Skip to the content
12345

MCP6001-E/OT

Microchip TechnologyExtended

-40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS

Part id
microchip/MCP6001-E/OT
Category
Operational Amplifier
Package
SOT-23-5
Pins
5
In stock
35,877 at JLCPCB (C29429)
Used on
2 open-source boards

Overview

The MCP6001-E/OT is an operational Amplifier made by Microchip Technology in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Operational Amplifiers:Operational Amplifier Type7 [alt], from CERN's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 35,877 are in stock at JLCPCB (part C29429). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

34521
Operational Amplifiers:Operational Amplifier Type7 [alt]From CERN's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

10
Supply, least
1.8 V · VDD, recommended operating, min · p. 3
Supply, most
6 V · VDD, recommended operating, max · p. 3
Supply, absolute maximum
7 V · VDD – VSS, absolute maximum · p. 3
Works from
-40 °C · ambient operating temperature, min · p. 4
Works up to
125 °C · ambient operating temperature, max · p. 4
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 3
Takes working
100 µA · quiescent supply current, IO = 0, VDD = 5.5 V, VCM = 5 V, typical · p. 3
Takes at most
170 µA · quiescent supply current, IO = 0, VDD = 5.5 V, VCM = 5 V, max · p. 3
A pin gives at most
30 mA · output pin source or sink current, absolute maximum · p. 3
Junction to air (5-Lead SOT-23)
256 K/W · junction to ambient thermal resistance, typical · p. 4

Open-source boards using it

2
  • 4 layers60 × 75 mmMixed Signal Demo PCB, the printed circuit board in 3D

    Mixed Signal Demo PCB

    rcardenes/FEDEVEL-Mixed-Signal-PCB

    KiCAD files for the Mixed-Signal Hardware Design course at Fedevel, by Phil Salmony

    114 parts2
  • 4 layers68.6 × 88.9 mmAdacus, the printed circuit board in 3D

    Adacus

    AoToS/Adacus

    Mixed signal PCB with op-amps, filters, ADC/DAC interfaces. ADACUS

    115 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6001-E/OT?

Yes. The symbol is Operational Amplifiers:Operational Amplifier Type7 [alt] and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6001-E/OT?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the MCP6001-E/OT datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6001-E/OT?

JLCPCB lists it as part C29429, with 35,877 in stock; the sellers' links on this page open their listings.

What can replace the MCP6001-E/OT?

Parts like it in the library: the LMV321IDBVR by UMW, the LM321MF by UMW, the TLV9061IDBV by Texas Instruments and the LM321-TR by Gainsil. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6001-E/OT?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.