

Picr 1 9tdi
DeltaX Basketball Track robot (University of Tartu) | Source code, robot design and electronic schematics |🥉Won 3rd place out of 10 teams | The fastest robot in the competition
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 82
- Pads
- 361
- Tracks, vias
- 558, 315
- Pours
- 109
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Feb 2026
- Updated
- 2 Jun 2026
Overview
Picr 1 9tdi is an open-source printed circuit board by ducman1998, from the ducman1998/basket-ball-robot repository on GitHub. It is a 4-layer board of 50 × 50 mm with 84 parts on 82 nets, routed with 558 tracks and 315 vias.
It is built around the STM32G441KBT6, DRV8243HQDGQRQ1 and MAX12930EASA+, with the TPS62933DRL, SI8640AB-B-IS1 and 20021121-00010T4LF among its other parts. Its parts include 37 capacitors, 20 resistors, 15 ICs, 9 connectors and 1 diode. It belongs with the STM32 boards of this library.
Main components
11STM32G441KBT6
LQFP-32(7x7)1.71V~3.6V 128KB 12bit 12bit 150MHz 26 ARM Cortex-M4 FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)DRV8243HQDGQRQ1
HVSSOP-28-40℃~+125℃ 98mΩ Interleaved conduction protection、Current sensing/regulation function、Soft switching Yes HVSSOP-28 Brushed DC Motor Drivers ROHSTexas InstrumentsMotor Driver ICsMAX12930EASA+
SOIC-8-40℃~+125℃ 0 1.71V~5.5V 1.71V~5.5V 2 2 24.4ns 25Mbps 3000 50kV/us Fail-safe output、Multi-voltage domain interface Low Level SOIC-8 Digital Isolators ROHSMaxim Integrated (Analog Devices)Digital IsolatorsTPS62933DRL
SOT-583-40℃~+150℃@(TJ) 1 12uA 2.2MHz 3.8V~30V 3A 800mV~22V Adjustable Buck Buck Built-in Yes SOT-583 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSI8640AB-B-IS1
SOIC-16-40℃~+125℃ 0 1Mbps 2500 4 4 50kV/us Low Level Power-on reset SOIC-16 Digital Isolators ROHSSkyworks SolutionsDigital Isolators20021121-00010T4LF
SMD,P=1.27mm-55℃~+125℃ 1.1mm 1.27mm 1.27mm 10P 125V 1A 2 2x5P 3mm Black Copper alloy Pin Header Surface Mount,Vertical Tin SMD,P=1.27mm Pin Headers ROHSAmphenolPin HeadersCM1223-02SO
SOT-23-5-40℃~+85℃ 100nA 1A@8/20us 1pF 2 3.3V 6V 8.8V ESD IEC 61000-4-2 Unidirectional SOT-23-5 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators10118193-0001LF
SMD-55℃~+85℃ 1 1.8A 100V 5P Black Female Micro-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB ConnectorsBUK6Y10-30PX
LFPAK-56-55℃~+175℃ 1 P-Channel 10mΩ@10V 110W 2.36nF 270pF 30V 3V 470pF 64nC@10V 80A P-Channel LFPAK-56 MOSFETs ROHSNexperiaMOSFETsRF-WUB190DS-DD-E2
0603140° 20mA 3.25V 875mcd White 0603 LED Indication - Discrete ROHSRefondLED Indication - Discrete
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C10, C19, C20, C22, C24, C25, C27, C30, C31, C32, C33, C34, C35, C36, C37 +3 |
| 14 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C13, C14, C15, C17, C21, C23, C26, C28, C29 |
| 8 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R8, R11, R15, R17, R19, R20 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R9, R14 |
| 3 | 215079-4 | Library:TE_Micro-MaTch_215079-4_2x02_P1.27mm_Vertical | U9, U10, U11 |
| 3 | 22K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R10, R16 |
| 3 | 2K7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R13, R18 |
| 3 | Conn_01x02_Socket | Library:SolderWirePad_1x02_SMD_3x4mm | J7, J8, J9 |
| 3 | DRV8243HQDGQRQ1 | Library:VSSOP_SDGQQ1_TEX-L | U1, U4, U6 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C18 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J6 |
| 2 | SI8640AB-B-IS1 | Library:SI8640AB-B-IS1 | U12, U13 |
| 1 | 1.5u | Library:SRP4021HMCT-1R5M_custom | L1 |
| 1 | 10118193-0001LF | Library:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J1 |
| 1 | 20021121-00010T4LF | Library:HDR-SMD_10P-P1.27-V-M-R2-C5-S1.27-LS5.5 | U8 |
| 1 | 20R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 52K3 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | BUK6Y10-30PX | Library:BUK6Y10-30PX | Q1 |
| 1 | CM1223-02SO | Library:SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | U2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x02_Socket | Library:SolderWirePad_1x02_SMD_3x4mm_power | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | MAX12930EASA+ | Library:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U14 |
| 1 | MIC5504-3.3YM5 | Library:SOT-23-5 | U5 |
| 1 | RF-WUB190DS-DD | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | STM32G441KBT6 | Library:LQFP-32_7x7mm_P0.8mm | U7 |
| 1 | TPS62933 | Package_TO_SOT_SMD:SOT-583-8 | U3 |
| 1 | ~ | Library:TE_Micro-MaTch_215079-4_2x02_P1.27mm_Vertical | U15 |
Similar boards
- 2 layers49.5 × 32.1 mm

- 2 layers62.8 × 30.3 mm

- 4 layers65 × 75 mm

- 2 layers53.6 × 53.3 mm

- 2 layers139 × 190 mm

Programmable precision resistor
sbstnh/programmable_precision_resistor
A SCPI programmable precision resistor
253 parts65BSD-3-Clause - 2 layers48.7 × 22.5 mm

Airsticks pcb
lizboyer/Airsticks
Airsticks was a project by myself (Elizabeth Boyer), Christian Tchilikov, and Dearborn Plys. It uses accelerometers, a speaker, an STM32 MCU, and a board we created.
69 parts1 - 2 layers64.7 × 35.3 mm

Stm32g441kbt6 development
jalikins/STM32_bazel_development
This repository contains a hermetic Bazel build configuration for STM32 microcontrollers (specifically targeting the STM32G4 series).
57 partsMIT - 4 layers75 × 25 mm

Questions
How big is the Picr 1 9tdi PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Picr 1 9tdi use?
84 parts, built around the STM32G441KBT6, DRV8243HQDGQRQ1, MAX12930EASA+ and TPS62933DRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Picr 1 9tdi KiCad files?
From the ducman1998/basket-ball-robot repository on GitHub, at the commit this page was made from: the board is electronics/picr_1_9tdi.kicad_pcb and its schematic electronics/picr_1_9tdi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Picr 1 9tdi design in my own project?
Its repository states no licence, so its author keeps all rights: ask ducman1998 before reusing the design.