4 layers65.6 × 91.8 mm
2 layers20 × 20 mm
STM32 AS5600 I2
prashanjith-hash/PCB_Design-AS5600-STM- Size
- 20 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 54
- Pads
- 152
- Tracks, vias
- 63, 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Feb 2026
- Updated
- 25 Feb 2026
Overview
STM32 AS5600 I2 is an open-source printed circuit board by prashanjith-hash, from the prashanjith-hash/PCB_Design-AS5600-STM repository on GitHub. It is a 2-layer board of 20 × 20 mm with 34 parts on 54 nets, routed with 63 tracks and 8 vias.
It is built around the STM32F103C8T6, AS5600-ASOT and AMS1117-3.3. Its parts include 13 capacitors, 10 resistors, 3 ICs, 3 diodes and 2 connectors. It belongs with the STM32 boards of this library.
Main components
3
STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
AS5600-ASOT
SOIC-8-40℃~+125℃ 0°~360° 1.75mm 3.3V、5V 3.9mm 4.9mm 6.5mA I2C Magnetic rotary position sensor No SOIC-8 Position Sensors ROHSAdvanced Monolithic SystemsPosition Sensors
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R6 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13 |
| 2 | 30p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 120R | LI0603G121R-10:FB_LI0603G121R-10 | FB1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 8MHz | Crystal:Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AS5600-ASOT | AS5600-ASOT:SOIC127P600X175-8N | IC1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J1 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:Panasonic_EVQPUL_EVQPUC | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Amphenol_124019772112A | J4 |
Similar boards
- 2 layers35.7 × 33.1 mm
Breakout board
alientanya/stm32-and-as5600-breakout-board
stm32f102c8t6 breakout board with as5600 encoder and usb c connections
31 parts - 2 layers30.1 × 37.3 mm
STM32 AS5600 CHIPS
Sutej2907/PCB_DESIGN_STM_AS5600
STM32 BLUE PILL F103C8 AND MAGNETIC ENCODER AS5600 CHIPS INTEGRATED PCB
40 parts - 2 layers40 × 40 mm
- 2 layers18 × 27.7 mm
- 4 layers39.7 × 37 mm
- 4 layers55.5 × 55.5 mm
- 2 layers
Questions
How big is the STM32 AS5600 I2 PCB?
It measures 20 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32 AS5600 I2 use?
34 parts, built around the STM32F103C8T6, AS5600-ASOT and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32 AS5600 I2 KiCad files?
From the prashanjith-hash/PCB_Design-AS5600-STM repository on GitHub, at the commit this page was made from: the board is STM32_AS5600_I2.kicad_pcb and its schematic STM32_AS5600.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32 AS5600 I2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask prashanjith-hash before reusing the design.