Skip to the content

Open-source KiCad boards

212 match “CM4”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 4 layers66.3 × 40.2 mmCm4 drone, the printed circuit board in 3D

    Cm4 drone

    dridri/bcflight

    Raspberry Pi based drone flight controller and remote control

    56 parts175GPL-3.0
  • 4 layers128.5 × 40 mmScalenode cm4-baseboard, the printed circuit board in 3D

    Scalenode cm4-baseboard

    antmicro/scalenode-cm4-baseboard

    Baseboard for Raspberry Pi 4 Compute Module optimized for clustering

    146 parts152Apache-2.0
  • 4 layers90 × 40 mmCm4-carrier net, the printed circuit board in 3D

    Cm4-carrier net

    jkiv/cm4-carriers

    KiCad design files for various Raspberry Pi Compute Module 4 (CM4) carrier boards.

    45 parts130BSD-2-Clause
  • 4 layers118 × 117 mmCm4-robot, the printed circuit board in 3D

    Cm4-robot

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    268 parts81
  • 2 layers142.1 × 106 mmPi CM4 16, the printed circuit board in 3D

    Pi CM4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    118 parts78
  • 4 layers36.8 × 38.1 mmCm4 ipad display adapter, the printed circuit board in 3D

    Cm4 ipad display adapter

    EvanKrall/pipad

    A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.

    29 parts60
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51
  • 2 layers114 × 102 mmRpi cm4-switch board, the printed circuit board in 3D

    Rpi cm4-switch board

    sequoia-hope/rpi-cm4-switch-board

    A Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board with integrated gigabit switch

    94 parts45
  • 6 layers76 × 56 mmCM4 MANET, the printed circuit board in 3D

    CM4 MANET

    ties1887/Mesh-radio-Halow-LoRa

    Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.

    122 parts40
  • 6 layers107 × 68 mmCm4-baseboard, the printed circuit board in 3D

    Cm4-baseboard

    antmicro/cm4-baseboard

    Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout

    516 parts36Apache-2.0
  • 4 layers249.5 × 95 mmEEZ BB3 CM4 R1B0, the printed circuit board in 3D

    EEZ BB3 CM4 R1B0

    intergalaktik/bb3-cm4

    CM4 compatible MCU board

    251 parts35
  • 4 layers40 × 55 mmCM4 Carrier, the printed circuit board in 3D

    CM4 Carrier

    xwlred/OpenHD-CM4-Carrier-Board

    [Shelved] RPI CM4 carrier for use in OpenHD

    73 parts14LGPL-2.1
  • 4 layers114 × 99 mmCM4 PiStorm32Lite, the printed circuit board in 3D

    CM4 PiStorm32Lite

    PiStorm/cm4board

    CM4 adapter board for PS32-lite and classic PiStorm

    47 parts13MIT
  • 4 layers47 × 33 mmRpi cm4-csi adapter, the printed circuit board in 3D

    Rpi cm4-csi adapter

    antmicro/raspberry-pi-cm4-csi-adapter

    This repository contains open hardware design files for an adapter board allowing to connect video accessories developed by Antmicro to a Raspberry Pi CM4 IO Board over a 22-pin FFC connector.

    19 parts10Apache-2.0
  • 4 layers71.8 × 66 mmMinimal carrier board for CM4 rev E, the printed circuit board in 3D

    Minimal carrier board for CM4 rev E

    RobertLukan/rpi-cm4-custom-board

    Based on my previous projects I needed a customized RPI4 carrier board with 2 cameras input. The initial idea was taken from this project…

    45 parts8
  • 6 layers52 × 43 mmCm4-lvds adapter, the printed circuit board in 3D

    Cm4-lvds adapter

    antmicro/cm4-baseboard-lvds-adapter

    Adapter board converting MIPI DSI into LVDS with additional circuitry for integrating custom displays

    155 parts7Apache-2.0
  • 4 layersCm4 ipad display adapter, the printed circuit board in 3D

    Cm4 ipad display adapter

    EvanKrall/cm4_ipad_display_adapter

    Circuit that converts the video outputs of the Raspberry Pi CM4 to the DisplayPort and LVDS signals the iPad 1 wants.

    16 parts6
  • 4 layers57 × 74.3 mmCM4, the printed circuit board in 3D

    CM4

    ybabs/H745FCS

    Quadcopter Flight Controller based on the dual core STM32H745 Microcontroller

    101 parts6
  • 4 layers76.3 × 54.3 mmCM4, the printed circuit board in 3D

    CM4

    ybabs/PorpDAQ

    Design Files for a STM32-Based Underwater Acoustics data acquisition board for harbour porpoises

    113 parts6MIT
  • 4 layers170.2 × 92 mmCM4 JBOD Control Board, the printed circuit board in 3D

    CM4 JBOD Control Board

    ApplePie420/OpenJBOD-CM4

    This project is heavily inspired by the work of TheGuyDanish, specifically his OpenJBOD thingamajig.

    78 parts3
  • 2 layers81.8 × 55.4 mmCm4-digipi carrier, the printed circuit board in 3D

    Cm4-digipi carrier

    hemna/cm4-digipi-carrier

    Raspberry Pi CM4 Carrier board for Ham radio PTT Control

    52 parts3
  • 4 layers40 × 55 mmCopterCat cm4, the printed circuit board in 3D

    CopterCat cm4

    matveylapin/CopterCat_cm4

    Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.

    164 parts3Apache-2.0
  • 4 layers65 × 56 mmULX4M CM4-HAT, the printed circuit board in 3D

    ULX4M CM4-HAT

    intergalaktik/ULX4M-CM4-HAT

    On V1 we have FTDI to FPGA working and we can upload bitstream to FPGA, serial passtrue is also working. For some reason it was hard to put ESP32 into bootloader mode, and I was not able to load micropython while shiled…

    41 parts2GPL-3.0
  • 4 layers70.1 × 122.2 mmGbc cm4-aio, the printed circuit board in 3D

    Gbc cm4-aio

    will-tm/gbc-cm4-aio

    This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits.

    130 parts2

Parts matching “CM4”

See them in the parts library