
Cm4 ipad display adapter
EvanKrall/pipad
A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.

Circuit that converts the video outputs of the Raspberry Pi CM4 to the DisplayPort and LVDS signals the iPad 1 wants.
Cm4 ipad display adapter is an open-source printed circuit board by EvanKrall, from the EvanKrall/cm4_ipad_display_adapter repository on GitHub. It is a 4-layer board with 16 parts on 73 nets, routed with 636 tracks and 29 vias.
It is built around the SN65DSI83TPAPRQ1 and MIC5504-1.8YM5-TR. Its parts include 11 capacitors, 3 connectors and 2 ICs. It belongs with the computers and single-board computers and lEDs and displays boards and the Raspberry Pi (Linux) boards of this library.
Work continues in my pipad repo.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C4, C5, C6, C7, C8, C9, C11, C12, C13 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x22_Female | Connector_FFC-FPC:Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal | J1 |
| 1 | Conn_01x34_Female | footprints:20474-030E-11 | J3 |
| 1 | MIC5504-1.8YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SN65DSI83TPAPRQ1 | footprints:SN65DSI83TPAPRQ1 | U1 |

EvanKrall/pipad
A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.





cr1tbit/GNI-plutoclocker
This device serves a couple of roles: allowing clocking adalm-pluto by an external clock source of broad frequency range injecting clock signal into RF trace, for clocking modded LNB supplying LNB with DC voltage…
GeneralSyb/Sagittarius-Headtracker
Project files for the Sagittarius S1 Prototype

festlv/colorlight-usb-phy-adapter
USB3315/7C phy breakout board for colorlight i5 development board
16 parts, built around the SN65DSI83TPAPRQ1 and MIC5504-1.8YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EvanKrall/cm4_ipad_display_adapter repository on GitHub, at the commit this page was made from: the board is cm4_ipad_display_adapter.kicad_pcb and its schematic cm4_ipad_display_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EvanKrall before reusing the design.