Skip to the content
2 layers49.5 × 32.1 mmJlink edu mini adapter, the printed circuit board in 3D

Jlink edu mini adapter

dani9875/jlink_edu_mini_adapter
Size
49.5 × 32.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
22
Pads
44
Tracks, vias
56, 6
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
28 Jul 2024
Updated
13 Mar 2025

Overview

Jlink edu mini adapter is an open-source printed circuit board by dani9875, from the dani9875/jlink_edu_mini_adapter repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 49.5 × 32.1 mm with 7 parts on 22 nets, routed with 56 tracks and 6 vias.

It is built around the 20021121-00010T4LF. Its parts include 3 connectors and 2 resistors. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

Jlink edu mini adapter

How to

Coming soon...

Release notes

Version: v1.0

Changelog:

  • Initial version to convert 1.27 mm 2x5P JLINK EDU MINI IDC to 2.54 mm 2x5P (to plug of nails connector end) with VBUS support

Parts

7
QtyValueFootprintReferences
2,
20805W8F5101T5Epepy_sym_lib:[RES_SMD_0805_2012Metric]R1, R2
120021121-00010T4LFpepy_sym_lib:[10P_2X5_IDC_1_27MM_MALE]Amphenol ICC 20021121-00010T4LFJ1
15103308-1pepy_sym_lib:[10P_2X5_IDC_MALE]TE Connectivity 5103308-1J3
1TYPE-C 16PIN 2MD(073)pepy_sym_lib:[USB_C_16P_RA_FEMALE]SHOU HAN TYPE-C 16PIN 2MD(073)J2

Similar boards

  • 4 layers50 × 50 mmPicr 1 9tdi, the printed circuit board in 3D

    Picr 1 9tdi

    ducman1998/basket-ball-robot

    DeltaX Basketball Track robot (University of Tartu) | Source code, robot design and electronic schematics |🥉Won 3rd place out of 10 teams | The fastest robot in the competition

    84 parts1
  • 4 layers65 × 75 mmRp2040 audioboard, the printed circuit board in 3D

    Rp2040 audioboard

    lzptr/rp2040_audioboard

    Mixed signal audio board using the rp2040

    124 partsMIT
  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k

Questions

How big is the Jlink edu mini adapter PCB?

It measures 49.5 × 32.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Jlink edu mini adapter use?

7 parts, built around the 20021121-00010T4LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Jlink edu mini adapter KiCad files?

From the dani9875/jlink_edu_mini_adapter repository on GitHub, at the commit this page was made from: the board is jlink_edu_mini_adapter.kicad_pcb and its schematic jlink_edu_mini_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Jlink edu mini adapter design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).