10 layers224.5 × 160 mm
Haasoscope pro adc fpga board
drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
586 parts485MIT
ADC
36 boardsKiCad boards from 28 GitHub repositories tagged “adc”, the most starred first; open any of them in PCBKit.
- 4 layers150 × 90 mm
Misrc v2.5-rounded
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
328 parts236CC-BY-4.0 - 2 layers113 × 62.2 mm
FullScope
tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen
15 parts165Apache-2.0 - 2 layers100 × 100 mm
Explorer
anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.
266 parts100 - 4 layers60.2 × 20.8 mm
PhaseLatchMini
AndersBNielsen/PhaseLatchMini
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board.
63 parts72 - 2 layers60 × 150 mm
Kosmo multitool
polykit/kosmo-multitool
Arduino Nano Every based development platform for DIY synthesizer enthusiasts.
131 parts31 - 2 layers
- 2 layers98 × 54.5 mm
Pico2 dual12bitadc
Sev5000/RP2350B_DualADC_DualPCM
A PCB to neatly package a rp2350b with two 12bit high speed adc and four channel audio input for use with hsdaoh
76 parts23 - 4 layers55.5 × 64.5 mm
Pico2 12bitadc
Sev5000/Pico2_12bitADC_PCMAudio
PCB to neatly package a Raspberry Pi Pico 2 with an AD9226 12bit ADC and PCM1802 for capture with HSDAOH
36 parts22 - 2 layers68.6 × 53.3 mm
Uno
nerdyscout/Arduino_MCP3x6x_Library
Library to support Microchip MPC3x6x 16/24bit analog to digital converters.
34 parts20MIT - 2 layers
- 2 layers230 × 20 mm
Flute
KN-Hardwire/Electronic-Flute
Electronic Flute project developed by HARDWIRE Student Club at AGH University of Krakow
47 parts6MIT - 2 layers70.6 × 70.6 mm
ADCoctoSPI01
mlab-modules/ADCoctoSPI01
Octal input high-speed ADC with serial LVDS output.
80 parts3GPL-3.0 - 4 layers100 × 100 mm
AFE
Blaze-Pascal/Masters-Multi-Channel_DAQ
Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…
216 parts2GPL-3.0 - 2 layers40 × 20 mm
B HX711 PCB
Boardoza/Boardoza_HX711_Load_Cell_Amplifier_Breakout_Board
HX711 is a 24-bit ADC module designed for load cells and weigh scales, featuring low power consumption and high precision.
27 parts2CC-BY-SA-4.0 - 2 layers63 × 28 mm
Bf-028
botanicfields/PCB-ADC-Buttons-for-M5
a PCB converts 5 buttons into 1 analog output
22 parts2GPL-3.0 - 4 layers68.3 × 53.4 mm
Speed sensor
mcquerol/24ghz-imp165-speed-measurement
24GHz radar sensor (IMP165) project for speed measurement. Includes signal processing and embedded dev.
38 parts2 - 4 layers68.6 × 88.9 mm
- 2 layers40 × 20 mm
B NAU7802-BRK-01MBR R01
Boardoza/Boardoza_NAU7802_24bit_Dual_Channel_ADC_Breakout_Board
NAU7802 24-bit dual-channel ADC for high-precision load cell and sensor applications breakout board.
19 parts1CC-BY-SA-4.0 - 2 layers100 × 50 mm
Saab Rear LED Enabler
czabel-personal/saab_led_enabler
ESP32-based project to enable the use of LED bulbs in an OG Saab 9-5
32 parts1MIT - 2 layers25 × 15 mm
TFI2CADC01
ThunderFly-aerospace/TFI2CADC01
I2C Analog to digital converter for PixHawk
20 parts1GPL-3.0 - 2 layers40 × 20 mm
B ADS1115-BRK R1.0
Boardoza/Boardoza_ADS1115_16_Bit_ADC_Breakout_Board
ADS1115-based 16-bit ADC breakout board with four analog inputs, I²C communication, programmable gain, and differential measurement support.
22 partsCC-BY-SA-4.0 - 4 layers109 × 75.5 mm
Arty scope expansion board
Filip-Kubecki/arty-scope-expansion-board
Two-channel oscilloscope analog front-end shield for Arty A7 (KiCad)
138 parts - 2 layers
Placa tp AdC GAMBERALE v2
mgalcuadrado/tpAdC
En este repositorio se encuentran todos los archivos usados para la elaboración del TP Final de Análisis de Circuitos TB066 (cursada en 1C2024) y para la evaluación integradora (más que nada algunos scripts de Python…
34 parts