
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

tcGrida's remote-control codes, vehicle codes, and circuit designs.
Kumanda is an open-source printed circuit board by Antalya-ISAS, from the Antalya-ISAS/tcgrida-mechanical repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 152 × 77 mm with 38 parts on 91 nets, routed with 604 tracks and 95 vias.
It is built around the RJ45. Its parts include 4 resistors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
tcGrida is an explorer ROV that is capable of long duration and long-distance dives, autonomous emergency easy-surface*, live video feed, 4K@60 video recording, high-pressure durable and waterproof design with a wired, trustable and stable connection.
*: A solution that prevents your vehicle from getting lost in the water when the connection is lost and makes it get back to the surface autonomously.
Instagram: https://instagram.com/antalya.isas
LinkedIn: https://linkedin.com/company/antalya-isas
YouTube: https://www.youtube.com/channel/UCWZvgA6EhvlmvoRbStbpwaQ
Website: https://antalyaisas.com
Discord Server: https://discord.gg/peCKe2drMV
E-mail: info@antalyaisas.com
Contact Form: https://antalyaisas.com/iletisim.html
Address: Molla Yusuf Mah. Hürriyet Cad. No: 25 Konyaaltı/Antalya, Türkiye
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | DHT1, POT1, POT2, Switch1, Switch2, VIB1, VIB2 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 3 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | AV1, CAN_H1, CAN_L1 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | CAN_Bus2, CAN_H_L1 |
| 2 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | Bluetooth1, OLED_I2C1 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | 3.3V1, GND2 |
| 2 | Conn_01x05 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | Joy1, Joy2 |
| 2 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | Analog1, PWM1 |
| 2 | Conn_01x18 | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | 5V1, GND1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | USB_kod1 |
| 1 | Conn_01x06 | analog_cam:Analog-cam | AV_conv1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | CAN_Bus1 |
| 1 | MEGA_PRO_EMBED_CH340G___ATMEGA2560 | MODULE_MEGA_PRO_EMBED_CH340G_:_ATMEGA2560 | U1 |
| 1 | RJ45 | Connector_RJ:RJ45_Ninigi_GE | RJ45 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | screw_term1 |
| 1 | USB_A | Connector_USB:USB_A_CONNFLY_DS1095-WNR0 | J1 |

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project


Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems

mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
It measures 152 × 77 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Antalya-ISAS/tcgrida-mechanical repository on GitHub, at the commit this page was made from: the board is remote-control/kumanda_pcb/kumanda/kumanda.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).