Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers120 × 67 mmSilvia pid board, the printed circuit board in 3D

    Silvia pid board

    haydenridd/silvia-pid-board

    The following outlines: - Board circuit design - Hookup/wiring guide - Board mounting - BOM/Fabrication info

    39 parts10MIT
  • 2 layers94.5 × 55 mmVcf1, the printed circuit board in 3D

    Vcf1

    hermflink/3320VCF

    Kicad project files of a CEM/AS3320 based VCF

    79 parts10GPL-3.0
  • 2 layers36 × 32 mmFV1-usbprog, the printed circuit board in 3D

    FV1-usbprog

    hexeguitar/FV1_EEprog

    FV1 EEPROM Programmer

    8 parts10MIT
  • 2 layers116 × 40 mmLetterboxsensor, the printed circuit board in 3D

    Letterboxsensor

    hierle/letterbox-sensor-v2

    LoRa / LoRaWan letterbox sensor v2

    33 parts10GPL-3.0
  • 2 layers30 × 43 mmCurrentmeter, the printed circuit board in 3D

    Currentmeter

    hnz1102/mini-current-meter

    Mini Current Meter using INA228A ultra-precise digital power monitor

    40 parts10
  • 2 layersDevBoard, the printed circuit board in 3D

    DevBoard

    hsc-latte/hs32core

    It's a processor

    9 parts10Apache-2.0
  • 2 layers66.5 × 26.4 mmNTAG I2C Eval Board, the printed circuit board in 3D

    NTAG I2C Eval Board

    Hugoyhu/NTAG-I2C-Eval-Board

    This is a small board built to use the NXP NTAG I2C Plus 2K, with supporting hardware and a Class 4 PCB Antenna.

    5 parts10
  • 2 layers284 × 139 mmPteropus, the printed circuit board in 3D

    Pteropus

    hulahermit/pteropus_keyboard

    A Miryoku inspired 36-key non-split keyboard

    100 parts10
  • 2 layers145.4 × 100.5 mmESPNOWctrl, the printed circuit board in 3D

    ESPNOWctrl

    hxelec/antc3

    150g Antweight Combat Robot project (Hirex)

    12 parts10GPL-3.0
  • 2 layers60 × 50 mmWactrollerLogic, the printed circuit board in 3D

    WactrollerLogic

    hykilpikonna/OpenHardware

    Open-sourced Hardware Experimentation <3

    36 parts10
  • 2 layers20.5 × 46.5 mmNiceTOTP, the printed circuit board in 3D

    NiceTOTP

    ICantMakeThings/NiceTOTP

    Air Gapped (except configuration) TOTP Hardware key, using the nRF52840.

    7 parts10MIT
  • 4 layers68.6 × 53.3 mm101 PCB, the printed circuit board in 3D

    101 PCB

    ICRS/101

    The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.

    89 parts10CC-BY-4.0
  • 4 layers272.5 × 107.4 mmCorne light, the printed circuit board in 3D

    Corne light

    idank/keyboards

    This repo contains pcb and 3d files for keyboards. The keyboards are adaptations of popular open source keyboards with a variety of changes.

    261 parts10CC-BY-SA-4.0
  • 2 layers47.5 × 85.7 mmPixel, the printed circuit board in 3D

    Pixel

    idlehandsdev/pov_ornament

    A Persistence of Vision Christmas Ornament

    42 parts10GPL-3.0
  • 2 layers78 × 124 mmNMEA2000Module, the printed circuit board in 3D

    NMEA2000Module

    ieb/EngineMonitor

    SenseESP based Engine Monitor for VolvoPenta D2-40

    46 parts10
  • 2 layers56.5 × 53.3 mmCompressorController, the printed circuit board in 3D

    CompressorController

    ieb/fridgeController

    Secop or Danfoss 12v fridge compressor controller

    21 parts10
  • 2 layers92.4 × 91 mmDiodeORLogic, the printed circuit board in 3D

    DiodeORLogic

    ijnekenamay/Passive_modules

    This is a passive outboard device for modular synths and can be used a "bare"PCB.

    23 parts10
  • 2 layers38.1 × 109.2 mmLesScope, the printed circuit board in 3D

    LesScope

    ImoogDi/LesScope

    Arduino based Dual Channel Scope for eurorack-modular synths

    56 parts10
  • 2 layers211.2 × 113 mmLower case, the printed circuit board in 3D

    Lower case

    ImYourHuckleberry/lower_case

    PCB, 3MF, and STEP files for the lower case capacative keyboard

    37 parts10CC0-1.0
  • 2 layers79 × 106 mmSave a Term, the printed circuit board in 3D

    Save a Term

    inmbolmie/Save-a-Term

    Hardware for a PS/2 to 5251 and 3278 reverse keyboard adapter based on a TMK controller fork

    28 parts10GPL-3.0
  • 2 layers59 × 76.5 mmCompetitionProStarMini, the printed circuit board in 3D

    CompetitionProStarMini

    InsaneDruid/CompetitionProStarMini

    A replacement PCB for the Competition pro mini and pro star mini Joysticks to easily replace failing microswitches.

    18 parts10
  • 2 layers155 × 114 mmIOExpansion, the printed circuit board in 3D

    IOExpansion

    ja1umi/MUTIF09Project

    Various design materials for building my 8-bit-microprocessor-based single board computer(s)

    198 parts10MIT
  • 4 layers86 × 62 mmPedals, the printed circuit board in 3D

    Pedals

    janc18/CAE32

    Simracing equipment, including hardware, software, and firmware design.

    127 parts10GPL-3.0
  • 2 layers100 × 25 mmTEENSY 4.0 AUDIO TOOLKIT, the printed circuit board in 3D

    TEENSY 4.0 AUDIO TOOLKIT

    JayShoe/TEENSY_4.0_AUDIO_TOOLKIT

    The Teensy 4.0 Audio Toolkit Shield is an open source project for learning about, designing, and rapid-prototyping custom Audio PCBs using the Teensy Audio Library.

    58 parts10