Skip to the content
4 layers118 × 117 mmCm4-robot, the printed circuit board in 3D

PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

Size
118 × 117 mm
Copper layers
4
Thickness
1.61 mm
Parts
268
Nets
370
Pads
1,371
Tracks, vias
4,173, 552
Pours
13
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
31 Jan 2021
Updated
3 Aug 2024

Overview

Cm4-robot is an open-source printed circuit board by Twisted-Fields, from the Twisted-Fields/acorn-robot-electronics repository on GitHub. It is a 4-layer board of 118 × 117 mm with 268 parts on 370 nets, routed with 4,173 tracks and 552 vias.

It is built around the U74LVC1G125G-AL5-R, CA-IS3050G and ADS1115IDGSR, with the MSUSB30, MCP2515T-I/SO-HX and SC16IS752IPW among its other parts. Its parts include 64 resistors, 54 capacitors, 26 ICs, 24 diodes and 14 connectors. It belongs with the robots and motor control and computers and single-board computers boards of this library.

Main components

12

README

cm4_robot_board/README.md

Acorn Raspberry Pi Motherboard

About

This is the motherboard design used on Acorn, the precision farming rover from Twisted Fields.

This board provides motor control communication to four Odrive motor controllers via RS-485, e-stop control, motor power control, and more.

For more information please see http://community.twistedfields.com

Parts

268
QtyValueFootprintReferences
200.1uF 50VCapacitor_SMD:C_0603_1608MetricC11, C12, C13, C14, C15, C16, C25, C26, C30, C31, C36, C37, C41, C47, C49, C50 +4
1910KResistor_SMD:R_0603_1608MetricR5, R6, R12, R14, R18, R20, R23, R28, R29, R30, R33, R47, R48, R49, R58, R61 +3
12SN74LVC1G07QDCKTQ1Package_TO_SOT_SMD:SOT-353_SC-70-5U1, U2, U15, U18, U19, U22, U27, U29, U30, U34, U35, U36
12SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13, JP14, JP15
7WS2812Bparts:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD5, D6, D7, D18, D19, D20, D21
62.2k 1%Resistor_SMD:R_0603_1608MetricR4, R9, R11, R32, R56, R57
5130RResistor_SMD:R_0603_1608MetricR27, R45, R46, R59, R60
522pF 50VCapacitor_SMD:C_0603_1608MetricC19, C21, C22, C23, C24
5Conn_01x04Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_VerticalJ4, J5, J6, J10, J12
5Q_NMOS_GSDPackage_TO_SOT_SMD:SOT-23Q2, Q3, Q4, Q5, Q10
4100RResistor_SMD:R_0603_1608MetricR22, R24, R25, R26
410uF 25VCapacitor_SMD:C_0805_2012MetricC2, C3, C17, C48
418pF 50VCapacitor_SMD:C_0603_1608MetricC4, C7, C8, C10
41kResistor_SMD:R_0603_1608MetricR1, R10, R19, R21
422nF 100vCapacitor_SMD:C_0603_1608MetricC42, C44, C45, C46
45.1kResistor_SMD:R_0603_1608MetricR7, R8, R51, R52
475R 100vResistor_SMD:R_0603_1608MetricR41, R42, R43, R44
4LED_REDLED_SMD:LED_0805_2012MetricD2, D8, D28, D29
4MountingHoleMountingHole:MountingHole_3.7mmH1, H2, H3, H4
4SW_SPDTparts:CS12ANW03SW2, SW3, SW4, SW5
4TestPointTestPoint:TestPoint_Pad_D2.0mmTP4, TP5, TP6, TP7
31uF 50VCapacitor_SMD:C_0603_1608MetricC32, C51, C52
327RResistor_SMD:R_0603_1608MetricR13, R38, R39
347uF 63V solidCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1, C27, C28
3LED_GREENLED_SMD:LED_0805_2012MetricD4, D12, D14
3LED_YELLOWLED_SMD:LED_0805_2012MetricD1, D17, D23
3SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP2, JP3, JP4
20.1uF 100VCapacitor_SMD:C_0805_2012MetricC35, C39
2120RResistor_SMD:R_0603_1608MetricR34, R35
214.7456MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY3, Y4
216MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1, Y2
2470RResistor_SMD:R_0603_1608MetricR2, R3
247uF 16V Capacitor_SMD:C_1210_3225MetricC33, C38
250k 0.1%Resistor_SMD:R_0603_1608MetricR53, R54
2ABS2Diode_SMD:Diode_Bridge_Diotec_ABSD13, D22
2AO3401APackage_TO_SOT_SMD:SOT-23Q6, Q9
2CDSOT23-SM712digikey-footprints:SOT-23-3D9, D10
2Conn_01x01parts:DF40C-100DS-0.4V51J23, J24
2Conn_01x03Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_VerticalJ11, J21
2ISL54222AIUZparts:ISL54222AIUZU5, U24
2LOGOtaylor_footprints:twistedG***, G***
2LOGOtaylor_footprints:twisted_2G***, G***
2LOGOtaylor_footprints:twisted_iconG***, G***
2MCP2515-xSOPackage_SO:SOIC-18W_7.5x11.6mm_P1.27mmU8, U9
2PolyfuseFuse:Fuse_1206_3216MetricF1, F2
2SC16IS752Package_SO:TSSOP-28_4.4x9.7mm_P0.65mmU13, U14
2TPD4E1U06DCKRPackage_TO_SOT_SMD:SOT-363_SC-70-6U4, U23
2TestPointTestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_BeadedTP2, TP3
2USBLC6-2P6Package_TO_SOT_SMD:SOT-666U25, U26
2isolatorPackage_SO:SOIC-8_7.5x5.85mm_P1.27mmU10, U11
2~parts:Ckmtw-W-2510S06P_1x06_P2.54mm_VerticalJ16, J17
10.1uF 50VCapacitor_SMD:C_0805_2012MetricC40
11.8MResistor_SMD:R_0603_1608MetricR17
11000uF 10v solidCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC5
1100kResistor_SMD:R_0603_1608MetricR50
1100uHparts:L_15mmx15mmL1
110uHInductor_SMD:L_1210_3225MetricL2
115V / 200mWDiode_SMD:D_SOD-323D25
11747981-1parts:TE_1747981-1J1
11N4148WSDiode_SMD:D_SOD-323D27
11nF 2kVCapacitor_SMD:C_1206_3216MetricC43
11uF 25VCapacitor_SMD:C_0603_1608MetricC20
1200RResistor_SMD:R_0603_1608MetricR31
1205kResistor_SMD:R_0603_1608MetricR16
1249kResistor_SMD:R_0805_2012MetricR37
124kResistor_SMD:R_0805_2012MetricR36
128V / 500mWDiode_SMD:D_SOD-123D24
14.7uF 100VCapacitor_SMD:C_1210_3225MetricC34
14.7uF 25VCapacitor_SMD:C_0603_1608MetricC18
1470uF 10VCapacitor_SMD:CP_Elec_6.3x7.7C29
15.1k 0.1%Resistor_SMD:R_0603_1608MetricR55
151kResistor_SMD:R_0805_2012MetricR40
156RResistor_SMD:R_0603_1608MetricR15
1ADS1115IDGSPackage_SO:TSSOP-10_3x3mm_P0.5mmU33
1AO3400APackage_TO_SOT_SMD:SOT-23Q7
1B3U-1000Pparts:SW_TS_1101_C_WSW1
1CAN Interface Aparts:M12A-08PFFRJ2
1CAN Interface Bparts:M12A-08PFFRJ13
1CC56-12SEKWADisplay_7Segment:CA56-12SEKWAU16
1CONFIG_SWButton_Switch_SMD:SW_DIP_SPSTx04_Slide_KingTek_DSHP04TS_W7.62mm_P1.27mmSW7

The 235 most common of 268 parts.

More from Twisted-Fields/acorn-robot-electronics

7
  • 2 layers127.5 × 95 mmAcorn motherboard, the printed circuit board in 3D

    Acorn motherboard

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    217 parts81
  • 4 layers109 × 155.5 mmSupercap, the printed circuit board in 3D

    Supercap

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    198 parts81
  • 4 layers62 × 65.5 mmSoft start, the printed circuit board in 3D

    Soft start

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    65 parts81
  • 4 layers80 × 156 mmSupercap simple, the printed circuit board in 3D

    Supercap simple

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    56 parts81
  • 2 layers210 × 60 mmSupercap (copy), the printed circuit board in 3D

    Supercap (copy)

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    48 parts81
  • 2 layers106.5 × 43.5 mmGps adapter, the printed circuit board in 3D

    Gps adapter

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    12 parts81
  • 2 layers36 × 22 mmMag sensor, the printed circuit board in 3D

    Mag sensor

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    9 parts81

Similar boards

  • 4 layers60 × 75 mmMixed Signal Demo PCB, the printed circuit board in 3D

    Mixed Signal Demo PCB

    rcardenes/FEDEVEL-Mixed-Signal-PCB

    KiCAD files for the Mixed-Signal Hardware Design course at Fedevel, by Phil Salmony

    114 parts2
  • 4 layers40.3 × 68.8 mmNrfMain, the printed circuit board in 3D

    NrfMain

    batkay/CapstonePCB

    76 parts
  • 6 layers133 × 102 mmIasis, the printed circuit board in 3D

    Iasis

    hydazz/iasis

    An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

    723 partsApache-2.0
  • 6 layers92.6 × 69.4 mmUsb hub 2, the printed circuit board in 3D

    Usb hub 2

    yedidia-sisay/usb3-multiport-hub

    An open-source USB 3.2 Gen 2 (10 Gbps) multiport hub & docking station.

    230 parts
  • 4 layers40 × 40 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    benwys/SparrowHawk

    Open source flight controller for FPV drones. Includes two complete hardware designs (kicad) with production files. Will include custom firmware (bare-metal cpp). In progress :-)

    89 partsMIT
  • 2 layers70 × 100 mmEKCP LLP, the printed circuit board in 3D

    EKCP LLP

    Konstantin-Dudersky/plc-modules

    После открыть файл в Inkscape и изменить размер страницы

    58 parts
  • 6 layers84.5 × 72.2 mmHub standard rev2, the printed circuit board in 3D

    Hub standard rev2

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    117 partsApache-2.0
  • 2 layers97 × 97 mmVanPom, the printed circuit board in 3D

    VanPom

    hl037/VanPom

    Power management PCB for vans + firmware

    162 parts

Questions

How big is the Cm4-robot PCB?

It measures 118 × 117 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Cm4-robot use?

268 parts, built around the U74LVC1G125G-AL5-R, CA-IS3050G, ADS1115IDGSR and MSUSB30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cm4-robot KiCad files?

From the Twisted-Fields/acorn-robot-electronics repository on GitHub, at the commit this page was made from: the board is cm4_robot_board/cm4-robot.kicad_pcb and its schematic cm4_robot_board/cm4-robot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cm4-robot design in my own project?

Its repository states no licence, so its author keeps all rights: ask Twisted-Fields before reusing the design.