4 layers92.5 × 101.6 mm
2 layers32 × 48.6 mm
STLinkV3 Adapter
yingchaotw/STLinkV3_Adapter9This adapter board was designed to retain the STDC14 connector from stlink-v3.
- Size
- 32 × 48.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 29
- Pads
- 69
- Tracks, vias
- 220, 101
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Jun 2020
- Updated
- 2 Sep 2022
Overview
STLinkV3 Adapter is an open-source printed circuit board by yingchaotw, from the yingchaotw/STLinkV3_Adapter repository on GitHub, published under the MIT licence. It is a 2-layer board of 32 × 48.6 mm with 11 parts on 29 nets, routed with 220 tracks and 101 vias.
It is built around the STLINK-V3MODS. Its parts include 7 connectors, 2 resistors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdSTlinkV3-Adapter
Custom developed board that allow you to use the STlink-V3mini or STlink-V3MODS.
This adapter board was designed to retain the STDC14 connector from STlink-V3mini.
SWD connector
| Pin | Description |
|---|---|
| 1 | Target_VCC |
| 2 | Target_SWCLK |
| 3 | Target_GND |
| 4 | Target_SWDIO |
| 5 | Target_NRST |
| 6 | Target_SWO |
Preview of the board:
The newly designed interposer board has not passed production verification, be careful of to use the adapter.
PCB SAMPLE EXPERT
Rev 1.1 COMPANY
Rev 1.0 COMPANY
Prerequisite
STMicroelectronics Documents
Contact us
Please feel free to contact me if you need any further information.
Email: yingcaho.tw@gmail.com
Contributer
Thank @JojoS62 created a small box that can be 3D printed: https://www.thingiverse.com/thing:5101077
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0R/5% | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J5 |
| 2 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J4 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J7 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | LOGO | STLINK-V3MODS:GITHUB LOGO | G*** |
| 1 | STLINK-V3MODS | STLINK-V3MODS:MODULE_STLINK-V3MODS | U1 |
Similar boards
- 4 layers208 × 118 mm
SolenoidEngine4
atom-dispencer/SolenoidEngine4
My 4th attempt (though the first public one) at building a 4-cylinder USB-powered solenoid engine desk ornament.
121 parts - 4 layers99 × 82.4 mm
- 6 layers54.8 × 39.2 mm
- 4 layers
LightProcessor preFreeRoute
K0iNguyen/LightProcessor
PCB code and design for Optical chemical potential mapping research at Zeng Lab, Purdue University.
131 parts - 2 layers31.6 × 45.3 mm
- 6 layers100 × 70 mm
- 2 layers18.5 × 43.5 mm
Stlinkv3mods
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
14 parts14Apache-2.0
Questions
How big is the STLinkV3 Adapter PCB?
It measures 32 × 48.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STLinkV3 Adapter use?
11 parts, built around the STLINK-V3MODS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STLinkV3 Adapter KiCad files?
From the yingchaotw/STLinkV3_Adapter repository on GitHub, at the commit this page was made from: the board is Main_Circuit/STLinkV3_Adapter.kicad_pcb and its schematic Main_Circuit/STLinkV3_Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STLinkV3 Adapter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).