Skip to the content
12345678910111213141516

74HC4053D

NexperiaExtended

-40℃~+125℃ 20ns 21ns 2:1 2V~10V 3 5ns 80Ω SOIC-16 Analog Switches, Multiplexers ROHS

Part id
nexperia/74HC4053D
Category
Analog Switches, Multiplexers
Package
SO-16
Pins
16
In stock
6,567 at JLCPCB (C5647)
Used on
17 open-source boards

Overview

The 74HC4053D is an analog Switches, Multiplexer made by Nexperia in a SO-16 package with 16 pins. -40℃~+125℃ 20ns 21ns 2:1 2V~10V 3 5ns 80Ω SOIC-16 Analog Switches, Multiplexers ROHS.

PCBKit's library has its KiCad symbol (4xxx:4053, from KiCad's library) and its footprint (Package_SO:SO-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 6,567 are in stock at JLCPCB (part C5647). 17 open-source boards in 16 repositories on GitHub use it.

Symbol

1Y12Y03Z14Z5Z06Inh7VEE8VSS9C10B11A12X013X114X15Y16VDD
4xxx:4053From KiCad's library

Footprint

12345678910111213141516
Package_SO:SO-16_3.9x9.9mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
2 V · VCC - GND, recommended operating, min · p. 5
Supply, most
10 V · VCC - GND, recommended operating, max · p. 5
Supply, least
2 V · VCC - VEE, recommended operating, min · p. 5
Supply, most
10 V · VCC - VEE, recommended operating, max · p. 5
Supply, absolute maximum
11 V · VCC, absolute maximum · p. 5
Works from
-40 °C · ambient operating temperature, min · p. 5
Works up to
125 °C · ambient operating temperature, max · p. 5
Takes working
8 µA · ICC, VCC = 6 V, VEE = 0 V, inputs at rails, 25 °C, max · p. 8
Takes at most
320 µA · ICC, VCC = 10 V, VEE = 0 V, inputs at rails, -40 to +125 °C, max · p. 10
A pin gives at most
25 mA · ISW, per switch pin, absolute maximum magnitude · p. 5

Open-source boards using it

17See all 17
  • 2 layers100 × 100 mmSync ope, the printed circuit board in 3D

    Sync ope

    cyberboy666/sync_ope

    effect send + sync restoring circuit - adapted from a gael jaton design

    78 parts52
  • 2 layers120 × 80 mmTrackerAVL, the printed circuit board in 3D

    TrackerAVL

    brengi/CESE-PCB

    Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos

    173 parts7
  • 2 layersSegDispl, the printed circuit board in 3D

    SegDispl

    LeHack/DE0Nano_VHDL

    A set of VHDL examples for DE0 Nano

    9 parts7
  • 2 layers100 × 95.9 mmLCSDR, the printed circuit board in 3D

    LCSDR

    arsenal007/STM32-SDR_PCB

    KiCAD PCB Project of STM32 SDR, processor board

    268 parts3
  • 4 layers100 × 95 mmVCF1 rev1, the printed circuit board in 3D

    VCF1 rev1

    ModularMayhem/mmm

    A eurorack filter created in collaboration by the modular mayhem DIY folks

    201 parts2
  • 4 layers100 × 50 mmPcm5102a mux board, the printed circuit board in 3D

    Pcm5102a mux board

    cbaurtx/RetroBox

    RetroBox is an internet radio using an ESP32-S3 system on a chip

    86 parts
  • 2 layers165 × 170 mmDual ctrl an dig mux, the printed circuit board in 3D

    Dual ctrl an dig mux

    Omnistic/aion_bypass_pcb

    All the SELECT bits are common and a single SELECT signal is also taken from the Inscoper Device Controller. This signal effectively switches between AION control and Inscoper control (for the cameras and lasers).

    57 partsMIT
  • 4 layers51.4 × 21.1 mmScramble hat, the printed circuit board in 3D

    Scramble hat

    scrambletools/ES8389-Hat

    Hat for Waveshare ESP32-P4-ETH and Raspberry Pi Pico

    79 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74HC4053D?

Yes. The symbol is 4xxx:4053 and the footprint Package_SO:SO-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74HC4053D?

SO-16, with 16 pins. Its footprint is drawn on this page.

Where is the 74HC4053D datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the 74HC4053D?

JLCPCB lists it as part C5647, with 6,567 in stock; the sellers' links on this page open their listings.

What can replace the 74HC4053D?

Parts like it in the library: the HEF4053BT by Nexperia, the RS151XS16 by Jiangsu RUNIC Tech, the 74HC4053D-Q100 by Nexperia and the CD4051-DW by DOWO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74HC4053D?

17 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.