
Uv bench
L-A-7/Electronic-design
Learning workspace for electronics and PCB design (KiCad 10, STM32): UV bench and following projects
Texas InstrumentsExtended
-40℃~+125℃ 0.05pA 0.5pA 1 1.6mV 1.8V~5.5V 103dB 10MHz 10nV/√Hz@1kHz 50mA 530nV/℃ 538uA 6.5V/us Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS
The TLV9061IDBV is an operational Amplifier made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 0.05pA 0.5pA 1 1.6mV 1.8V~5.5V 103dB 10MHz 10nV/√Hz@1kHz 50mA 530nV/℃ 538uA 6.5V/us Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:TLV9061xDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 256,191 are in stock at JLCPCB (part C398358). 1 open-source board in 1 repository on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 电源电压 [(V+) – (V–)] | 在工作环境温度范围内 | min 0 · max 6 V | 10 |
| 信号输入引脚 电流(2) | min -10 · max 10 mA | 10 | |
| 额定温度 TA | min -40 · max 125 °C | 10 | |
| 结温 TJ | max 150 °C | 10 | |
| 贮存温度 Tstg | min -65 · max 150 °C | 10 | |
| 静电放电 V(ESD) | TLV9061 封装;人体放电模型 (HBM),符合 ANSI/ESDA/JEDEC JS-001 标准(1);值 ±2500 V | min -2500 · max 2500 V | 10 |
| 静电放电 V(ESD) | TLV9061 封装;充电器件模型 (CDM),符合 JEDEC 规范 JESD22-C101(2);值 ±1500 V | min -1500 · max 1500 V | 10 |
| 电源电压 (VS = [V+] – [V–]) VS | 在工作环境温度范围内 | min 1.8 · max 5.5 V | 10 |
| 额定温度 TA | min -40 · max 125 °C | 10 | |
| 结至环境热阻 RθJA | TLV9061,DBV (SOT-23),5 引脚 | typ 221.7 °C/W | 11 |
| 结至外壳(顶部)热阻 RθJC(top) | TLV9061,DBV (SOT-23),5 引脚 | typ 144.7 °C/W | 11 |
| 结至电路板热阻 RθJB | TLV9061,DBV (SOT-23),5 引脚 | typ 49.7 °C/W | 11 |
| 结至顶部特征参数 ψJT | TLV9061,DBV (SOT-23),5 引脚 | typ 26.1 °C/W | 11 |
| 结至电路板特征参数 ψJB | TLV9061,DBV (SOT-23),5 引脚 | typ 49 °C/W | 11 |
| 输入失调电压 VOS | VS = 5V;典型值 ±0.3,最大值 ±1.6 | typ 0.3 · max 1.6 mV | 13 |
| 输入失调电压 VOS | VS = 5V,TA = –40°C 至 125°C;最大值 ±2 | max 2 mV | 13 |
| 漂移 dVOS/dT | VS = 5V,TA = –40°C 至 125°C;典型值 ±0.53 | typ 0.53 uV/°C | 13 |
| 电源抑制比 PSRR | VS = 1.8V – 5.5V,VCM = (V–);典型值 ±7,最大值 ±80 | typ 7 · max 80 uV/V | 13 |
| 共模抑制比 CMRR | VS = 5.5V,(V–) – 0.1V < VCM < (V+) – 1.4V,TA = –40°C 至 125°C | min 80 · typ 103 dB | 13 |
| 共模抑制比 CMRR | VS = 5.5V,VCM = –0.1V 至 5.6V,TA = –40°C 至 125°C | min 57 · typ 87 dB | 13 |
| 共模抑制比 CMRR | VS = 1.8V,(V–) – 0.1V < VCM < (V+) – 1.4V,TA = –40°C 至 125°C | typ 88 dB | 13 |
| 共模抑制比 CMRR | VS = 1.8V,VCM = –0.1V 至 1.9V,TA = –40°C 至 125°C | typ 81 dB | 13 |
| 输入偏置电流 IB | 典型值 ±0.5 | typ 0.5 pA | 13 |
| 输入失调电流 IOS | 典型值 ±0.05 | typ 0.05 pA | 13 |
| 输入电压噪声(峰峰值) En | VS = 5V,f = 0.1Hz 至 10Hz | typ 4.77 uVPP | 13 |
| 输入电压噪声密度 en | VS = 5V,f = 10kHz | typ 10 nV/√Hz | 13 |
| 输入电压噪声密度 en | VS = 5V,f = 1kHz | typ 16 nV/√Hz | 13 |
| 输入电流噪声密度 in | f = 1kHz | typ 23 fA/√ Hz | 13 |
| 差分 CID | 输入电容 | typ 2 pF | 13 |
| 共模 CIC | 输入电容 | typ 4 pF | 13 |
| 开环电压增益 AOL | VS = 1.8V,(V–) + 0.04V < VO < (V+) – 0.04V,RL = 10kΩ | typ 100 dB | 13 |
| 开环电压增益 AOL | VS = 5.5V,(V–) + 0.05V < VO < (V+) – 0.05V,RL = 10kΩ | min 104 · typ 130 dB | 13 |
| 开环电压增益 AOL | VS = 1.8V,(V–) + 0.06V < VO < (V+) – 0.06V,RL = 2kΩ | typ 100 dB | 13 |
| 开环电压增益 AOL | VS = 5.5V,(V–) + 0.15V < VO < (V+) – 0.15V,RL = 2kΩ | typ 130 dB | 13 |
| 增益带宽积 GBP | VS = 5V,G = +1 | typ 10 MHz | 13 |
| 相位裕度 φm | VS = 5V,G = +1 | typ 55 ° | 13 |
| 压摆率 SR | VS = 5V,G = +1 | typ 6.5 V/us | 13 |
| 建立时间 tS | 精度达到 0.1%,VS = 5V,2V 阶跃,G = +1,CL = 100pF | typ 0.5 us | 13 |
| 过载恢复时间 tOR | VS = 5V,VIN × 增益 > VS | typ 0.2 us | 13 |
| 总谐波失真 + 噪声(1) THD + N | VS = 5.5V,VCM = 2.5V,VO = 1VRMS,G = +1,f = 1kHz;三阶滤波器,-3dB 时的带宽 = 80kHz | typ 0.0008 % | 13 |
| 相对于电源轨的电压输出摆幅 VO | VS = 5.5V,RL = 10kΩ | max 20 mV | 14 |
| 相对于电源轨的电压输出摆幅 VO | VS = 5.5V,RL = 2kΩ | max 60 mV | 14 |
| 短路电流 ISC | VS = 5V;典型值 ±50 | typ 50 mA | 14 |
| 开环输出阻抗 ZO | VS = 5V,f = 10MHz | typ 100 Ω | 14 |
| 每个放大器的静态电流 IQ | VS = 5.5V,IO = 0mA | typ 538 · max 750 uA | 14 |
| 每个放大器的静态电流 IQ | VS = 5.5V,IO = 0mA,TA = -40°C 至 125°C | max 800 uA | 14 |

L-A-7/Electronic-design
Learning workspace for electronics and PCB design (KiCad 10, STM32): UV bench and following projects
Yes. The symbol is Amplifier_Operational:TLV9061xDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C398358, with 256,191 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the LM321-TR by Gainsil, the LM321H-TR by Gainsil, the LMV321B-TR by 3PEAK and the OPA365AIDBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.