mA, TJ = 25 °C, max · p. 15
Gives
100 mA · continuous output current, max with adequate heat sink · p. 1
Output
3.3 V · fixed output, TJ = 25 °C, typical · p. 15
Dropout
1.7 V · IO = 40 mA, typical · p. 15
Junction to air (SOT-89)
55 K/W · junction to ambient, 6 cm² copper board heat sink, max · p. 5
Junction to case (SOT-89)
15 K/W · junction to case, max · p. 5

Open-source boards using it

12See all 12
  • 2 layers84 × 85 mmHbr mk2-rxtx, the printed circuit board in 3D

    Hbr mk2-rxtx

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    239 parts76MIT
  • 2 layers22.9 × 11.4 mmAutoEG2, the printed circuit board in 3D

    AutoEG2

    Ausdauersportler/IMAC-EFI-BOOT-SCREEN

    How to create an EFI boot screen vBIOS for Apple Late 2009 to Mid 2011 iMac systems using AMD MXM graphics cards

    13 parts57GPL-3.0
  • 2 layers34.8 × 67.3 mmCheapMesh, the printed circuit board in 3D

    CheapMesh

    joyel24/CheapMesh

    PCB for Heltec HT-CT62: ESP32-C3 + SX1262 lora cheap module. Useful to run MeshTastic. Forked from : https://gitlab.com/paulhausk/CheapMesh

    25 parts25
  • 2 layers112.6 × 85.4 mmRda5807m radio, the printed circuit board in 3D

    Rda5807m radio

    dilshan/rda5807m-receiver

    FM stereo radio receiver prototype with RDS

    64 parts23MIT
  • 2 layers100 × 50 mmBus raspberry pi, the printed circuit board in 3D

    Bus raspberry pi

    makerbus/bus_raspberry_pi

    Raspberry Pi that can be connected to a bus.

    47 parts
  • 2 layers101.2 × 70.8 mmIot telemetry scale pcb, the printed circuit board in 3D

    Iot telemetry scale pcb

    wbommel/iot-telemetry-scale-pcb

    This repository contains the KiCAD design files for the custom PCB used in the IoT Telemetry Scale project – a modular, networked weighing solution originally built to monitor the weights of budgies in an aviary. 🐦📡

    19 partsMIT
  • 2 layers34.9 × 69.2 mmRobot, the printed circuit board in 3D

    Robot

    AF-ROBOTICS/RoboticsLearningPlatform

    A learning platform for various Electrical and Computer Engineering concepts and techniques.

    28 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the L78L33ACU?

Yes. The symbol is Regulators:REG3 1OUT-2GND-3IN and the footprint Package_TO_SOT_SMD:SOT-89-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L78L33ACU?

SOT-89-3, with 3 pins. Its footprint is drawn on this page.

Where is the L78L33ACU datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the L78L33ACU?

JLCPCB lists it as part C14170, with 358,387 in stock; the sellers' links on this page open their listings.

What can replace the L78L33ACU?

Parts like it in the library: the AMS1117-3.3S by UMW, the HT7533-1 by UMW, the AMS1117-3.3 by GOODWORK and the CJA1117B-3.3 by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L78L33ACU?

12 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.