
AS5600 Breakout
kanestoboi/AS5600-Nema-17-Board
A magnetic contactless encoder board for the NEMA 17 motor
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

kanestoboi/AS5600-Nema-17-Board
A magnetic contactless encoder board for the NEMA 17 motor

runger1101001/Magnetic_Encoders
Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

y2kblog/AS5600_BreakoutBoard_V1_0
12bit分解能の磁気式アブソリュートエンコーダAS5600(アナログ/PWM出力)を2.54mmピッチに変換する基板

dhairyashah1/BLDC-Encoder-PCB
This repository contains KiCAD Design Files for Encoder PCB made using AS5600 hall sensor based Encoder Chip for SRA-VJTI's BLDC Actuator and Quadraped Testing.



mauicv/as5600-breakout
Breakout board for the AS5600 magnetic rotary encoder. Aims to be as minimal as possible and only exposes the I2C interface at 3v3 in a small form factor. Uses a 4 pin JST-PH connector for power, ground and I2C.


ShaanJ1/AS5600-NEMA-17-Mounts
Mounting hardware for attaching the AS5600 rotary encoder onto the back of the NEMA 17 stepper motor Includes a magnet centering jig which helps you properly center the magnet onto the rear shaft to glue it in place

Sutej2907/PCB_DESIGN_STM_AS5600
STM32 BLUE PILL F103C8 AND MAGNETIC ENCODER AS5600 CHIPS INTEGRATED PCB

tomqdev/tiltr
Repo for the ROS components of my latest attempt at an autonomous mobile manipulator


runger1101001/Magnetic_Encoders
Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.



Jerome-Graves/fabric-analyser
Automated cross-polarised optical scanner for measuring crystal orientation fabric (COF) in ice-core thin sections: RP2350 firmware, Python control/calibration software, KiCad hardware, and full docs.

RyanBLeon28/Estacao-Meteorologica
As estações meteorológicas são equipamentos utilizados para monitoramento e registro de condições climáticas por meio de sensores que analisam parâmetros atmosféricos como temperatura, umidade, pressão, velocidade e…

SohumNigam/StabilityBot_MK1
A self-balancing two-wheeled robot. an inverted pendulum stabilized by IMU feedback and PID motor control, being built up toward full 4-state LQR control on a custom PCB.

ambadran/Revolute_Joint
Optimal Cheap Robotic Actuator allowing high Torque and moderate Speed. Allow PRECISE Absolute, Speed and Torque Control. Using 3D-printed Cycloidal Drive, Custom PCB and LQR Control Algorithm.


mohamed-belal-10/can-motor-controller-node
CAN-connected closed-loop DC motor controller node — KiCad hardware (STM32F103, DRV8874, SN65HVD230) with an AS5600 encoder sub-PCB

tomqdev/tiltr
Repo for the ROS components of my latest attempt at an autonomous mobile manipulator

runger1101001/Magnetic_Encoders
Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

alientanya/stm32-and-as5600-breakout-board
stm32f102c8t6 breakout board with as5600 encoder and usb c connections