Skip to the content
2 layers40 × 22 mmEncoder Distribution MA730 4x, the printed circuit board in 3D

Encoder Distribution MA730 4x

runger1101001/Magnetic_Encoders11

Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

Size
40 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
16
Pads
80
Tracks, vias
79, 28
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Oct 2021
Updated
4 Jan 2026

Overview

Encoder Distribution MA730 4x is an open-source printed circuit board by runger1101001, from the runger1101001/Magnetic_Encoders repository on GitHub. It is a 2-layer board of 40 × 22 mm with 14 parts on 16 nets, routed with 79 tracks and 28 vias.

Its parts include 7 connectors, 1 resistor and 1 diode.

README

Encoder_SPI_SC60228_big/README.md

SC60228 magnetic angle sensor

Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

For use in motor control or robotics applications, the sensor measures the orientation (angle in the plane) of a nearby diametrically magnetized magnet.

That sounds more complicated than using it really is, so lets describe it another way:

  • attach the magnet to the axis of something that rotates
  • put the sensor near it
  • read angles with your Arduino
Back of boardFront of board
with SH 1.0 connector with sensor

Features

  • 3V to 5V operation
  • 12 bit accuracy, 4096 positions per revolution
  • SPI interface up to 10MHz
  • power indication LED (green, dim)

Datasheet of the sensor: https://semiment.com/wp-content/uploads/2021/04/SC60228_EN-VA1.0.pdf

Getting one

You may be able to buy some here:

I sell on Tindie

Or you could make one - it is open source, you will find gerber files and BOM in the repo, and design files for KiCad 6.

Usage

The sensor has to be precisely positioned near the magnet. The magnet should be precisely on-axis and in-plane (no wobble!). The sensor should be mounted with an air-gap of about 0.5mm to the magnet.

Taking the time to mount the magnet and sensor board carefully will improve the accuracy and smoothness of your readings.

The sensor has an SPI interface:

The SPI interface is available on a JST-SH 6-pin socket. Pre-made cables are available cheaply on AliExpress and other sources.

You may connect VCC to either 3.3V or 5V.

Connect the other lines (MOSI, MISO, CLK and CS) to the respective counterparts on your MCU board.

Note: The sensor board does not pull the CS line up.

Communications

SPI interface:

  • SPI Mode 1
  • MSB first
  • max 10MHz SPI clock

See datasheet for details, or use an existing software driver.

:warning: Note: cable length, shielding (or lack thereof) and environmental noise may limit performance to significantly less than the 10MHz maximum.

Software

The sensor can be used with any appropriate SPI driver.

The author uses it with Arduino-compatible MCU boards and the SimpleFOC library.

A driver for the sensor for Arduino and SimpleFOC can be found here: SimpleFOC drivers library

Physical dimensions

v1.0: 21 x 17 x 4mm (1.6mm PCB)

Cables

Pre-made JST SH 1.0 cables are available. When buying cables with two plugs, choose the type that is called "reverse connection" - where the pins on both ends of the cable have the same order.

Some links to compatible cables / breakout boards:

Parts

14
QtyValueFootprintReferences
4Conn_01x08_MountingPinConnector_JST:JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_VerticalJ3, J4, J5, J6
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_ISO7380_PadH1, H2, H3, H4
2Conn_01x10_MountingPinConnector_JST:JST_SH_SM10B-SRSS-TB_1x10-1MP_P1.00mm_HorizontalJ1, J2
11kResistor_SMD:R_0402_1005MetricR1
1Conn_01x06_MountingPinConnector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_VerticalJ7
1LOGOrunger:Robo_logo2G***
1greenLED_SMD:LED_0402_1005MetricD1

More from runger1101001/Magnetic_Encoders

12
  • 2 layers131 × 111 mmEncoder I2C AS5600 Panel, the printed circuit board in 3D

    Encoder I2C AS5600 Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    741 parts11
  • 2 layers107 × 111 mmEncoder SPI AS5047P panel, the printed circuit board in 3D

    Encoder SPI AS5047P panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    491 parts11
  • 2 layers113 × 107 mmEncoder SPIABZ MT6816 Panel, the printed circuit board in 3D

    Encoder SPIABZ MT6816 Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    488 parts11
  • 2 layers113 × 103 mmEncoder SPIABZ MT6826S Panel, the printed circuit board in 3D

    Encoder SPIABZ MT6826S Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    488 parts11
  • 2 layers115 × 103 mmEncoder SPI KTH7812 Panel, the printed circuit board in 3D

    Encoder SPI KTH7812 Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    468 parts11
  • 2 layers107 × 111 mmEncoder SPI SC60228 panel, the printed circuit board in 3D

    Encoder SPI SC60228 panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    468 parts11
  • 2 layers96 × 41 mmEncoder SPI Panel v1 1, the printed circuit board in 3D

    Encoder SPI Panel v1 1

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    157 parts11
  • 2 layers63 × 41 mmEncoder SPI Panel, the printed circuit board in 3D

    Encoder SPI Panel

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    105 parts11
  • 2 layers25 × 10 mmEncoder AEAT 8800 Q24, the printed circuit board in 3D

    Encoder AEAT 8800 Q24

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    24 parts11
  • 2 layers21 × 17 mmEncoder SPI MT6701 I2CAdapter, the printed circuit board in 3D

    Encoder SPI MT6701 I2CAdapter

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    21 parts11
  • 2 layers21 × 8 mmEncoder, the printed circuit board in 3D

    Encoder

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    17 parts11
  • 2 layers21 × 10 mmEncoder AS5600L, the printed circuit board in 3D

    Encoder AS5600L

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    13 parts11

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Encoder Distribution MA730 4x PCB?

It measures 40 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Encoder Distribution MA730 4x use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Encoder Distribution MA730 4x KiCad files?

From the runger1101001/Magnetic_Encoders repository on GitHub, at the commit this page was made from: the board is Encoder_Distribution_MA730_4x/Encoder_Distribution_MA730_4x.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Encoder Distribution MA730 4x design in my own project?

Its repository states no licence, so its author keeps all rights: ask runger1101001 before reusing the design.