
Power profiler carrier
Guiimartinho/open-power-profiler
Open-source PPK2-class power profiler built on the Raspberry Pi Pico 2: 100 kSPS, 100 nA to 1 A auto-ranging, source meter and ampere meter modes, USB stream.
Texas InstrumentsExtended
-40℃~+125℃ 0.2pA 1 100uV 10pA 120dB 1uV/℃ 2.2V~5.5V 25V/us 4.5nV/√Hz@100kHz 50MHz 5mA 65mA ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS
The OPA365AIDBV is an operational Amplifier made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 0.2pA 1 100uV 10pA 120dB 1uV/℃ 2.2V~5.5V 25V/us 4.5nV/√Hz@100kHz 50MHz 5mA 65mA ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:OPA365xxDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 18,308 are in stock at JLCPCB (part C96626). 1 open-source board in 1 repository on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 电源电压 | max 5.5 V | 4 | |
| 信号输入端子,电压 | Relative to supply rails; input terminals diode-clamped to supply rails | min -0.5 · max 0.5 V | 4 |
| 信号输入端子,电流 | min -10 · max 10 mA | 4 | |
| 工作温度 TA | min -40 · max 150 °C | 4 | |
| 结温 TJ | max 150 °C | 4 | |
| 贮存温度 Tstg | min -65 · max 150 °C | 4 | |
| 静电放电 V(ESD) | 人体放电模型 (HBM),符合 ANSI/ESDA/JEDEC JS-001; ±4000 V | max 4000 V | 4 |
| 静电放电 V(ESD) | 充电器件模型 (CDM),符合 JEDEC 规范 JESD22-C101; ±1000 V | max 1000 V | 4 |
| 静电放电 V(ESD) | 机器模型; ±400 V | max 400 V | 4 |
| 电源电压,(V+) – (V–) | min 2.2 · max 5.5 V | 4 | |
| 额定温度范围 | min -40 · max 125 °C | 4 | |
| 工作温度 | min -40 · max 150 °C | 4 | |
| 结至环境热阻 RθJA | OPA365, DBV (SOT-23), 5 引脚 | typ 206.9 °C/W | 4 |
| 结至外壳(顶部)热阻 RθJC(top) | OPA365, DBV (SOT-23), 5 引脚 | typ 69.4 °C/W | 4 |
| 结至电路板热阻 RθJB | OPA365, DBV (SOT-23), 5 引脚 | typ 34.2 °C/W | 4 |
| 结至顶部的特征参数 ψJT | OPA365, DBV (SOT-23), 5 引脚 | typ 1.8 °C/W | 4 |
| 结至电路板的特征参数 ψJB | OPA365, DBV (SOT-23), 5 引脚 | typ 33.9 °C/W | 4 |
| 输入失调电压 VOS | TA = 25°C,RL = 10kΩ 连接至 VS/2,VCM = VS/2,VOUT = VS/2 | typ 100 · max 200 uV | 5 |
| 输入失调电压与漂移间的关系 dVOS/dT | TA = -40°C 至 +125°C 时 | typ 1 uV/°C | 5 |
| 输入失调电压与电源间的关系 PSRR | VS = 2.2V 至 5.5V,TA = -40°C 至 +125°C 时 | typ 10 uV/V | 5 |
| 输入偏置电流 IB | TA = 25°C; typical ±0.2 pA, maximum ±10 pA | typ 0.2 · max 10 pA | 5 |
| 输入偏移电流 IOS | TA = 25°C; typical ±0.2 pA, maximum ±10 pA | typ 0.2 · max 10 pA | 5 |
| 输入电压噪声 en | f = 0.1Hz 至 10Hz | typ 5 uVPP | 5 |
| 输入电压噪声密度 en | f = 100kHz | typ 4.5 nV/√Hz | 5 |
| 输入电流噪声密度 in | f=10kHz | typ 4 fA/√Hz | 5 |
| 共模抑制比 CMRR | (V-) - 0.1V ≤ VCM ≤ (V+) + 0.1V,TA = -40°C 至 +125°C 时 | min 100 · typ 120 dB | 5 |
| 差分 | 输入电容 | typ 6 pF | 5 |
| 共模 | 输入电容 | typ 2 pF | 5 |
| 开环电压增益 AOL | RL = 10kΩ,100mV < VO < (V+) – 100mV,TA = −40°C 至 +125°C 时 | min 100 · typ 120 dB | 5 |
| 开环电压增益 AOL | RL = 600Ω,200mV < VO < (V+) – 200mV,TA = 25°C | min 100 · typ 120 dB | 5 |
| 开环电压增益 AOL | RL = 600Ω,200mV < VO < (V+) – 200mV,TA = −40°C 至 +125°C 时 | min 94 dB | 5 |
| 增益带宽积 GBW | VS = 5V | typ 50 MHz | 5 |
| 压摆率 SR | VS = 5V,G = 1 | typ 25 V/us | 5 |
| 建立时间 tS | 0.1%,VS = 5V,4V 阶跃,G = +1 | typ 200 ns | 5 |
| 建立时间 tS | 0.01%,VS = 5V,4V 阶跃,G = +1 | typ 300 ns | 5 |
| 总谐波失真 + 噪声 THD+N | VS = 5V,RL = 600Ω,VO = 4VPP,G = 1,f = 1kHz;三阶滤波器,带宽 80kHz (−3dB) | typ 0.0004 % | 5 |

Guiimartinho/open-power-profiler
Open-source PPK2-class power profiler built on the Raspberry Pi Pico 2: 100 kSPS, 100 nA to 1 A auto-ranging, source meter and ampere meter modes, USB stream.
Yes. The symbol is Amplifier_Operational:OPA365xxDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C96626, with 18,308 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the LMV321B-TR by 3PEAK, the LMV321LILT by STMicroelectronics, the RS821XF by Jiangsu RUNIC Tech and the RS8411XF by Jiangsu RUNIC Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.