
Mixed Signal Demo PCB
rcardenes/FEDEVEL-Mixed-Signal-PCB
KiCAD files for the Mixed-Signal Hardware Design course at Fedevel, by Phil Salmony

Mixed signal audio board using the rp2040
Rp2040 audioboard is an open-source printed circuit board by lzptr, from the lzptr/rp2040_audioboard repository on GitHub, published under the MIT licence. It is a 4-layer board of 65 × 75 mm with 124 parts on 99 nets, routed with 692 tracks and 206 vias.
It is built around the RP2040, TLV9001IDBV and ADC141S626CIMM/NOPB, with the DAC7562SDGS, TLV62569DBV and W25Q128JVSIQ among its other parts. Its parts include 49 capacitors, 36 resistors, 12 ICs, 9 diodes and 4 connectors. It belongs with the RP2040 boards of this library.
Mixed signal audio board using the rp2040:

For an interactive KiCad experience see: RP2040 Audioboard.
This project is a variation of the board from phils lab mixed signal course (https://www.phils-lab.net/courses). It's purpose is to serve as a general input/output signal analyzer/generator for audio projects.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100n | Capacitor_SMD:C_0402_1005Metric | C109, C203, C204, C207, C208, C209, C210, C211, C212, C213, C214, C215, C217, C304, C307, C308 +5 |
| 11 | 1k | Resistor_SMD:R_0402_1005Metric | R104, R105, R106, R107, R203, R209, R210, R211, R302, R309, R310 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C301, C302, C305, C306, C312, C401 |
| 6 | PESD3V3L1BA | Diode_SMD:D_SOD-323 | D201, D202, D203, D204, D301, D401 |
| 5 | 22u | Capacitor_SMD:C_0805_2012Metric | C103, C104, C106, C107, C108 |
| 4 | 150p | Capacitor_SMD:C_0402_1005Metric | C303, C314, C316, C406 |
| 4 | 1n | Capacitor_SMD:C_0402_1005Metric | C311, C313, C404, C405 |
| 4 | 49R9 | Resistor_SMD:R_0402_1005Metric | R204, R205, R206, R406 |
| 4 | GND | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | TLV9001IDBVR | Package_TO_SOT_SMD:SOT-23-5 | U103, U302, U304, U402 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C101, C102, C403 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C205, C206, C216 |
| 2 | 031-5640-1010 | lzptr:AMPHENOL-BNC-031-5640-1010 | J301, J401 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R306, R401 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R213, R402 |
| 2 | 12k | Resistor_SMD:R_0402_1005Metric | R308, R405 |
| 2 | 22k | Resistor_SMD:R_0402_1005Metric | R307, R404 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R201, R202 |
| 2 | 2M2 | Resistor_SMD:R_0402_1005Metric | R303, R304 |
| 2 | 30pF | Capacitor_SMD:C_0402_1005Metric | C201, C202 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R207, R208 |
| 2 | 6k8 | Resistor_SMD:R_0402_1005Metric | R305, R403 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R103 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric | R101 |
| 1 | 10n | Inductor_SMD:L_0402_1005Metric | L101 |
| 1 | 2x5 1.27mm | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J201 |
| 1 | 3.3V | LED_SMD:LED_0603_1608Metric | D101 |
| 1 | 3.3V | TestPoint:TestPoint_Pad_D1.0mm | TP103 |
| 1 | 3.3VA | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | 3.3VA | TestPoint:TestPoint_Pad_D1.0mm | TP104 |
| 1 | 464k | Resistor_SMD:R_0402_1005Metric | R102 |
| 1 | 49R9 | Resistor_SMD:R_0805_2012Metric | R301 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.0mm | TP102 |
| 1 | 68u | lzptr:MWSA0603S | L102 |
| 1 | ADC141S626CIMM_NOPB | lzptr:VSSOP-10 | U303 |
| 1 | Act | LED_SMD:LED_0603_1608Metric | D205 |
| 1 | BOOTSEL | lzptr:SW_TL3365AF180QG | SW202 |
| 1 | CMF3216F-900-2P-T | lzptr:CMC-1206 | L201 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y201 |
| 1 | DAC7562SDGSR | lzptr:VSSOP-10 | U401 |
| 1 | DNP | Capacitor_SMD:C_0402_1005Metric | C105 |
| 1 | DNP 10k | Resistor_SMD:R_0402_1005Metric | R212 |
| 1 | HT7533-1 | Package_TO_SOT_SMD:SOT-89-3 | U102 |
| 1 | REF3033AIDBZT | Package_TO_SOT_SMD:SOT-23 | U301 |
| 1 | RESET | lzptr:SW_TL3365AF180QG | SW201 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U201 |
| 1 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U101 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U202 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J202 |
| 1 | VCOM | TestPoint:TestPoint_Pad_D1.0mm | TP105 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U203 |

rcardenes/FEDEVEL-Mixed-Signal-PCB
KiCAD files for the Mixed-Signal Hardware Design course at Fedevel, by Phil Salmony

elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)



cepetr/blue2joy
Bluetooth HID adapter for Atari 8-bit computers: use modern BLE gamepads or mice to emulate the Atari joystick and paddles.

digiexchris/furnace-controller
Simple 5 wire furnace controller using the Wemos D1 Mini. Intended for ESPHome and Home Assistant or other automation uses.


ducman1998/basket-ball-robot
DeltaX Basketball Track robot (University of Tartu) | Source code, robot design and electronic schematics |🥉Won 3rd place out of 10 teams | The fastest robot in the competition
It measures 65 × 75 mm and has 4 copper layers, 1.61 mm thick.
124 parts, built around the RP2040, TLV9001IDBV, ADC141S626CIMM/NOPB and DAC7562SDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lzptr/rp2040_audioboard repository on GitHub, at the commit this page was made from: the board is hardware/rp2040_audioboard.kicad_pcb and its schematic hardware/adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).