Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers43.1 × 97.7 mmAnavi pico protoboard, the printed circuit board in 3D

    Anavi pico protoboard

    AnaviTechnology/anavi-pico-protoboard

    Simple prototyping board for Raspberry Pi Pico designed using KiCad

    14 parts3
  • 2 layers30 × 36 mmAnavi tb6612, the printed circuit board in 3D

    Anavi tb6612

    AnaviTechnology/anavi-tb6612

    ANAVI TB6612 Breakout Board is a simple prototyping board for Toshiba TB6612FNG driver IC for dual DC motor.

    10 parts3
  • 4 layers96 × 42.2 mmCANDrive, the printed circuit board in 3D

    CANDrive

    Andreasdahlberg/CANDrive

    CANDrive is a brushed DC Motor Controller controlled via a CAN interface.

    80 parts3GPL-3.0
  • 4 layers140 × 140 mmPCU, the printed circuit board in 3D

    PCU

    Andresse2020/NovaDrone-Hardware

    Complete electronic system design for a high-performance quadcopter drone, developed entirely from scratch. Includes power distribution, motor control, flight stabilization, sensor integration, and communication…

    760 parts3
  • 2 layers80.8 × 27.7 mmMazda auxmod pcb, the printed circuit board in 3D

    Mazda auxmod pcb

    andrewandneil/mazda-auxmod

    A circuit board and code for adding AUX In to Mazda Radios

    33 parts3GPL-3.0
  • 2 layers24 × 33 mmZifi ESP32 Zero Adapter, the printed circuit board in 3D

    Zifi ESP32 Zero Adapter

    andrewinsidelazarev/ZiFi-ESP32-S3-Zero

    Переходник устанавливает модуль Waveshare ESP32-S3-Zero вместо ESP-01/ESP-01S. ESP32-S3-Zero расположен сверху, а снизу платы выходит штекер 4×2 с шагом 2,54 мм и физической ориентацией ESP-01.

    2 parts3MIT
  • 2 layers158 × 250 mmDigisax, the printed circuit board in 3D

    Digisax

    AndrewJ-25/Digisax

    ESP32 controlled wind synth

    90 parts3
  • 2 layers70 × 48.2 mmHF BPF, the printed circuit board in 3D

    HF BPF

    andriy-bilynskyy/HF-BPF

    Short wave BPF HW design

    27 parts3MIT
  • 2 layers120 × 100 mmOnstep, the printed circuit board in 3D

    Onstep

    andshn/OnStep_STM32_PCB

    This is a PCB for OnStep, designed for 1455N1201 case. In the board use XLR connectors for steper drivers. The DB9 connector use for the hand controller.

    137 parts3CC-BY-SA-4.0
  • 4 layers101.6 × 147.3 mmKarabas go, the printed circuit board in 3D

    Karabas go

    andykarpov/karabas-go-pcb

    Karabas-Go PCB

    311 parts3
  • 2 layers58.4 × 50.8 mmCatDemoProject, the printed circuit board in 3D

    CatDemoProject

    ANG13T/pcb-soldering-workshop

    Slideshow, KiCad PCB Files, and Assets for the PCB and Soldering Workshop

    6 parts3
  • 2 layers91.9 × 81.1 mmRgb cat, the printed circuit board in 3D

    Rgb cat

    ANG13T/rgb-cat

    A cat-shaped RGB PCB badge to teach the basics of soldering 😺

    14 parts3MIT
  • 2 layers93.8 × 39.5 mmControl, the printed circuit board in 3D

    Control

    anneosaur/paper-sunshine-clock

    A unique clock made with thermochromic paint

    58 parts3
  • 4 layers17.6 × 40 mmPandora mcu cc1352p7, the printed circuit board in 3D

    Pandora mcu cc1352p7

    anobli/pandora-hw

    Open hardware designs for user-controlled smart home devices. Zephyr RTOS + Thread/WiFi connectivity. No cloud dependency, no vendor lock-in.

    58 parts3CERN-OHL-S-2.0
  • 2 layers25 × 20 mmKicon kicad, the printed circuit board in 3D

    Kicon kicad

    Anool/kicon2019

    FreeCAD tutorial and workshop at KiCon 2019, Chicago

    3 parts3GPL-3.0
  • 2 layers152 × 77 mmKumanda, the printed circuit board in 3D

    Kumanda

    Antalya-ISAS/tcgrida-mechanical

    tcGrida's remote-control codes, vehicle codes, and circuit designs.

    38 parts3GPL-3.0
  • 2 layers16 × 16 mmRGB CONN CHG DIN6 ST, the printed circuit board in 3D

    RGB CONN CHG DIN6 ST

    antarcticlion/RGB_UNICONV

    PCBs for Retro computer display connector convertion.

    9 parts3
  • 2 layers76 × 113.8 mmEu sensor board, the printed circuit board in 3D

    Eu sensor board

    antevens/sladdseg

    Smart Wallplate/Switch for IKEA Bilresa E2490

    20 parts3
  • 4 layers50 × 26.5 mmEnvironment sensor sip baseboard, the printed circuit board in 3D

    Environment sensor sip baseboard

    antmicro/environment-sensor-myra-baseboard

    This repository contains open hardware design files for Antmicro's Environment Sensor Board variant which includes the MYRA SiP as well as temperature, pressure and humidity sensors.

    59 parts3Apache-2.0
  • 2 layers126.6 × 99.2 mmDefiant, the printed circuit board in 3D

    Defiant

    antoniusnaumann/defiant-keyboard

    A wireless, low-profile spit keyboard using Gateron KS-33 switches and a Seedstudio Xiao MCU

    55 parts3
  • 2 layers65 × 56.5 mmRf noise antenna v2, the printed circuit board in 3D

    Rf noise antenna v2

    antonjan/rf_noise_antenna

    This repository will have all the details for the active antenna board for Rasdpberry PI

    47 parts3GPL-3.0
  • 2 layers60 × 37 mmHydrabus shield template, the printed circuit board in 3D

    Hydrabus shield template

    AnttiNykanen/hydrabus-shield-template-kicad

    HydraBus shield template for KiCad

    4 parts3
  • 2 layers80.7 × 34.1 mm5V regulated safe power supply, the printed circuit board in 3D

    5V regulated safe power supply

    anujthakur512/Buck-Converter-5V

    I build a Buck Converter (5V) using IC LM2596 on KiCad as my 1st project of learning PCB Designing.

    16 parts3MIT
  • 2 layers104 × 116 mmCharger, the printed circuit board in 3D

    Charger

    anwa/esphome-r4875g1-3phase-charger

    ESPHome-based 3-phase battery charger controller for three Huawei R4875G1 rectifier modules with CAN bus, TFT display, rotary encoder, MQTT, Home Assistant and standalone blackstart support.

    18 parts3MIT