2 layers100 × 100 mm
Sync ope
cyberboy666/sync_ope
effect send + sync restoring circuit - adapted from a gael jaton design
78 parts52
2 layers
SegDispl
LeHack/DE0Nano_VHDL7A set of VHDL examples for DE0 Nano
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 38
- Pads
- 77
- Tracks, vias
- 162, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Oct 2016
- Updated
- 11 Jul 2017
Overview
SegDispl is an open-source printed circuit board by LeHack, from the LeHack/DE0Nano_VHDL repository on GitHub. It is a 2-layer board with 9 parts on 38 nets, routed with 162 tracks and 0 vias.
It is built around the 74HC4053D. Its parts include 4 resistors, 4 ICs and 1 connector. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
1README
README.mdDE0 Nano VHDL examples
This repository contains simple examples showing how to manipulate different devices in VHDL from a DE0 Nano FPGA board.
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 650 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2, R3, R4 |
| 2 | 74HC4053 | SegDispl:74HC4053 | U2, U3 |
| 1 | 74HC595-2 | SegDispl:74HC595 | U1 |
| 1 | CONN_01X09 | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.00mm | J1 |
| 1 | FJ-5461BH | SegDispl:FJ-5461BH | U4 |
Questions
What parts does the SegDispl use?
9 parts, built around the 74HC4053D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SegDispl KiCad files?
From the LeHack/DE0Nano_VHDL repository on GitHub, at the commit this page was made from: the board is src/SegmentDisplay/pcb/SegDispl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SegDispl design in my own project?
Its repository states no licence, so its author keeps all rights: ask LeHack before reusing the design.
Similar boards
- 2 layers120 × 80 mm
TrackerAVL
brengi/CESE-PCB
Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos
173 parts7 - 2 layers100 × 95.9 mm
- 4 layers100 × 95 mm
VCF1 rev1
ModularMayhem/mmm
A eurorack filter created in collaboration by the modular mayhem DIY folks
201 parts2 - 4 layers100 × 50 mm
Pcm5102a mux board
cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip
86 parts - 2 layers165 × 170 mm
Dual ctrl an dig mux
Omnistic/aion_bypass_pcb
All the SELECT bits are common and a single SELECT signal is also taken from the Inscoper Device Controller. This signal effectively switches between AION control and Inscoper control (for the cameras and lasers).
57 partsMIT - 4 layers51.4 × 21.1 mm
- 4 layers126 × 140 mm
