Skip to the content
12345

COS8051SOT

COSINEExtended

-2.25V~2.25V -40℃~+125℃ 1 100MHz 100mA 125dB 150V/us 1pA 2.5V~5.5V 2.5pA 2.6mA 2uV/℃ 5mV 8nV/√Hz@1kHz Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOT23-5 Operational Amplifier ROHS

Part id
cosine/COS8051SOT
Category
Operational Amplifier
Package
SOT23-5
Pins
5
In stock
5,514 at JLCPCB (C7463385)
Used on
3 open-source boards

Overview

The COS8051SOT is an operational Amplifier made by COSINE in a SOT23-5 package with 5 pins. -2.25V~2.25V -40℃~+125℃ 1 100MHz 100mA 125dB 150V/us 1pA 2.5V~5.5V 2.5pA 2.6mA 2uV/℃ 5mV 8nV/√Hz@1kHz Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOT23-5 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LTC6240CS5#TRMPBF, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 5,514 are in stock at JLCPCB (part C7463385). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

4IN-3IN+2-VS1OUT5+VS
EasyEDA_Cloud:LTC6240CS5#TRMPBFFrom EasyEDA

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

8
Supply, least
2.5 V · +Vs to -Vs, recommended operating min · p. 3
Supply, most
5.5 V · +Vs to -Vs, recommended operating max · p. 3
Supply, absolute maximum
6 V · +Vs to -Vs, absolute max · p. 3
Works from
-40 °C · Operating ambient temperature, recommended min · p. 3
Works up to
85 °C · Operating ambient temperature, recommended max · p. 3
Junction, hottest
150 °C · Junction temperature, absolute max · p. 3
Takes working
2.6 mA · Quiescent current per amplifier, VS=5V, typical · p. 4
Junction to air (SOT23-5)
190 K/W · Junction-to-ambient thermal resistance · p. 3

What it is and has

6
Bandwidth
175 MHz at -3dB · p. 1
Slew rate
150 V/µs · p. 1
Input and output
Rail-to-rail · p. 1
Stability
Unity gain stable · p. 1
Phase reversal
No phase reversal · p. 1
Package options
SOT23-5/SOP-8 · p. 1

Around it

3
cap 0.1μF
between +Vs and GND; Ceramic supply bypass capacitor, close to the +Vs pin. · p. 6
cap 0.1μF
between -Vs and GND; Separate ceramic bypass capacitor for dual-supply operation, close to the part. · p. 6
res 1 kΩ
between OUT and capacitive load; Starting value for series RISO when capacitive loading causes excessive peaking or overshoot; adjust on the bench. · p. 5

Specifications

29
ParameterConditionsAs printedPage
Power Supply: +Vs to -Vsmax 6 V3
Input Current (2)max 10 mA3
Storage Temperature Rangemin -65 · max 150 °C3
Junction Temperaturemax 150 °C3
Operating Temperature Rangemin -40 · max 125 °C3
ESD Susceptibility, HBMmax 2000 V3
Package Thermal Resistance, RθJA (Juntion-to-ambient) RθJASOT23-5max 190 °C/W3
DC Supply Voltagemin 2.5 · max 5.5 V3
Operating Ambient Temperaturemin -40 · max 85 °C3
Input Offset Voltage VOSValues are ± magnitudes; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 2 · max 20 mV4
Input Offset Voltage Drift ΔVOS/ΔT-40 to 125°C; value is ± magnitude; +VS=+5V, -VS=0, VCM=VS/2, RL=2kΩ to VS/2typ 2 uV/°C4
Input Bias Current IBValue is ± magnitude; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 3 pA4
Input Offset Current IOSValue is ± magnitude; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 1 pA4
Common-Mode Voltage Range VCM+VS=+5V, -VS=0, TA=+25°C, RL=2kΩ to VS/2min -0.1 · max 5.6 V4
Common-Mode Rejection Ratio CMRRVCM =0.1V to 5.6V; +VS=+5V, -VS=0, TA=+25°C, RL=2kΩ to VS/2min 60 · typ 80 dB4
Open-Loop Voltage Gain AOLVO=0.4V to 4.6V; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 100 dB4
Output Voltage Swing from RailRL=10kΩ; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°Ctyp 10 mV4
Output Voltage Swing from RailRL=2kΩ; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°Ctyp 25 mV4
Output Voltage Swing from RailRL=150Ω; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°Ctyp 200 mV4
Short-Circuit Current ISRSourcing; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°Ctyp 100 mA4
Short-Circuit Current ISKSinking; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°Ctyp 120 mA4
Operating Voltage RangeTA=+25°Cmin 2.5 · max 5.5 V4
Quiescent Current / Amplifier IQVS=5V; -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 2.6 mA4
Power Supply Rejection Ratio PSRRVS = 2.5V to 5.5V; -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 100 dB4
Small-Signal Bandwidth f-3dBG=+1; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 175 MHz4
Gain Bandwidth Product GBWPG=+10; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 100 MHz4
Slew Rate SRG = +1 , 4V Step; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 150 V/us4
Settling Time to 0.1% tSG = +1 , 4V Step; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 50 ns4
Voltage Noise Density enf=1kHz; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=2kΩ to VS/2typ 8 nV/√Hz4

Ordering codes, by the datasheet

1
COS8051SOT
SOT23-5 · Single amplifier; tape and reel, 3000 · p. 2

Open-source boards using it

3
  • 6 layers26.9 × 26.9 mmOpenFC, the printed circuit board in 3D

    OpenFC

    OpenDrone-hw/OpenFC-Lite-Mini

    Open-source Betaflight flight controller. RP2354A, 20x20 mm, 6-layer, 3-6S, CERN-OHL-S-2.0.

    131 parts147CERN-OHL-S-2.0
  • 6 layers37.9 × 37.9 mmOpenFC, the printed circuit board in 3D

    OpenFC

    OpenDrone-hw/OpenFC-Lite

    Open-source Betaflight flight controller. RP2354B, 30.5x30.5 mm, 6-layer, 3-8S, CERN-OHL-S-2.0.

    164 parts85CERN-OHL-S-2.0
  • 8 layers35 × 35 mmOpenAIO, the printed circuit board in 3D

    OpenAIO

    OpenDrone-hw/OpenAIO

    Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.

    343 parts19CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the COS8051SOT?

Yes. The symbol is EasyEDA_Cloud:LTC6240CS5#TRMPBF and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the COS8051SOT?

SOT23-5, with 5 pins. Its footprint is drawn on this page.

Where is the COS8051SOT datasheet?

COSINE publishes it: the Datasheet link on this page opens it.

Where can I order the COS8051SOT?

JLCPCB lists it as part C7463385, with 5,514 in stock; the sellers' links on this page open their listings.

What can replace the COS8051SOT?

Parts like it in the library: the LMV321B-TR by 3PEAK, the RS821XF by Jiangsu RUNIC Tech, the AD8615AUJZ-REEL7 by Analog Devices and the TPH2501-TR by 3PEAK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the COS8051SOT?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.