Skip to the content

TPS62933DRL

Texas InstrumentsExtended

-40℃~+150℃@(TJ) 1 12uA 2.2MHz 3.8V~30V 3A 800mV~22V Adjustable Buck Buck Built-in Yes SOT-583 DC-DC Converters ROHS

Part id
ti/TPS62933DRL
Category
DC DC Converters
Package
SOT-583
Pins
8
In stock
21,479 at JLCPCB (C3200405)
Used on
64 open-source boards

Overview

The TPS62933DRL is a DC DC Converter made by Texas Instruments in a SOT-583 package with 8 pins. -40℃~+150℃@(TJ) 1 12uA 2.2MHz 3.8V~30V 3A 800mV~22V Adjustable Buck Buck Built-in Yes SOT-583 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS62933, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-583-8, from KiCad's library), ready for a KiCad board. 21,479 are in stock at JLCPCB (part C3200405). 64 open-source boards in 39 repositories on GitHub use it.

Symbol

1RT2EN3VIN4GND5SW6BST7SS8FB
Regulator_Switching:TPS62933From KiCad's library

Footprint

Package_TO_SOT_SMD:SOT-583-8From KiCad's library

From the datasheet

17
Supply, least
3.8 V · VIN, recommended operating min · p. 5
Supply, most
30 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
32 V · VIN, absolute maximum · p. 5
Junction, hottest
150 °C · Operating junction temperature max · p. 5
Takes working
12 µA · VIN nonswitching quiescent current typical, EN = 5 V, VFB = 0.85 V · p. 6
Takes asleep
2 µA · Shutdown supply current typical, VEN = 0 V · p. 6
Gives
3 A · Continuous output current max, TPS62933 · p. 5
Current limit
5 A · High-side MOSFET current limit typical · p. 6
Feedback reference
800 mV · FB voltage typical, TJ = 25°C · p. 6
Switches at
500 kHz · Switching center frequency typical, RT floating · p. 7
Switches at
1.2 MHz · Switching center frequency typical, RT = GND · p. 7
Switches at
310 kHz · Switching center frequency typical, RT = 71.5 kΩ · p. 7
Switches at
2.1 MHz · Switching center frequency typical, RT = 9.09 kΩ · p. 7
Junction to air (DRL (SOT583), 8 PINS)
112.2 K/W · Junction-to-ambient, JEDEC board · p. 6
Junction to air (DRL (SOT583), 8 PINS)
60.2 K/W · Junction-to-ambient, official EVM board · p. 6
Junction to case (DRL (SOT583), 8 PINS)
29.1 K/W · Junction-to-case top, JEDEC board · p. 6
Junction to board (DRL (SOT583), 8 PINS)
19.3 K/W · Junction-to-board, JEDEC board · p. 6

What it is and has

14
Input voltage range
3.8 V to 30 V · p. 1
Output voltage range
0.8 V to 22 V · p. 1
Integrated MOSFETs
76 mΩ and 32 mΩ · p. 1
Reference accuracy
0.8 V ± 1% at 25°C · p. 1
Maximum duty cycle
98% · p. 1
Operating junction temperature
–40°C to 150°C · p. 1
Selectable switching frequency
200 kHz to 2.2 MHz · p. 1
Prebiased startup
Supported · p. 1
Protection
Non-latched OTP, OCP, OVP, UVP, and UVLO · p. 1
Package
SOT583, 1.6 mm × 2.1 mm · p. 1
Output current and operating mode
3 A, PFM, SS pin · p. 3
Frequency spread spectrum
Supported · p. 3
Reference voltage
0.8 V ± 1% at 25°C · p. 1
Enable
Precision EN threshold · p. 1

Around it

11
cap 100-nF
between BST and SW; High-quality ceramic bootstrap capacitor for the high-side FET driver. · p. 3
res 10.2 kΩ
between FB and GND; R7, lower feedback divider resistor in the 5-V output example; use 1% tolerance or better. · p. 29
res 53.6 kΩ
between VOUT and FB; R6, upper feedback divider resistor in the 5-V output example. · p. 29
cap 33 nF
between SS and GND; C4 in the example; sets soft-start time to approximately 5 ms. · p. 29
cap 6.8 nF
between SS and GND; Minimum required capacitance; SS must not float. · p. 29
cap 0.1 µF
between BST and SW; Required ceramic bootstrap capacitor; X5R or better dielectric and voltage rating of at least 16 V. · p. 29
res < 10 Ω
between BST and bootstrap capacitor; Optional series resistor R4 to reduce SW voltage spikes. · p. 29
cap 2 × 22 μF
between VOUT and GND; Example output capacitor bank: 35-V ceramic C3216X5R1V226M160AC, 1206 case; account for DC bias derating. · p. 32
cap 10 μF
between VIN and GND; Typical recommended input decoupling capacitance; X5R or X7R ceramic, accounting for DC bias. · p. 32
cap 100 nF
between VIN and GND; Connect directly to the device pins for high frequency filtering. · p. 38
cap 10 pF
between VOUT and FB; Optional feedforward capacitor C9 across the upper feedback resistor to improve load transient performance. · p. 33

Specifications

60
ParameterConditionsAs printedPage
Input voltageVINmin -0.3 · max 32 V5
Input voltageENmin -0.3 · max 6 V5
Input voltageFBmin -0.3 · max 6 V5
Output voltageSW, DCmin -0.3 · max 32 V5
Output voltageSW, transient < 10 nsmin -3 · max 33 V5
Output voltageBSTmin -0.3 V5
Output voltageBST–SWmin -0.3 · max 6 V5
Output voltageSS/PG; SS on TPS62933min -0.3 · max 6 V5
Output voltageRTmin -0.3 · max 6 V5
Operating junction temperature(2) TJmin -40 · max 150 °C5
Storage temperature Tstgmin -65 · max 150 °C5
Input voltageVINmin 3.8 · max 30 V5
Input voltageENmin -0.1 · max 5.5 V5
Input voltageFBmin -0.1 · max 5.5 V5
Output voltageVOUTmin 0.8 · max 22 V5
Output voltageSW, DCmin -0.1 · max 30 V5
Output voltageSW, transient < 10 nsmin -3 · max 32 V5
Output voltageBSTmin -0.1 V5
Output voltageBST-SWmin -0.1 · max 5.5 V5
Ouput current IOUTTPS62933, TPS62933xmin 0 · max 3 A5
Temperature TJOperating junction temperaturemin -40 · max 150 °C5
Junction-to-ambient thermal resistance RθJATPS6293x, DRL (SOT583), 8 PINS; JEDECtyp 112.2 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)TPS6293x, DRL (SOT583), 8 PINS; JEDECtyp 29.1 °C/W6
Junction-to-board thermal resistance RθJBTPS6293x, DRL (SOT583), 8 PINS; JEDECtyp 19.3 °C/W6
Junction-to-top characterization parameter ΨJTTPS6293x, DRL (SOT583), 8 PINS; JEDECtyp 1.6 °C/W6
Junction-to-board characterization parameter ΨJBTPS6293x, DRL (SOT583), 8 PINS; JEDECtyp 19.2 °C/W6
Junction-to-ambient thermal resistance on official EVM board RθJA_EVMTPS6293x, DRL (SOT583), 8 PINS; EVMtyp 60.2 °C/W6
Operation input voltage VINmin 3.8 · max 30 V6
Nonswitching quiescent current IQEN = 5 V, VFB = 0.85 V, TPS62932, TPS62933, and TPS62933Ptyp 12 uA6
Shutdown supply current ISHDNVEN = 0 Vtyp 2 uA6
Input undervoltage lockout thresholds VIN_UVLORising thresholdmin 3.4 · typ 3.6 · max 3.8 V6
Input undervoltage lockout thresholds VIN_UVLOFalling thresholdmin 3.1 · typ 3.3 · max 3.5 V6
Input undervoltage lockout thresholds VIN_UVLOHysteresistyp 300 mV6
Enable threshold VEN_RISERising enable thresholdtyp 1.21 · max 1.28 V6
Disable threshold VEN_FALLFalling disable thresholdmin 1.1 · typ 1.17 V6
EN pullup current IpVEN = 1.0 Vtyp 0.7 uA6
EN pullup hysteresis current IhVEN = 1.5 Vtyp 1.4 uA6
FB voltage VFBTJ = 25°Cmin 792 · typ 800 · max 808 mV6
FB voltage VFBTJ = 0°C to 85°Cmin 788 · typ 800 · max 812 mV6
FB voltage VFBTJ = –40°C to 150°Cmin 784 · typ 800 · max 816 mV6
Input leakage current IFBVFB = 0.8 Vmax 0.15 uA6
High-side MOSFET on-resistance RDSON_HSTJ = 25°C, VBST – SW = 5 Vtyp 76 mΩ6
Low-side MOSFET on-resistance RDSON_LSTJ = 25°Ctyp 32 mΩ6
High-side MOSFET current limit IHS_LIMITTPS62933 and TPS62933xmin 4.2 · typ 5 · max 5.8 A6
Low-side MOSFET current limit ILS_LIMITTPS62933 and TPS62933xmin 2.9 · typ 3.8 · max 4.5 A7
Minimum peak inductor current IPEAK_MINTPS62933, TPS62933P, and TPS62933Otyp 0.75 A7
Soft-start charge current ISSTPS62932, TPS62933, and TPS62933Fmin 4.5 · typ 5.5 · max 6.5 uA7
Switching center frequency fSWRT = floatingmin 450 · typ 500 · max 550 kHz7
Switching center frequency fSWRT = GNDmin 1000 · typ 1200 · max 1350 kHz7
Switching center frequency fSWRT = 71.5 kΩtyp 310 kHz7
Switching center frequency fSWRT = 9.09 kΩtyp 2100 kHz7
Minimum ON pulse width tON_MINNot production tested, specified by designtyp 70 ns7
Minimum OFF pulse width tOFF_MINNot production tested, specified by designtyp 140 ns7
Maximum ON pulse width tON_MAXNot production tested, specified by designtyp 7 us7
Output OVP threshold VOVPOVP detect (L→H)min 112 · typ 115 · max 118 %7
Output OVP threshold VOVPHysteresistyp 5 %7
Output UVP threshold VUVPUVP detect (H→L)typ 65 %7
UV hiccup ON time before entering hiccup mode after soft start ends thiccup_ONtyp 256 us7
Thermal shutdown threshold TSHDNShutdown temperature; not production tested, specified by designtyp 165 °C7
Hysteresis THYSThermal shutdown; not production tested, specified by designtyp 30 °C7

Pins, by the datasheet

8
1 RT
Frequency programming input: float for 500 kHz, tie to GND for 1.2 MHz, or connect an RT timing resistor. · p. 3
2 EN
Drive high or leave floating to enable; an external resistor divider can implement adjustable VIN UVLO. · p. 3
3 VIN
Supply input to the internal LDO and high-side FET; connect input bypass capacitors directly between VIN and GND. · p. 3
4 GND
Connect to system ground and the ground sides of CIN and COUT; keep the path to CIN as short as possible. · p. 3
5 SW
Switching output connected internally to the high-side FET source and low-side FET drain; connect to the power inductor. · p. 3
6 BST
Bootstrap connection for the high-side FET driver; connect a high-quality 100-nF ceramic capacitor to SW. · p. 3
7 SS
Connect an external capacitor to adjust soft-start time. · p. 3
8 FB
Voltage reference feedback pin. · p. 6

Ordering codes, by the datasheet

2
TPS62933DRLR
SOT-5X3 (DRL) · 8 pins; 4000 units, LARGE T&R; lead finish Call TI | Sn · p. 44
TPS62933DRLR.A
SOT-5X3 (DRL) · 8 pins; 4000 units, LARGE T&R; lead finish SN · p. 44

Open-source boards using it

64See all 64
  • 2 layers89.2 × 103.5 mmOas, the printed circuit board in 3D

    Oas

    hubertciebiada/open-ambient-sensor

    OAS — Open Ambient Sensor: DIY multi-sensor indoor environmental monitor (CO2, PM, VOC/NOx, temperature/humidity, mmWave presence) on ESP32-C6 with ESPHome / Home Assistant integration

    64 parts44GPL-3.0
  • 6 layers39.5 × 39.5 mmP4eregrine, the printed circuit board in 3D

    P4eregrine

    anticitizn/p4eregrine

    All-in-one ESP32 P4-based drone ESC, flight controller, and video processor

    359 parts21
  • 4 layers136.3 × 71.1 mmMSign, the printed circuit board in 3D

    MSign

    mincrmatt12/MSign

    internet-connected led sign control system

    169 parts11MIT
  • 2 layers49 × 75 mmDuoDrive, the printed circuit board in 3D

    DuoDrive

    ManhTi3012/DuoDrive

    Duo closed-loop brushed motor driver

    115 parts10
  • 4 layers182.2 × 104.7 mmPowerDistribution, the printed circuit board in 3D

    PowerDistribution

    LHRIC/Monorepo-26-27

    Monorepo for the 26-27 Season

    318 parts4
  • 2 layers79 × 59.5 mmCATSTNC R2, the printed circuit board in 3D

    CATSTNC R2

    CamK06/CATS-Base-Hardware

    An RP2040-based CATS transceiver

    77 parts3
  • 4 layers190.5 × 160 mmTopiary TrimBot, the printed circuit board in 3D

    Topiary TrimBot

    griffinross2/Topiary-TrimBot

    Topiary TrimBot, an automatic topiary trimming robot. Purdue ECE Senior Design group E11 for 49595 in Fall 2025.

    285 parts2GPL-3.0

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the TPS62933DRL?

Yes. The symbol is Regulator_Switching:TPS62933 and the footprint Package_TO_SOT_SMD:SOT-583-8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS62933DRL?

SOT-583, with 8 pins. Its footprint is drawn on this page.

Where is the TPS62933DRL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS62933DRL?

JLCPCB lists it as part C3200405, with 21,479 in stock; the sellers' links on this page open their listings.

What can replace the TPS62933DRL?

Parts like it in the library: the TPS62933FDRL by Texas Instruments, the TPS62933ODRL by Texas Instruments, the TPS62933PDRL by Texas Instruments and the TPS563300DRL by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS62933DRL?

64 boards in 39 repositories on GitHub; the most starred are listed on this page, with their KiCad files.