

AmigaPCI 68040
MC68040 Local Bus Card for the AmigaPCI
- Size
- 159.5 × 96.5 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 136
- Nets
- 363
- Pads
- 1,280
- Tracks, vias
- 4,520, 563
- Pours
- 2,217
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Nov 2025
- Updated
- 8 Oct 2026
Overview
AmigaPCI 68040 is an open-source printed circuit board by AmigaPCI, from the AmigaPCI/AmigaPCI-LBC040 repository on GitHub. It is a 6-layer board of 159.5 × 96.5 mm with 136 parts on 363 nets, routed with 4,520 tracks and 563 vias.
It is built around the ICE40HX1K-VQ100, ICE40HX4K-TQ144 and 74LVC245AD, with the 74LVC1G125, 74LVC244 and W25X20CLSNIG among its other parts. Its parts include 74 capacitors, 23 resistors, 23 ICs, 12 connectors and 1 crystal. It belongs with the FPGA and CPLD boards of this library.
Main components
6ICE40HX1K-VQ100
TQFP-100(14x14)-40℃~+100℃ 1.14V~1.26V 1280 160 65536bit 72 iCE40 HX TQFP-100(14x14) Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)ICE40HX4K-TQ144
TQFP-144(20x20)-40℃~+100℃ 1.14V~1.26V 107 3520 440 81920bit iCE40 HX TQFP-144(20x20) Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)74LVC245AD
SOIC-20-300mil-40℃~+125℃ 1 1.65V~3.6V 2.9ns@3.3V,50pF 24mA 40uA 74LVC 8 Bidirectional Schmitt trigger Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver74LVC1G125
SOT-353SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core ElecBuffers, Drivers, Receivers, Transceivers74LVC244
TSSOP-20Buffers, Drivers, Receivers, TransceiversWuxi I-core ElecW25X20CLSNIG
SOIC-8-40℃~+85℃ 100,000 cycles 104MHz 120ms@(32KB) 1uA 2.3V~3.6V 20 Years 2Mbit 400us SPI SOIC-8 NOR FLASH ROHSWinbond ElecNOR FLASH
README
README.md
This repo contains the MC68040 local bus card project for the AmigaPCI. It supports up to 128MB of fast ram.
The documentation at the AmigaPCI project should be reviewed before building this project. Technical information on the AmigaPCI Local Bus Port can be found in the AmigaPCI Hardware Reference Guide
Parts
136| Qty | Value | Footprint | References |
|---|---|---|---|
| 65 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C122, C123, C124, C125 +49 |
| 13 | 74LVC245 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U101, U102, U103, U104, U105, U106, U107, U108, U109, U110, U116, U117, U203 |
| 11 | 22R | Resistor_SMD:R_0603_1608Metric | R104, R111, R112, R113, R114, R115, R116, R117, R118, R119, R120 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R100, R101, R102, R103, R106, R107, R400, R401 |
| 7 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C113, C114, C115, C116, C117, C135, C138 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R108, R109 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C132, C134 |
| 2 | 2k7 | Resistor_SMD:R_0603_1608Metric | R105, R110 |
| 2 | 74LVC1G125 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U113, U115 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad | H1, H2 |
| 2 | SDRAM(16Mx32) | AmigaPCI:TSOP-II-86 | U401, U402 |
| 2 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | CN111, CN400 |
| 2 | W25X20CLSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U400F1, U409F2 |
| 1 | 74LVC244 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U112 |
| 1 | 80MHz | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X100 |
| 1 | CLKEN | TestPoint:TestPoint_Pad_D1.0mm | J6 |
| 1 | DIN41612_03x50 | AmigaPCI:DIN41612_C_3x50_Male_Vertical_THT | CN100 |
| 1 | ICE40HX1K-VQ100 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U400 |
| 1 | ICE40HX4K-TQ144 | Package_QFP:LQFP-144_20x20mm_P0.5mm | U111 |
| 1 | LOGO | AmigaPCI:Mug | G*** |
| 1 | MC68040 | AmigaPCI:PGA179 | U100 |
| 1 | MMU/CACHE | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J101 |
| 1 | RAMCLK | TestPoint:TestPoint_Pad_D1.0mm | J7 |
| 1 | SNOOP | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J100 |
| 1 | _CAS | TestPoint:TestPoint_Pad_D1.0mm | J4 |
| 1 | _CS0 | TestPoint:TestPoint_Pad_D1.0mm | J1 |
| 1 | _CS1 | TestPoint:TestPoint_Pad_D1.0mm | J2 |
| 1 | _RAS | TestPoint:TestPoint_Pad_D1.0mm | J3 |
| 1 | _WE | TestPoint:TestPoint_Pad_D1.0mm | J5 |
Similar boards
- 6 layers304.8 × 243.8 mm

- 4 layers134.4 × 58 mm

- 2 layers170 × 145 mm

Nascom ng
cartheur/M6809-multicomputer
Systems-matching the requirements of novel-ideal in metal to architecture
120 parts1MIT - 2 layers

ISA FPGA
robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.
106 parts78 - 4 layers99.1 × 88.9 mm

- 2 layers200 × 115 mm

Musicbrain busboard v2
MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it
94 partsMIT - 4 layers61.4 × 37 mm

- 4 layers66 × 61 mm

Questions
How big is the AmigaPCI 68040 PCB?
It measures 159.5 × 96.5 mm and has 6 copper layers, 1.6 mm thick.
What parts does the AmigaPCI 68040 use?
136 parts, built around the ICE40HX1K-VQ100, ICE40HX4K-TQ144, 74LVC245AD and 74LVC1G125. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AmigaPCI 68040 KiCad files?
From the AmigaPCI/AmigaPCI-LBC040 repository on GitHub, at the commit this page was made from: the board is KiCAD/AmigaPCI-LBC040-REV60/AmigaPCI 68040.kicad_pcb and its schematic KiCAD/AmigaPCI-LBC040-REV60/AmigaPCI 68040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AmigaPCI 68040 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AmigaPCI before reusing the design.
