
Programmable precision resistor
sbstnh/programmable_precision_resistor
A SCPI programmable precision resistor
STMicroelectronicsExtended
1.71V~3.6V 128KB 12bit 12bit 150MHz 26 ARM Cortex-M4 FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS
The STM32G441KBT6 is a microcontroller made by STMicroelectronics in a LQFP-32(7x7) package with 32 pins. 1.71V~3.6V 128KB 12bit 12bit 150MHz 26 ARM Cortex-M4 FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32G4:STM32G441KBTx, from KiCad's library) and its footprint (Package_QFP:LQFP-32_7x7mm_P0.8mm, from KiCad's library), ready for a KiCad board. 8 are in stock at JLCPCB (part C730107). 8 open-source boards in 8 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VDD | Power in |
| 2 | PF0 | Input/output |
| 3 | PF1 | Input/output |
| 4 | PG10 | Input/output |
| 5 | PA0 | Input/output |
| 6 | PA1 | Input/output |
| 7 | PA2 | Input/output |
| 8 | PA3 | Input/output |
| 9 | PA4 | Input/output |
| 10 | PA5 | Input/output |
| 11 | PA6 | Input/output |
| 12 | PA7 | Input/output |
| 13 | PB0 | Input/output |
| 14 | VSSA | Power in |
| 15 | VDDA | Power in |
| 16 | VSS | Power in |
| 17 | VDD | Power in |
| 18 | PA8 | Input/output |
| 19 | PA9 | Input/output |
| 20 | PA10 | Input/output |
| 21 | PA11 | Input/output |
| 22 | PA12 | Input/output |
| 23 | PA13 | Input/output |
| 24 | PA14 | Input/output |
| 25 | PA15 | Input/output |
| 26 | PB3 | Input/output |
| 27 | PB4 | Input/output |
| 28 | PB5 | Input/output |
| 29 | PB6 | Input/output |
| 30 | PB7 | Input/output |
| 31 | PB8 | Input/output |
| 32 | VSS | Passive |

sbstnh/programmable_precision_resistor
A SCPI programmable precision resistor

ducman1998/basket-ball-robot
DeltaX Basketball Track robot (University of Tartu) | Source code, robot design and electronic schematics |🥉Won 3rd place out of 10 teams | The fastest robot in the competition

lizboyer/Airsticks
Airsticks was a project by myself (Elizabeth Boyer), Christian Tchilikov, and Dearborn Plys. It uses accelerometers, a speaker, an STM32 MCU, and a board we created.

jalikins/STM32_bazel_development
This repository contains a hermetic Bazel build configuration for STM32 microcontrollers (specifically targeting the STM32G4 series).


Reemuson/MENG4210-Project
Data Recording and Electrophysiological Acquisition Module


va-cyber-zha/VETO_BOX_V0.0.1
Cosmic veto box - Scintillator box with SIPMs measuring cosmic radiation. Inside the box will be placed test subject, and with the PCB I designed, filter out the cosmic noise from a measurement.
Yes. The symbol is MCU_ST_STM32G4:STM32G441KBTx and the footprint Package_QFP:LQFP-32_7x7mm_P0.8mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-32(7x7), with 32 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C730107, with 8 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STM32G431K8T6 by STMicroelectronics, the STM32G431KBT6 by STMicroelectronics, the STM32G431K6T6 by STMicroelectronics and the MC56F8023VLC by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.
8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.