

Mixed Signal Demo PCB
KiCAD files for the Mixed-Signal Hardware Design course at Fedevel, by Phil Salmony
- Size
- 60 × 75 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 114
- Nets
- 94
- Pads
- 345
- Tracks, vias
- 689, 338
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Jul 2024
- Updated
- 4 Aug 2024
Overview
Mixed Signal Demo PCB is an open-source printed circuit board by rcardenes, from the rcardenes/FEDEVEL-Mixed-Signal-PCB repository on GitHub. It is a 4-layer board of 60 × 75 mm with 114 parts on 94 nets, routed with 689 tracks and 338 vias.
It is built around the STM32F103CBT6, MCP6001-E/OT and ADC141S626CIMM/NOPB, with the DAC7563TDGS, TLV62568DBV and HT7533-1 among its other parts. Its parts include 45 capacitors, 36 resistors, 11 ICs, 9 diodes and 4 connectors. It belongs with the STM32 boards of this library.
Main components
12STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MCP6001-E/OT
SOT-23-5-40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierADC141S626CIMM/NOPB
VSSOP-10-0.5mm-40℃~+85℃ 0.95LSB 1 14 2.7V~5.5V 3uA 50kHz、250kHz 82dB 900kHz~4.5MHz External SAR SPI Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)DAC7563TDGS
VSSOP-10-0.5mm-40℃~+125℃ 0.25LSB 12 2 2.7V~5.5V 550nA 7us Integrated buffer、Power-on reset、Power-down mode、Bipolar output、Programmable gain、Built-in reference source SPI Voltage Buffer VSSOP-10-0.5mm Digital to Analog Converters (DAC) ROHSTexas InstrumentsDigital To Analog Converters (DACs)TLV62568DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 1A 2.5V~5.5V 35uA 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersHT7533-1
SOT-23-5-40℃~+85℃@(Ta) 1 100mA 2.5uA 25mV@(1mA) 3.3V 30V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsREF3033AIDBZT
SOT-23-3-40℃~+125℃ 105uVrms 25mA 3.35V~5.5V 3.3V 36uVp-p 42uA 75ppm/℃ Fixed Series ±0.2% SOT-23-3 Voltage Reference ROHSTexas InstrumentsVoltage ReferenceUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)CL05B104KO5NNN
0402100nF 16V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT0402WGF1001
0402-55℃~+155℃ 1kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface MountCL10A106KP8NNN
060310V 10uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTPESD3V3L1BA
--65℃~+150℃ 1 101pF 18A@8/20us 26V 3.3V 500W 6.9V 90nA Bidirectional ESD SOD-323 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
README
README.mdMixed-Signal Demo PCB
Demo board project for the "Mixed-Signal Hardware Design with KiCAD" course, by Phil Salmony (of Phil's Lab fame) at FEDEVEL.
The project was created from scratch using KiCAD 8.0, following the course lectures. It comes with all the relevant files, including missing footprints and 3D models. Several of the 3D models were downloaded, and are not to be used without permission:
- HRO_TYPE-C-31-M-12.step (USB receptacle, from GrabCad.com)
- 31-5640-1010.stp (BNC connectors, from Amphenol.com)
- L_Coilcraft_XxL4020.step (for the matching inductor, from 3DContentCentral.com)
The models for the CMF3216 common-mode choke, and the RGB LED (E6C...) were created by myself in FreeCAD and are free to use, with appropriate acknowledgment.
The project includes Gerber files, and BOM/Placement files. All relevant parts include an MNP field with JCLPCB/LCSC part numbers, and the assembly files were generated using the "Fabrication Toolkit" plugin, which generates JLCPCB-compatible output.
Parts
114| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric | C201, C302, C303, C304, C305, C311, C312, C313, C402, C403, C404, C410, C411, C416, C503, C504 |
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R202, R203, R205, R308, R310, R313, R402, R406, R408 |
| 7 | 10u | Capacitor_SMD:C_0603_1608Metric | C301, C409, C412, C413, C414, C415, C502 |
| 7 | PESD3V3L1BA,115 | Diode_SMD:D_SOD-323 | D302, D303, D304, D305, D306, D401, D501 |
| 6 | 49R9 | Resistor_SMD:R_0402_1005Metric | R309, R311, R312, R314, R409, R504 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C202, C203, C307, C308, C507 |
| 5 | 22u | Capacitor_SMD:C_0805_2012Metric | C204, C205, C206, C207, C208 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R301, R302, R307, R506 |
| 4 | 150p | Capacitor_SMD:C_0402_1005Metric | C405, C407, C408, C506 |
| 4 | 1n | Capacitor_SMD:C_0402_1005Metric | C401, C406, C501, C505 |
| 4 | MCP6001T-E/OT | Package_TO_SOT_SMD:SOT-23-5 | U202, U401, U402, U501 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H101, H102, H103, H104 |
| 3 | 0R | Resistor_SMD:R_0402_1005Metric | R305, R410, R505 |
| 3 | 22k | Resistor_SMD:R_0402_1005Metric | R206, R404, R502 |
| 2 | 10n | Inductor_SMD:L_0402_1005Metric | L201, L301 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C309, C310 |
| 2 | 12k | Resistor_SMD:R_0402_1005Metric | R405, R503 |
| 2 | 2M2 | Resistor_SMD:R_0402_1005Metric | R401, R407 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R303, R304 |
| 2 | 6k8 | Resistor_SMD:R_0603_1608Metric | R403, R501 |
| 2 | DOSIN-801-0031 | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J401, J501 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R204 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric | R201 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C306 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y301 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R306 |
| 1 | 2x5x1.27mm | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J302 |
| 1 | 68u | Inductor_SMD:L_Coilcraft_XxL4020 | L202 |
| 1 | ADC141S626CIMM_NOPB | Package_SO:VSSOP-10_3x3mm_P0.5mm | U403 |
| 1 | CMF3216F-900-2P-T | Missing_Footprints:CMF3216F | FL301 |
| 1 | DAC7563TDGSR | Package_SO:VSSOP-10_3x3mm_P0.5mm | U502 |
| 1 | DNP | Capacitor_SMD:C_0402_1005Metric | C209 |
| 1 | HT7533-1 | Package_TO_SOT_SMD:SOT-89-3 | U201 |
| 1 | LED_RGB_E6C1206RGBC3UDA | Missing_Footprints:E6C1206RGBC3UDA | D301 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D201 |
| 1 | REF3033A/DBZT | Package_TO_SOT_SMD:SOT-23 | U404 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U301 |
| 1 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U203 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U302 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J301 |
Similar boards
- 4 layers65 × 75 mm

- 4 layers33.5 × 66.8 mm

Net bmp
elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)
97 parts3GPL-3.0 - 4 layers97.1 × 26 mm

- 4 layers118 × 117 mm

Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 4 layers68.6 × 88.9 mm

- 4 layers60 × 51 mm

- 2 layers55 × 80 mm

MixedSignalKicad
republicofmakers/HW-KICAD-MCU-STM32-External-ADC-DAC
Mixed Signal Hardware Design with Kicad
125 parts1MIT - 4 layers60.6 × 56.2 mm

Furnace controller
digiexchris/furnace-controller
Simple 5 wire furnace controller using the Wemos D1 Mini. Intended for ESPHome and Home Assistant or other automation uses.
40 parts
Questions
How big is the Mixed Signal Demo PCB PCB?
It measures 60 × 75 mm and has 4 copper layers, 1.59 mm thick.
What parts does the Mixed Signal Demo PCB use?
114 parts, built around the STM32F103CBT6, MCP6001-E/OT, ADC141S626CIMM/NOPB and DAC7563TDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mixed Signal Demo PCB KiCad files?
From the rcardenes/FEDEVEL-Mixed-Signal-PCB repository on GitHub, at the commit this page was made from: the board is Mixed-Signal_Demo_PCB.kicad_pcb and its schematic Mixed-Signal_Demo_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mixed Signal Demo PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask rcardenes before reusing the design.