

Rota Pi
A custom built sim race steering wheels powered by a Rasp Pico.
- Size
- 90 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 41
- Pads
- 132
- Tracks, vias
- 124, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jun 2025
- Updated
- 28 Jul 2025
Overview
Rota Pi is an open-source printed circuit board by AmmarSyamil, from the AmmarSyamil/Rota_Pi repository on GitHub. It is a 2-layer board of 90 × 94 mm with 20 parts on 41 nets, routed with 124 tracks and 0 vias.
It belongs with the RP2040 boards of this library.
README
README.md
ROTA_Pi
ROTA_Pi is a custom built sim race steering wheel powered by a Raspberry Pi Pico, designed for usability and ease of setup.
It features all peripheral that is needed in sim racing (DRS, ADS, change gears, POV shift, and much more) and the additional paddle behind the wheel for both the throttle and braking without the need of external pads for it.
This project combines embedded hardware, custom 3D design, and custom styling all built from the ground up using custom PCBs, sensors system, and a 3D-printed enclosure modeled in FreeCAD.
I also plan to add BMW M series badge at the middle of the wheel for accessories (not the real one of course and it isn’t there on the model yet). It connected via a USB-C to USB-B.
Background
Lately, I started into cars stuff and that’s make me wanna play car game, like F1 25, Assetto Corsa, or even Forza Horizon.
But my money is already used for buying laptop (duhh) so I couldn’t afford to buy dedicated race sim.
Other than that, I also want a simple race sim without lots of setup and place taken. Because of that, I made this project that target usability.
I used pinhole in the PCB instead of direct of it, because it is easier to repair and fine tune.
Also I print the PCB in my local shop because there’s MoQ JLCPCB and my PCB isn’t complex.

For the 3D model, I printed in Filamen.com of Indonesia, because there’s no #print-legion in Indonesia.


For the other parts I ordered from Tokopedia (an online marketplace in Indonesia), because Temu and Aliexpress can’t send to Indonesia.
You can search the BOM for the total bill.
🔧 Specs
Main process device:
- Raspberry Pi Pico (RP2040)
Peripheral:
- Button: R13-507
- Rotary Potentiometer: 10K ohm version
- Rotary Encoder: EC-11
- Hall sensor: SS49E
Other:
- Magnet: Neodymium 8x3mm
- Display: 0.91" 128x32 OLED display
- Power and data cable: Vention USB-C to USB-B
Credits & Attribution
Clamp model made by: Studio Space Dust from Printables website
- Webs: https://www.printables.com/model/730655-c-clamp-with-swappable-clamp-ends/files
- License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
http://creativecommons.org/licenses/by-nc-sa/4.0/
BOM
| # | Name | Unit Price (IDR) | Quantity | Total Price (IDR) | Total Price (USD) | Tokopedia Link | From |
|---|---|---|---|---|---|---|---|
| 1 | Rasp Pico | Rp65,000 | 1 | Rp65,000 | $3.96 | Link | Tokopedia |
| 2 | Tactile button | Rp2,755 | 8 | Rp22,040 | $1.34 | Link | Tokopedia |
| 3 | Wire | Rp2,850 | 3 | Rp8,550 | $0.52 | Link | Tokopedia |
| 4 | Hall sensor (SS493) | Rp1,805 | 2 | Rp3,610 | $0.22 | Link | Tokopedia |
| 5 | Rotary potentiometer | Rp2,375 | 1 | Rp2,375 | $0.14 | Link | Tokopedia |
| 6 | Display | Rp20,900 | 1 | Rp20,900 | $1.27 | Link | Tokopedia |
| 7 | Rotary encoder (d shaft) | Rp6,175 | 3 | Rp18,525 | $1.13 | Link | Tokopedia |
| 8 | Magnet | Rp16,360 | 1 | Rp16,360 | $1.00 | Link | Tokopedia |
| 9 | Spring | Rp1,425 | 2 | Rp2,850 | $0.17 | Link | Tokopedia |
| 10 | Cable | Rp49,000 | 1 | Rp49,000 | $2.99 | Link | Tokopedia |
| 11 | Glue | Rp20,900 | 1 | Rp20,900 | $1.27 | Link | Tokopedia |
| 12 | Solder | Rp142,100 | 1 | Rp142,100 | $8.67 | Link | Tokopedia |
| 13 | Timah solder | Rp21,850 | 1 | Rp21,850 | $1.33 | Link | Tokopedia |
| 14 | Heat shrink tube | Rp1,330 | 1 | Rp1,330 | $0.08 | Link | Tokopedia |
| 15 | Heat gun | Rp48,260 | 1 | Rp48,260 | $2.94 | Link | Tokopedia |
| 16 | BMW m series badge | Rp19,000 | 1 | Rp19,000 | $1.16 | Link | Tokopedia |
| 17 | Pin header | Rp855 | 2 | Rp1,710 | $0.10 | Link | Tokopedia |
| 18 | m3 + nut washer (main case) | Rp22,610 | 8 | Rp180,880 | $11.02 | Link | Tokopedia |
| 19 | m2 10mm (paddle) | Rp2,610 | 2 | Rp5,220 | $0.32 | Link | Tokopedia |
| 20 | m2 20mm (handle middle thumb) | Rp3,325 | 2 | Rp6,650 | $0.41 | Link | Tokopedia |
| 21 | washer m2 | Rp190 | 4 | Rp760 | $0.05 | Link | Tokopedia |
| 22 | nut m2 | Rp950 | 4 | Rp3,800 | $0.23 | Link | Tokopedia |
| 23 | 3D printing | Rp594,400 | 1 | Rp594,400 | $36.24 | — | Filamen.com |
| 24 | PCB+delivery | Rp109,500 | 1 | Rp109,500 | $6.67 | — | SpectraPCB |
| 25 | Deliver tokopedia cost | Rp116,100 | 1 | Rp116,100 | $7.08 | — | |
| Total | Rp1,785,225 | $108.80 |
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SW_Push | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm_Relief | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M2_1, M2_2, M2_3, M2_4 |
| 3 | RotaryEncoder_Switch | KICAD FOOTPRINT EXTRA:Connector Wire_ Solder Wire-0.5sqmm 1x05 P4.6mm D0.9mm OD2.1mm Relief | SW9, SW10, SW11 |
| 2 | ~ | Connector_Wire:SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm_Relief | ME1, ME2 |
| 1 | R_Potentiometer | Connector_Wire:SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm_Relief | RV1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | ~ | Connector_Wire:SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm_Relief | DG1 |
Similar boards
- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm

FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Rota Pi PCB?
It measures 90 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rota Pi use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rota Pi KiCad files?
From the AmmarSyamil/Rota_Pi repository on GitHub, at the commit this page was made from: the board is KiCAD/KiCAD.kicad_pcb and its schematic KiCAD/KiCAD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rota Pi design in my own project?
Its repository states no licence, so its author keeps all rights: ask AmmarSyamil before reusing the design.