2 layers34.3 × 26.6 mm
Banana to USB C Adapter v2
baldengineer/Banana-Plug-Adapters
Bench Power Supply Adapters for common connectors
32 parts12MIT
2 layers34.3 × 26.6 mm
Banana to Barrel Jack Adapter
baldengineer/Banana-Plug-Adapters12Bench Power Supply Adapters for common connectors
- Size
- 34.3 × 26.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 4
- Pads
- 53
- Tracks, vias
- 4, 12
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Jan 2023
- Updated
- 20 Oct 2024
Overview
Banana to Barrel Jack Adapter is an open-source printed circuit board by baldengineer, from the baldengineer/Banana-Plug-Adapters repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.3 × 26.6 mm with 32 parts on 4 nets, routed with 4 tracks and 12 vias.
It is built around the SMBJ6.0A. Its parts include 3 diodes, 3 connectors and 2 resistors. It belongs with the interfaces and adapters boards of this library.
Main components
1README
banana to barrel jack/README.mdBanana Plus to Barrel Jack Adapter
This design is intended for center positive.
The intended barrel jack is the GCT_DCJ200-10-A. However, several others will fit.
Discuss on Discord
Join the AddOhms/Baldengineer Discord to discuss this project
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | , , , , , , | ||
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | Green | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Negative | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Negative | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H2 |
| 1 | Positive | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Positive | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1 |
| 1 | SMBJ6.0A | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D3 |
The 17 most common of 32 parts.
More from baldengineer/Banana-Plug-Adapters
2- 2 layers34.3 × 26.6 mm
Banana to USB Adapter
baldengineer/Banana-Plug-Adapters
Bench Power Supply Adapters for common connectors
29 parts12MIT
Similar boards
- 4 layers50 × 50 mm
- 2 layers104.8 × 72.1 mm
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers122 × 86 mm
Voltlog ESP32 Relay Controller
voltlog/esp32-aquarium-controller
ESP32 based aquarium/terrarium controller
68 parts23GPL-3.0 - 2 layers86.2 × 50.2 mm
MostlyBuildsSpeakerPod
MostlyBuilds/speaker-pod-pcb
This is a PCB design for an ESP32-based speaker controller
93 parts3CC-BY-SA-4.0 - 2 layers96.6 × 63.9 mm
PDU
OpenSkyHawk/OpenSkyhawk
DCS A-4E Skyhawk home cockpit — 3D-printed panels, custom PCBs, STM32/RP2040 firmware
72 parts3 - 6 layers268 × 230 mm
Rf board
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
357 parts2CERN-OHL-S-2.0 - 4 layers115 × 65 mm
- 2 layers238 × 114 mm
Panel
sbarisic/MagMouse
Open source hall-effect based mouse - no mechanical contacts - no failure points
384 parts2
Questions
How big is the Banana to Barrel Jack Adapter PCB?
It measures 34.3 × 26.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Banana to Barrel Jack Adapter use?
32 parts, built around the SMBJ6.0A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Banana to Barrel Jack Adapter KiCad files?
From the baldengineer/Banana-Plug-Adapters repository on GitHub, at the commit this page was made from: the board is banana to barrel jack/Banana to Barrel Jack Adapter.kicad_pcb and its schematic banana to barrel jack/Banana to Barrel Jack Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Banana to Barrel Jack Adapter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).