Skip to the content

Open-source KiCad boards

313 match “Red LED 0603”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 4 layers43 × 43 mmLED Redesign Design1, the printed circuit board in 3D

    LED Redesign Design1

    vt-aoe-nanosat-avionics/Hokie-Sat-Experimental-Board-Design

    This repository gives the updated board design of the ta-expt (Or newly renamed Hokie Sat Experimental Board) with 3 different board designs.

    56 parts
  • 2 layers28.6 × 5.3 mmSMD Lauflicht 0805-0603 v1 1, the printed circuit board in 3D

    SMD Lauflicht 0805-0603 v1 1

    Binary-Kitchen/SMD_Lauflicht

    The running light is achieved by a circuit of a clockgenerator NE555 (U1) and two shift registers TI4017 (U2, U3). The NE555 uses the clock signal to shift one bit through both shift registers.

    55 partsCC0-1.0
  • 4 layers14 × 11 mmLED Status x3, the printed circuit board in 3D

    LED Status x3

    AnotherMike-exe/KiCadBlocks

    Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

    6 partsMIT
  • 4 layers118 × 76 mmSmart led badge, the printed circuit board in 3D

    Smart led badge

    zgeez/Pixel-Badge

    Wearable 32x32 LED badge with Zephyr firmware, BLE control, passive NFC, and a Flutter Android app, built around a custom nRF52840 PCB.

    1,236 partsMIT
  • 2 layers19.9 × 11 mmRedesc ma, the printed circuit board in 3D

    Redesc ma

    goktugh/robotbits

    Some bits for robots or other control applications

    13 parts
  • 2 layers40 × 40 mmB ROTARY ENCODER BRK-01MBR R1.0, the printed circuit board in 3D

    B ROTARY ENCODER BRK-01MBR R1.0

    Boardoza/Boardoza_Rotary_Encoder_ARGB_Control_Breakout_Board

    Boardoza ROTARY ENCODER EC1101S is a rotary encoder breakout board with an integrated push button and addressable RGB LEDs, designed for interactive visual control and user input applications.

    42 partsCC-BY-SA-4.0
  • 8 layers84 × 59.6 mmSTMP157-OLinuXino LIME2 Rev B1, the printed circuit board in 3D

    STMP157-OLinuXino LIME2 Rev B1

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    422 parts1.5k
  • 6 layers56 × 56 mmMoteus x1, the printed circuit board in 3D

    Moteus x1

    mjbots/moteus

    Brushless DC motor controller

    187 parts1.4kApache-2.0
  • 2 layers101.5 × 83 mmSd2snes, the printed circuit board in 3D

    Sd2snes

    mrehkopf/sd2snes

    SD card based multi-purpose cartridge for the SNES

    154 parts722GPL-2.0
  • 4 layers28 × 80 mmESP32-PoE Rev M, the printed circuit board in 3D

    ESP32-PoE Rev M

    OLIMEX/ESP32-POE

    ESP32 IoT development board with 100Mb Ethernet and 802.3 Power Over Ethernet (POE)

    142 parts415Apache-2.0
  • 2 layers50.8 × 62.2 mmESP32-GATEWAY Rev I, the printed circuit board in 3D

    ESP32-GATEWAY Rev I

    OLIMEX/ESP32-GATEWAY

    ESP32 IoT Gateway board with BLE WIFI and Ethernet

    111 parts322Apache-2.0
  • 2 layers75.2 × 74.7 mmESP32-EVB Rev K2, the printed circuit board in 3D

    ESP32-EVB Rev K2

    OLIMEX/ESP32-EVB

    ESP32 WiFi / BLE Development board with Ethernet interface, Relays, microSD card

    170 parts287Apache-2.0
  • 4 layers28 × 98.2 mmESP32-PoE ISO Rev N1, the printed circuit board in 3D

    ESP32-PoE ISO Rev N1

    OLIMEX/ESP32-POE-ISO

    ESP32 Power Over Ethernet board with 3000VDC Galvanic insulation

    146 parts145
  • 2 layers36.5 × 56 mmFoc driver, the printed circuit board in 3D

    Foc driver

    sirojudinMunir/sf-motion

    Open-source Motion Control Platform

    132 parts135MIT
  • 4 layers100 × 83 mmModule17-Mainboard, the printed circuit board in 3D

    Module17-Mainboard

    M17-Project/Module_17

    M17 modem board for 9600-baud capable radios

    209 parts129CERN-OHL-W-2.0
  • 4 layers50 × 50 mmICE40HX1K EVB Rev B, the printed circuit board in 3D

    ICE40HX1K EVB Rev B

    OLIMEX/iCE40HX1K-EVB

    FPGA development board made with KiCAD

    85 parts123Apache-2.0
  • 4 layers142 × 119.7 mmQMTech MiSTeX, the printed circuit board in 3D

    QMTech MiSTeX

    MiSTeX-devel/MiSTeX-hardware

    Hardware for MiSTeX

    247 parts73
  • 2 layers106 × 107.5 mmPingban, the printed circuit board in 3D

    Pingban

    wujique/F1C200S_HDK

    F1C200S PCB and SCH

    542 parts73
  • 4 layers99 × 55 mmAes50 trion, the printed circuit board in 3D

    Aes50 trion

    YetAnotherElectronicsChannel/AES50

    An IP-Core for AES50 protocol

    213 parts67GPL-3.0
  • 4 layers161.6 × 100 mmNubus to ztex, the printed circuit board in 3D

    Nubus to ztex

    MelkhiorVintageComputing/NuBusFPGA

    Stuff to put a FPGA in a NuBus Macintosh

    103 parts63
  • 4 layers30 × 18 mmFdcanusb, the printed circuit board in 3D

    Fdcanusb

    mjbots/fdcanusb

    fdcanusb adapter

    36 parts42Apache-2.0
  • 4 layers62 × 50 mmS3-OLinuXino Rev A, the printed circuit board in 3D

    S3-OLinuXino Rev A

    OLIMEX/S3-OLinuXino

    IP Camera with S3 SOC from Allwinner, PoE Gigabit, LCD, micro SD, Flash

    233 parts41GPL-3.0
  • 4 layers160 × 110 mmHPM6E00FULLPORTRevB, the printed circuit board in 3D

    HPM6E00FULLPORTRevB

    hpmicro/hpm_apps

    hpm apps for hpm sdk

    726 parts35BSD-3-Clause
  • 8 layers125 × 80 mmSONATA ONE, the printed circuit board in 3D

    SONATA ONE

    newaetech/sonata-pcb

    Design files and associated documentation for Sonata PCB, part of the Sunburst Project

    470 parts22Apache-2.0

Parts matching “Red LED 0603”

See them in the parts library