
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

FPGA development board made with KiCAD
ICE40HX1K EVB Rev B is an open-source printed circuit board by OLIMEX, from the OLIMEX/iCE40HX1K-EVB repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 50 × 50 mm with 85 parts on 96 nets, routed with 2,527 tracks and 279 vias.
It is built around the SMBJ6.0A. Its parts include 28 capacitors, 19 resistors, 5 ICs, 5 diodes and 2 inductors. It belongs with the FPGA and CPLD boards of this library.
FPGA development board made with KiCAD
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | OLIMEX_RLC-FP:C_0402_5MIL_DWS | C3, C11, C12, C13, C14, C15, C16, C17, C18, C21, C22, C23, C24, C25, C26, C28 +1 |
| 6 | 10k | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R1, R4, R11, R15, R16, R17 |
| 6 | 22uF/6.3V/0603 | OLIMEX_RLC-FP:C_0603_5MIL_DWS | C1, C2, C7, C8, C9, C10 |
| 4 | 2.2k | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R2, R12, R13, R14 |
| 4 | 22R | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R3, R9, R10, R18 |
| 4 | Mounting_hole_3.3mm | OLIMEX_Other-FP:Mounting_hole_3.3mm | MountingHole, MountingHole, MountingHole, MountingHole |
| 3 | OLIMEX_Other-FP:Fiducial1x3 | , , | |
| 3 | 4.99k/1% | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R5, R7, R8 |
| 3 | LED/Red/0603 | OLIMEX_LEDs-FP:LED_0603_KA | LED1, LED2, PWRLED1 |
| 3 | NA(100nF) | OLIMEX_RLC-FP:C_0402_5MIL_DWS | C19, C20, C27 |
| 3 | Opened | OLIMEX_Jumpers-FP:SJ | 3.3V_E1, RxD_E1, TxD_E1 |
| 3 | T1107A(6x3,8x2,5MM) | OLIMEX_Buttons-FP:T1107A(6x3,8x2,5MM) | BUT1, BUT2, RESET1 |
| 2 | 2.2uH/1.5A/DCR<0.1R/CD32 | OLIMEX_RLC-FP:CD32 | L1, L2 |
| 2 | 47uF/6.3V/0805 | OLIMEX_RLC-FP:C_0805_5MIL_DWS | C5, C6 |
| 2 | SY8009AAAC(SOT23-5) | OLIMEX_IC-FP:SOT-23-5 | U2, U3 |
| 1 | OLIMEX_LOGOs-FP:OLIMEX_LOGO_TB | ||
| 1 | OLIMEX_LOGOs-FP:LOGO_PBFREE | ||
| 1 | OLIMEX_LOGOs-FP:LOGO_OPENHARDWARE_8x8 | ||
| 1 | OLIMEX_LOGOs-FP:LOGO_RECYCLEBIN_1 | ||
| 1 | 1.1k/1% | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R6 |
| 1 | 1N5819(S4SOD-123) | OLIMEX_Diodes-FP:SOD-123_1C-2A_KA | D2 |
| 1 | BH10S | OLIMEX_Connectors-FP:UEXT_ML10 | PGM1 |
| 1 | BH34R | OLIMEX_Connectors-FP:BH34R | GPIO1 |
| 1 | ICE40HX1K-VQ100(VQFP100) | OLIMEX_IC-FP:VQFP100_Pitch-0.5mm_Dimensions-16.00x16.00x1.20mm | U4 |
| 1 | K6R4016V1D-TC10(TSOP-44) | OLIMEX_IC-FP:TSOP-44_Pitch-0.80mm_18.80x11.80x1.20mm | U5 |
| 1 | LED/Green/0603 | OLIMEX_LEDs-FP:LED_0603_KA | CDone1 |
| 1 | NA(22R) | OLIMEX_RLC-FP:R_0402_5MIL_DWS | R19 |
| 1 | NA(5025) | OLIMEX_Devices-FP:FUSE-5025 | FUSE1 |
| 1 | Oscillator-100MHZ_TXC-7W | OLIMEX_Crystal-FP:Oscillator_7.0x5.0mm | CR1 |
| 1 | PWRJ-2mm(YDJ-1136) | OLIMEX_Connectors-FP:PWRJ-2mm(YDJ-1136) | PWR1 |
| 1 | SMBJ6.0A | OLIMEX_Diodes-FP:DO214AA | D1 |
| 1 | TESTPAD | OLIMEX_Other-FP:TEST_PAD40x70_SQUARE | GND1 |
| 1 | Val** | OLIMEX_LOGOs-FP:LOGO_ANTISTATIC_1 | Ref** |
| 1 | Val** | OLIMEX_LOGOs-FP:LOGO_ROHS_1 | Ref** |
| 1 | W25Q16BVSSIG(SOIC-8_208mil) | OLIMEX_IC-FP:SO-8_208mil | U1 |

mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

voltlog/esp32-aquarium-controller
ESP32 based aquarium/terrarium controller

baldengineer/Banana-Plug-Adapters
Bench Power Supply Adapters for common connectors

MostlyBuilds/speaker-pod-pcb
This is a PCB design for an ESP32-based speaker controller

OpenSkyHawk/OpenSkyhawk
DCS A-4E Skyhawk home cockpit — 3D-printed panels, custom PCBs, STM32/RP2040 firmware

PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.


sbarisic/MagMouse
Open source hall-effect based mouse - no mechanical contacts - no failure points
It measures 50 × 50 mm and has 4 copper layers, 1.5 mm thick.
85 parts, built around the SMBJ6.0A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OLIMEX/iCE40HX1K-EVB repository on GitHub, at the commit this page was made from: the board is iCE40HX1K-EVB_Rev_B.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).