
Gbc cm4-aio flex
will-tm/gbc-cm4-aio
This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits.

This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits.
Gbc cm4-aio is an open-source printed circuit board by will-tm, from the will-tm/gbc-cm4-aio repository on GitHub. It is a 4-layer board of 70.1 × 122.2 mm with 130 parts on 200 nets, routed with 1,286 tracks and 745 vias.
It is built around the FAN5333BSX, PAM8302AAYCR and TPS61022RWUR, with the DM3D-SF, MAX17048G+T10 and PCM5102PW among its other parts. Its parts include 42 capacitors, 29 resistors, 13 switches, 10 diodes and 8 ICs. It belongs with the computers and single-board computers boards and the Raspberry Pi (Linux) boards of this library.
This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits. The goal of this project is initially fun and a bit of challenge and besides that the love for the GBC form factor and the will to leverage the wide GBC modding community to create a unique and customizable handheld device.
TBD
TBD
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1K | Resistor_SMD:R_0603_1608Metric | R7, R8, R16, R21, R22, R24, R35, R42 |
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7, C12, C13, C17, C19, C26 |
| 6 | 10nF | Capacitor_SMD:C_0603_1608Metric | C20, C21, C22, C23, C24, C27 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C10, C11, C14, C18, C25 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5, C29, C30, C31, C32 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | -5V0, +5V0, 1V8, 2V8, 3V3 |
| 3 | 0.1uF | PintryParts-Footprints:C_0603_1608Metric | C2, C41, C42 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R10, R11, R12 |
| 3 | 150R | Resistor_SMD:R_0603_1608Metric | R17, R18, R19 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C28, C33, C34 |
| 3 | 865080443007 | Capacitor_SMD:CP_Elec_6.3x5.4 | C4, C39, C40 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D7 |
| 2 | 1.8K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R23, R27 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R25, R34 |
| 2 | 10uF | PintryParts-Footprints:C_0603_1608Metric | C1, C35 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C36, C37 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R32, R33 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 300mR | Capacitor_SMD:C_0805_2012Metric | L1, L2 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R38, R39 |
| 2 | APA2107SECK | LED_SMD:LED_0603_1608Metric | D10, D11 |
| 2 | D_Schottky | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8, D9 |
| 1 | LOGO | ||
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1uH | Inductor_SMD:L_Changjiang_FNR5030S | L4 |
| 1 | 2N7002E | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | 2R | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 6.8uH | Inductor_SMD:L_Changjiang_FNR3015S | L3 |
| 1 | 680K | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 6R8 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | ACT | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | AO4407C | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | AudioJack2_Ground_Switch | gbc_repro_lib:PJ307_jack | J2 |
| 1 | BTN_A | Button_Switch_SMD:SKRMABE010 | SW9 |
| 1 | BTN_B | Button_Switch_SMD:SKRMABE010 | SW8 |
| 1 | BTN_BOTTOM | Button_Switch_SMD:SKRMABE010 | SW5 |
| 1 | BTN_LEFT | Button_Switch_SMD:SKRMABE010 | SW7 |
| 1 | BTN_RIGHT | Button_Switch_SMD:SKRMABE010 | SW6 |
| 1 | BTN_SELECT | Button_Switch_SMD:SKRMABE010 | SW11 |
| 1 | BTN_START | Button_Switch_SMD:SKRMABE010 | SW10 |
| 1 | BTN_UP | Button_Switch_SMD:SKRMABE010 | SW2 |
| 1 | BTN_X | Button_Switch_SMD:SKRMABE010 | SW13 |
| 1 | BTN_Y | Button_Switch_SMD:SKRMABE010 | SW12 |
| 1 | ComputeModule4-CM4 | PintryParts-Footprints:Raspberry-Pi-4-Compute-Module | Module1 |
| 1 | Conn_01x02 | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J7 |
| 1 | Conn_01x11 | gbc_repro_lib:gbc_buttons | J6 |
| 1 | Conn_01x40 | Connector_FFC-FPC:Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J1 |
| 1 | DM3D-SF | Connector_Card:microSD_HC_Hirose_DM3D-SF | J4 |
| 1 | D_Schottky | Diode_SMD:D_1206_3216Metric | D1 |
| 1 | FAN5333B | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | MAX17048G | Package_DFN_QFN:TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm | U4 |
| 1 | MCP73871-2CAI_ML | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U9 |
| 1 | PAM8302AAY | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U6 |
| 1 | PCM5102 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | RX | TestPoint:TestPoint_Pad_D1.0mm | RX1 |
| 1 | SCL | TestPoint:TestPoint_Pad_D1.0mm | SCL1 |
| 1 | SDA | TestPoint:TestPoint_Pad_D1.0mm | SDA1 |
| 1 | SGM2019-2.8YN5G/TR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | SGM3204YN6G/TR | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U7 |
| 1 | SW_Push | Button_Switch_SMD:SW_SP3T_PCM13 | SW1 |
| 1 | SW_Push_Dual_x2 | Button_Switch_SMD:SLLB510100 | SW3 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW4 |
| 1 | TPS61022RWUR | Package_DFN_QFN:CONV_TPS61022RWUR | U10 |
| 1 | TX | TestPoint:TestPoint_Pad_D1.0mm | TX1 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | SPK-1 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | SPK+1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D1.0mm | VBAT1 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D1.0mm | VBUS1 |
| 1 | VIN | TestPoint:TestPoint_Pad_D1.0mm | VIN1 |
| 1 | ~ | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C38 |

will-tm/gbc-cm4-aio
This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits.

will-tm/gbc-cm4-aio
This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits.



SantiBarrios2002/mtp-f26-teamc
MTP F26 (UPC) Team C workspace: radio link budget, RFM69 firmware, protocol simulator


kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.

tmtrcreations/The_Ark
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.

nrdsp/rvPhone
The goal of the this project is to develop a privacy enhanced, simple and fully featured mobile phone.

It measures 70.1 × 122.2 mm and has 4 copper layers, 1.59 mm thick.
130 parts, built around the FAN5333BSX, PAM8302AAYCR, TPS61022RWUR and DM3D-SF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the will-tm/gbc-cm4-aio repository on GitHub, at the commit this page was made from: the board is PCBs/mainboard/gbc-cm4-aio.kicad_pcb and its schematic PCBs/ls029b3sx02-adapter/gbc-cm4-aio-flex.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask will-tm before reusing the design.