Skip to the content
2 layers21 × 10 mmEncoder AS5600L, the printed circuit board in 3D

Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

Size
21 × 10 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
12
Pads
38
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
22 Oct 2021
Updated
4 Jan 2026

Overview

Encoder AS5600L is an open-source printed circuit board by runger1101001, from the runger1101001/Magnetic_Encoders repository on GitHub. It is a 2-layer board of 21 × 10 mm with 13 parts on 12 nets.

Its parts include 3 resistors, 2 capacitors, 1 IC, 1 diode and 1 connector.

README

Encoder_SPI_SC60228_big/README.md

SC60228 magnetic angle sensor

Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

For use in motor control or robotics applications, the sensor measures the orientation (angle in the plane) of a nearby diametrically magnetized magnet.

That sounds more complicated than using it really is, so lets describe it another way:

  • attach the magnet to the axis of something that rotates
  • put the sensor near it
  • read angles with your Arduino
Back of boardFront of board
with SH 1.0 connector with sensor

Features

  • 3V to 5V operation
  • 12 bit accuracy, 4096 positions per revolution
  • SPI interface up to 10MHz
  • power indication LED (green, dim)

Datasheet of the sensor: https://semiment.com/wp-content/uploads/2021/04/SC60228_EN-VA1.0.pdf

Getting one

You may be able to buy some here:

I sell on Tindie

Or you could make one - it is open source, you will find gerber files and BOM in the repo, and design files for KiCad 6.

Usage

The sensor has to be precisely positioned near the magnet. The magnet should be precisely on-axis and in-plane (no wobble!). The sensor should be mounted with an air-gap of about 0.5mm to the magnet.

Taking the time to mount the magnet and sensor board carefully will improve the accuracy and smoothness of your readings.

The sensor has an SPI interface:

The SPI interface is available on a JST-SH 6-pin socket. Pre-made cables are available cheaply on AliExpress and other sources.

You may connect VCC to either 3.3V or 5V.

Connect the other lines (MOSI, MISO, CLK and CS) to the respective counterparts on your MCU board.

Note: The sensor board does not pull the CS line up.

Communications

SPI interface:

  • SPI Mode 1
  • MSB first
  • max 10MHz SPI clock

See datasheet for details, or use an existing software driver.

:warning: Note: cable length, shielding (or lack thereof) and environmental noise may limit performance to significantly less than the 10MHz maximum.

Software

The sensor can be used with any appropriate SPI driver.

The author uses it with Arduino-compatible MCU boards and the SimpleFOC library.

A driver for the sensor for Arduino and SimpleFOC can be found here: SimpleFOC drivers library

Physical dimensions

v1.0: 21 x 17 x 4mm (1.6mm PCB)

Cables

Pre-made JST SH 1.0 cables are available. When buying cables with two plugs, choose the type that is called "reverse connection" - where the pins on both ends of the cable have the same order.

Some links to compatible cables / breakout boards:

Parts

13
QtyValueFootprintReferences
32k2Resistor_SMD:R_0603_1608MetricR1, R2, R3
2MountingHole_PadMountingHole:MountingHole_2.2mm_M2_ISO7380_PadH1, H2
1100nF 10VCapacitor_SMD:C_0603_1608MetricC2
11uF 10VCapacitor_SMD:C_0603_1608MetricC1
1AS5600Lrunger:AS5600U2
1JST_SH_SM04BConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ1
1Robo_Logorunger:Robo_logo2L1
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1greenLED_SMD:LED_0805_2012MetricD1

The 12 most common of 13 parts.

More from runger1101001/Magnetic_Encoders

12
  • 2 layers131 × 111 mmEncoder I2C AS5600 Panel, the printed circuit board in 3D

    Encoder I2C AS5600 Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    741 parts11
  • 2 layers107 × 111 mmEncoder SPI AS5047P panel, the printed circuit board in 3D

    Encoder SPI AS5047P panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    491 parts11
  • 2 layers113 × 107 mmEncoder SPIABZ MT6816 Panel, the printed circuit board in 3D

    Encoder SPIABZ MT6816 Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    488 parts11
  • 2 layers113 × 103 mmEncoder SPIABZ MT6826S Panel, the printed circuit board in 3D

    Encoder SPIABZ MT6826S Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    488 parts11
  • 2 layers115 × 103 mmEncoder SPI KTH7812 Panel, the printed circuit board in 3D

    Encoder SPI KTH7812 Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    468 parts11
  • 2 layers107 × 111 mmEncoder SPI SC60228 panel, the printed circuit board in 3D

    Encoder SPI SC60228 panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    468 parts11
  • 2 layers96 × 41 mmEncoder SPI Panel v1 1, the printed circuit board in 3D

    Encoder SPI Panel v1 1

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    157 parts11
  • 2 layers63 × 41 mmEncoder SPI Panel, the printed circuit board in 3D

    Encoder SPI Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    105 parts11
  • 2 layers25 × 10 mmEncoder AEAT 8800 Q24, the printed circuit board in 3D

    Encoder AEAT 8800 Q24

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    24 parts11
  • 2 layers21 × 17 mmEncoder SPI MT6701 I2CAdapter, the printed circuit board in 3D

    Encoder SPI MT6701 I2CAdapter

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    21 parts11
  • 2 layers21 × 8 mmEncoder, the printed circuit board in 3D

    Encoder

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    17 parts11
  • 2 layers40 × 22 mmEncoder Distribution MA730 4x, the printed circuit board in 3D

    Encoder Distribution MA730 4x

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    14 parts11

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Encoder AS5600L PCB?

It measures 21 × 10 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Encoder AS5600L use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Encoder AS5600L KiCad files?

From the runger1101001/Magnetic_Encoders repository on GitHub, at the commit this page was made from: the board is Encoder_AS5600L/Encoder_AS5600L.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Encoder AS5600L design in my own project?

Its repository states no licence, so its author keeps all rights: ask runger1101001 before reusing the design.