
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers139.7 × 134.1 mm

- 4 layers85.1 × 50.2 mm

AuroraF4
aleko-khomasuridze/AuroraF4
AuroraF4 is a high-performance development board based on the STM32F407VGT6 microcontroller, featuring peripherals like I2C, SPI, UART, and GPIO for versatile applications.
76 parts3 - 2 layers177 × 91.6 mm

Power Charg AUTO 12V C
Aleksei327/STM32G474-Power-Charger
Experimental STM32G474-based high-current battery charger and programmable synchronous buck converter. KiCad hardware and STM32CubeIDE firmware.
160 parts3 - 2 layers92.9 × 46.9 mm

- 2 layers91.1 × 98.6 mm

- 4 layers47 × 21.6 mm

Rotini Hardware
AlfredoSystems/Rotini-Hardware
📖 Documentation: https://www.alfredosys.com/Rotini-Hardware/ (pinout, power limits, flashing ExpressLRS, first Arduino upload)
116 parts3MIT - 2 layers100 × 100 mm

Tt06-vga opamp
algofoogle/tt06-grab-bag
Assortment of analog and digital stuff for TT06
119 parts3Apache-2.0 - 2 layers90 × 100 mm

Meshcore NaIon
Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.
154 parts3 - 4 layers80 × 50 mm

Sniff detector
AllenNeuralDynamics/harp.device.sniff-detector
0382: Signal conditioning board for an implanted thermistor
114 parts3MIT - 2 layers38.5 × 23 mm

- 2 layers68.6 × 53.4 mm

- 4 layers81.7 × 61 mm

Pmod interface board
alpyen/zynq-gbcartreader
Embedded Software Development project to read & write GameBoy cartridges.
31 parts3 - 2 layers90 × 100 mm

Ecse controls flight computer
ALTAIR-McGill-x-UVictoria/HAB-Control-Flight-Computer
ECSE Control Capstone Team- High Altitude Balloon Flight Computer
34 parts3MIT - 2 layers40 × 40 mm

NeoBoard
alvaroferran/NeoBoard
Robotics controller shield for the NanoPi Neo Air with two DC motor drivers and a LiPo battery charger
73 parts3 - 2 layers85.6 × 54 mm

BusinessCard
alvaroferran/PrintedContactBoard
A PCB business card that transmits contact information using NFC, QR and plain English
4 parts3 - 2 layers50.8 × 61 mm

Nui
alvarop/nui
Nui is an IR(evntually also BLE) controlled volume controller for analog audio. It sits between your audio source and speakers and can amplify or reduce the volume using IR commands (and evntually BLE).
53 parts3MIT - 4 layers35 × 40 mm

5V 10A Buck
AMAR124595/5V_10A-Buck-converter
A 4 layer PCB of the 5V_10A buck convertor using TPS51397ARJER IC
34 parts3 - 2 layers47 × 81.5 mm

- 6 layers159.5 × 96.5 mm

- 2 layers38 × 68 mm

Drone board
Aminekachkach/Drone_Lumineux
Developed by me and my colleague Bilal MARECAR, during our last year of our studies at engineering school
21 parts3 - 2 layers90 × 94 mm

- 2 layers97.3 × 58.6 mm

- 2 layers77.5 × 57.5 mm

CNC FPGA Driver PCB
AmZu1212/CNC-FPGA
FPGA-driven CNC / pen-plotter control system built around the AMD/Xilinx Zynq-7000 ZedBoard. The machine uses a ballpoint pen as its toolhead and draws 2D paths on paper by coordinating X/Y motion and pen lift on the Z…
21 parts3 - 2 layers35 × 49 mm

Anavi knob-1
AnaviTechnology/anavi-knob-1
ANAVI Knob 1 is a mini mechanical keyboard with a clickable rotary encoder, USB-C, RP2040 microcontroller and I2C slot for an OLED display.
8 parts3