
Hexapod PCB KiCad Project
Aecert-Robotics/Hexapod
A hexapod powered by Arduino using hobby servos

ECSE Control Capstone Team- High Altitude Balloon Flight Computer
Ecse controls flight computer is an open-source printed circuit board by ALTAIR-McGill-x-UVictoria, from the ALTAIR-McGill-x-UVictoria/HAB-Control-Flight-Computer repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 100 mm with 34 parts on 84 nets, routed with 111 tracks and 14 vias.
It is built around the DEV-16771. Its parts include 14 capacitors, 7 connectors, 6 ICs and 2 resistors.
High Altitude Balloon Flight Computer
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C6, C7, C9, C11, C13 |
| 7 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C5, C8, C10, C12, C14 |
| 7 | 691137710002 | library-footprints:691137710002-connector | J1, J2, J3, J4, J5, J6, J7 |
| 3 | 4754 | imu:MODULE_4754 | U2, U3, U4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | DEV-16771 | teensy:MODULE_DEV-16771 | U1 |
| 1 | speaker | library-footprints:speaker | LS1 |
| 1 | ~ | library-footprints:altimeter | U6 |
| 1 | ~ | library-footprints:temperature-amplifier | U5 |
The 30 most common of 34 parts.

Aecert-Robotics/Hexapod
A hexapod powered by Arduino using hobby servos


rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro

Big-Red-Sat/High-Altitude-Student-Platform
This repository contains the hardware designs, data, and analysis of perovskite solar cells on high altitude balloons

NeverNotJohn/CSUF-NASA-USLI-2026
California State University Fresno (CSUF) Github for the 2025-2026 NASA USLI Competition

IEEE-Robotics-Club/MSU-NASA-Minds-2023
The code repository for the 2023 MSU NASA Minds competition

letrend/UVen
UV irradiation system for enhanced photo-activation in living cells

It measures 90 × 100 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the DEV-16771. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ALTAIR-McGill-x-UVictoria/HAB-Control-Flight-Computer repository on GitHub, at the commit this page was made from: the board is flight-computer-hardware/flight-computer-pcb/ecse_controls_flight_computer.kicad_pcb and its schematic flight-computer-hardware/flight-computer-pcb/ecse_controls_flight_computer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).