

CurcuitV4
- Size
- 40 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 63
- Pads
- 274
- Tracks, vias
- 415, 340
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Jun 2025
- Updated
- 19 Oct 2026
Overview
CurcuitV4 is an open-source printed circuit board by banbatakumi, from the banbatakumi/BLDC repository on GitHub. It is a 2-layer board of 40 × 40 mm with 97 parts on 63 nets, routed with 415 tracks and 340 vias.
It is built around the AS5600-ASOT, DRV8300DPWR-MS and AP7375-33Y, with the CSTNE16M0V530000R0 and SMAJ13A among its other parts. Its parts include 30 resistors, 23 capacitors, 14 diodes, 7 ICs and 6 transistors. It belongs with the STM32 boards of this library.
Main components
5AS5600-ASOT
SOIC-8-40℃~+125℃ 0°~360° 1.75mm 3.3V、5V 3.9mm 4.9mm 6.5mA I2C Magnetic rotary position sensor No SOIC-8 Position Sensors ROHSAdvanced Monolithic SystemsPosition SensorsDRV8300DPWR-MS
TSSOP-20TSSOP-20 Gate Drivers ROHSMSKSEMIGate DriversAP7375-33Y
SOT-89-40℃~+125℃@(Tj) 1 2.1uA 3.3V 300mA 35mV@(10mA)、350mV@(100mA) 45V 85dB@(1kHz) Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCSTNE16M0V530000R0
SMD3213-3P-40℃~+85℃ 15pF 16MHz 40Ω SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsSMAJ13A
DO-214AC(SMA)-55℃~+150℃ 13V 15.9V 18.6A 1uA 21.5V 400W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
README
README.mdBLDC
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R6, R7, R10, R11, R13, R15, R18, R20, R22, R23, R25 |
| 12 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C6, C9, C10, C11, C12, C13, C22, C23, C25, C26 |
| 10 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R3, R5, R8, R26, R27, R28, R29, R30, R31 |
| 8 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3, C5, C8, C16, C17, C18, C19, C24 |
| 7 | D_Schottky | Diode_SMD:D_SOD-323_HandSoldering | D3, D6, D7, D8, D9, D10, D11 |
| 6 | 10 | Resistor_SMD:R_0603_1608Metric | R4, R9, R12, R14, R19, R21 |
| 6 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D4, D5, D12, D13 |
| 6 | Q_NMOS_DGS | 0-MyLibrary:SSM6K819R | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D2.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad_TopBottom | H1, H2, H3, H4 |
| 2 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4, C7 |
| 2 | 10m | Resistor_SMD:R_1206_3216Metric | R16, R24 |
| 2 | INA181 | Package_TO_SOT_SMD:SOT-23-6 | U4, U6 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | AP7375-3.3 | Package_TO_SOT_SMD:SOT-23 | U7 |
| 1 | AS5600-ASOT | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | CSTNE16M0V530000R0 | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | Conn_01x02 | Connector_Molex:Molex_SPOX_5268-02A_1x02_P2.50mm_Horizontal | J4 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Conn_01x03 | Connector_Molex:Molex_SPOX_5268-03A_1x03_P2.50mm_Horizontal | J2 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J3 |
| 1 | DRV8300DPWR | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | MCP9700x-ETT | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | SMAJ13A | Diode_SMD:D_SMA | D14 |
| 1 | STM32F303K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
More from banbatakumi/BLDC
3Similar boards
- 2 layers56 × 65 mm

- 2 layers38 × 65 mm

Spe sink
Scottapotamas/spe-marine-node
Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)
99 parts34MIT - 2 layers

- 4 layers66 × 61.8 mm

10X ESC V1
10x-Aero/ESC-Development-Board
A 6S AM32-compatible ESC built as a proof of concept for learning how to design an ESC from scratch
98 parts77 - 4 layers64.9 × 39.2 mm

HOLY ESC
0BAB1/HOLY_ESC
An open-source closed loop ESC PCB / Hardware platform. Based on a STM32F051 (Cortex M0 based) MCU. Tested using AM32 ESC software.
81 parts8 - 4 layers66 × 61.8 mm

STM32F051-ESC
Datnewlevel/STM32F051-ESC
Open-source three-phase ESC hardware designed in KiCad to study ESC operation
94 parts1 - 4 layers88 × 80 mm

Vetroplach board
jankrejci/vetroplach
An ultrasonic anemometer: KiCad PCB designs and ESP32-S3 firmware.
132 parts1 - 4 layers77.7 × 41 mm

Questions
How big is the CurcuitV4 PCB?
It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CurcuitV4 use?
97 parts, built around the AS5600-ASOT, DRV8300DPWR-MS, AP7375-33Y and CSTNE16M0V530000R0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CurcuitV4 KiCad files?
From the banbatakumi/BLDC repository on GitHub, at the commit this page was made from: the board is CurcuitV4/CurcuitV4.kicad_pcb and its schematic CurcuitV1/CurcuitV1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CurcuitV4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask banbatakumi before reusing the design.

