
BlockBuilder
AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs
LED Status x3 is an open-source printed circuit board by AnotherMike-exe, from the AnotherMike-exe/KiCadBlocks repository on GitHub, published under the MIT licence. It is a 4-layer board of 14 × 11 mm with 6 parts on 7 nets, routed with 11 tracks and 7 vias.
It is built around the RC0603FR-07330RL, 150060AS75000 and 150060VS75000, with the 150060RS75000 among its other parts. Its parts include 3 resistors and 3 diodes.
Reusable PCB layout blocks for Plum Solutions boards. Nine schematic design blocks exist. Each one gets a matching layout so a host project can drop in the parts, the routing and the copper pours already proven on a reference board.
| Artefact | Where | Role |
|---|---|---|
| Reference board | Modules/<Block>/ | the worked example, and the test bed |
| Design block fragment | PlumBlocks.kicad_blocks/<Block>.kicad_block/ | the droppable asset |
| Host setup document | Modules/<Block>/docs/Host-Setup.md | the stackup, net classes and rules a fragment cannot carry |
The fragment lives outside this repository, in the shared library on the Plum
volume. See docs/ARCHITECTURE.md.
| Block | Schematic | Layout | Fragment |
|---|---|---|---|
PoE-Ethernet-Si3402-W5500 | done | done | done, placement tested |
Ethernet-W5500-Magjack | done | not started | — |
RF-CC1101-433 | done | not started | — |
MCU-ESP32S3-MINI | done | not started | — |
PowerMux-TPS2121 | done | not started | — |
Buck-5V-3V3-TPS563208 | done | not started | — |
LDO-RF-3V3-AP2112K | done | not started | — |
USBC-Device-ESD | done | not started | — |
LED-Status-x3 | done | not started | — |
PoE-PD-Si3402-Class1 is retired. PoE always arrives on an Ethernet cable, so a
PoE block with no jack was never a drop-in part.
docs/ARCHITECTURE.md — how the repository fits togetherdocs/CONTEXT.md — the domain words this project usesdocs/Design-Blocks-Runbook.md — how a block is built and what breaksModules/PoE-Ethernet-Si3402-W5500/docs/Layout-Spec.md — the worked exampleKiCad 10.0.6 or later. The Plum volume must be mounted, because the design block library and the shared footprints live on it.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | Amber 605nm 0603 | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Green 570nm 0603 | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Red 625nm 0603 | LED_SMD:LED_0603_1608Metric | D3 |

AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs

mikegoelzer/ESP32-Remote-USB-HID
USB dongle for remote emulation of USB HID keyboard and other server board control signals

KaitoTLex/RoboRyo
This is team1280's replacement for the Robo Rio for more redundant and less annoying controls.


oxidecomputer/hw-lpc55-carrier
Daughterboard which plugs into the Gemini Bringup Board (and gimletlet's carrier-carrier) and provides an LPC55 (root of trust microcontroller)


BetzDrive/interface-board
Power and signal conditioning board for the Betz Drive system

Autodrop3d/AD3D-Connect-Board
Universal control board for Autodrop3d printers

AnasSarkiz/Game-Boy-Enhance
AGBM-02 tscircuit adaptation — routing-disabled placement work in progress
It measures 14 × 11 mm and has 4 copper layers, 1.6 mm thick.
6 parts, built around the RC0603FR-07330RL, 150060AS75000, 150060VS75000 and 150060RS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AnotherMike-exe/KiCadBlocks repository on GitHub, at the commit this page was made from: the board is Modules/LED-Status-x3/LED-Status-x3.kicad_pcb and its schematic BlockBuilder/BlockBuilder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).