4 layers60 × 75 mm
Mixed Signal Demo PCB
rcardenes/FEDEVEL-Mixed-Signal-PCB
KiCAD files for the Mixed-Signal Hardware Design course at Fedevel, by Phil Salmony
114 parts2
4 layers68.6 × 88.9 mm
Adacus
AoToS/Adacus1Mixed signal PCB with op-amps, filters, ADC/DAC interfaces. ADACUS
- Size
- 68.6 × 88.9 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 115
- Nets
- 89
- Pads
- 345
- Tracks, vias
- 593, 151
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Mar 2024
- Updated
- 19 Aug 2024
Overview
Adacus is an open-source printed circuit board by AoToS, from the AoToS/Adacus repository on GitHub. It is a 4-layer board of 68.6 × 88.9 mm with 115 parts on 89 nets, routed with 593 tracks and 151 vias.
It is built around the STM32F103CBT6, MCP6001UT-E/OT(MS) and MCP6001-E/OT, with the TLV62569DBV, HT7533-1 and USBLC6-2SC6 among its other parts. Its parts include 46 capacitors, 36 resistors, 11 ICs, 9 diodes and 4 connectors. It belongs with the audio and music and sensors and measurement boards and the STM32 boards of this library.
Main components
8
STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MCP6001UT-E/OT(MS)
SOT-23-5-2.75V~-1.35V、1.35V~2.75V -25℃~+85℃ 1 1.2V/us 1.5MHz 1pA 2.1V~5.5V 28uA 2pA 500uV 650nV/℃ 95dB Built-in compensation、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMSKSEMIOperational AmplifierMCP6001-E/OT
SOT-23-5-40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierTLV62569DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersHT7533-1
SOT-23-5-40℃~+85℃@(Ta) 1 100mA 2.5uA 25mV@(1mA) 3.3V 30V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
ASMB-MTB0-0A3A2
SMD3528-40℃~+100℃ 115° Common Anode Top-mount White Lens SMD3528 RGB LEDs ROHSBroadcom LimitedLight Emitting Diodes (LED)
CMF3216F-900-2P-T
SMD-4P,3.2x1.6mm-40℃~+85℃ 10MΩ 2 300mΩ 400mA 50V 90Ω@100MHz SMD-4P,3.2x1.6mm Common Mode Filters ROHSHYHONGYEXCommon Mode Filters
Parts
115| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100n | Capacitor_SMD:C_0402_1005Metric | C108, C201, C202, C203, C204, C210, C211, C212, C213, C303, C305, C306, C309, C310, C314, C401 +1 |
| 7 | 10u | Capacitor_SMD:C_0603_1608Metric | C200, C300, C301, C302, C304, C307, C400 |
| 7 | 6k8 | Resistor_SMD:R_0402_1005Metric | R305, R306, R307, R402, R403, R404, R405 |
| 6 | 150p | Capacitor_SMD:C_0402_1005Metric | C308, C311, C312, C315, C403, C404 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R209, R210, R211, R302, R308, R309 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C100, C101, C206, C207, C402 |
| 5 | 22u | Capacitor_SMD:C_0603_1608Metric | C102, C103, C104, C105, C107 |
| 5 | 49R9 | Resistor_SMD:R_0402_1005Metric | R205, R206, R207, R208, R300 |
| 5 | PESD3V3L1UB,115 | Diode_SMD:D_SOD-523 | D201, D202, D203, D204, D205 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm | H100, H101, H102, H103 |
| 3 | 0R | Resistor_SMD:R_0402_1005Metric | R201, R301, R400 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R200, R202, R203 |
| 3 | 1K | Resistor_SMD:R_0402_1005Metric | R103, R104, R105 |
| 3 | MCP6001UT-E/OT | Package_TO_SOT_SMD:SOT-23-5 | U302, U303, U401 |
| 2 | 10n | Inductor_SMD:L_0402_1005Metric | L100, L200 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C208, C209 |
| 2 | 1n | Capacitor_SMD:C_0402_1005Metric | C313, C405 |
| 2 | 2M2 | Resistor_SMD:R_0402_1005Metric | R303, R304 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R212, R213 |
| 2 | PESD3V3L1UB,115 | Diode_SMD:D_SOD-523 | D300, D400 |
| 2 | ~ | Package_SO:VSSOP-10_3x3mm_P0.5mm | U300, U400 |
| 2 | ~ | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J300, J400 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R101 |
| 1 | 10R | Resistor_SMD:R_0402_1005Metric | R100 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R401 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C205 |
| 1 | 16MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y200 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R204 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R102 |
| 1 | 68u | Inductor_SMD:L_Cenker_CKCS4020 | L101 |
| 1 | ASMB-MTB0-0A3A2 | LED_SMD:LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D200 |
| 1 | CMF3216F-900-2P-T | Inductor_SMD:L_CommonModeChoke_Coilcraft_0603USB | FL200 |
| 1 | DNP | Capacitor_SMD:C_0402_1005Metric | C106 |
| 1 | HT7533-1 | Package_TO_SOT_SMD:SOT-89-3 | U100 |
| 1 | LED | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D100 |
| 1 | MCP6001-E/OT | Package_TO_SOT_SMD:SOT-23-5 | U102 |
| 1 | REF3033 | Package_TO_SOT_SMD:SOT-23 | U301 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U200 |
| 1 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U101 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U201 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J200 |
| 1 | ~ | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J201 |
Similar boards
- 4 layers50 × 70 mm
Nemesis MixSigPCB
abenstirling/SASG
USB-powered, single-channel, low-frequency signal analyser and signal generator
119 parts1 - 2 layers55 × 80 mm
MixedSignalKicad
republicofmakers/HW-KICAD-MCU-STM32-External-ADC-DAC
Mixed Signal Hardware Design with Kicad
125 parts1MIT - 4 layers60 × 75 mm
MixSig PCB
MaheshChowdaryDamuluri/MixSig-PCB
To achieve maximum signal integrity, minimize systemic noise, and prevent cross-talk, the design utilizes a strict hierarchical schematic layout structure and isolates sensitive data conversion components onto…
114 partsMIT - 4 layers41.1 × 72.7 mm
- 4 layers60 × 75 mm
- 4 layers60 × 75 mm
MixedSignal Analyzer Generator
landjas09/SPECTRA-MX-1-
A four-layer mixed-signal PCB designed in KiCad for analog signal acquisition and generation, targeting the 20 Hz–20 kHz range.
116 parts - 4 layers60 × 70 mm
Mixedsignal
npgo22/mixedsignal
A follow-along of Philip Salmony's Mixed-Signal Hardware Design with KiCad
114 parts
Questions
How big is the Adacus PCB?
It measures 68.6 × 88.9 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Adacus use?
115 parts, built around the STM32F103CBT6, MCP6001UT-E/OT(MS), MCP6001-E/OT and TLV62569DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adacus KiCad files?
From the AoToS/Adacus repository on GitHub, at the commit this page was made from: the board is Kicad files/ADACUS.kicad_pcb and its schematic Kicad files/ADACUS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adacus design in my own project?
Its repository states no licence, so its author keeps all rights: ask AoToS before reusing the design.