2 layers44.7 × 39.3 mm
U passive mlt
ijnekenamay/Passive_modules
This is a passive outboard device for modular synths and can be used a "bare"PCB.
5 parts10
2 layers92.4 × 91 mm
DiodeORLogic
ijnekenamay/Passive_modules10This is a passive outboard device for modular synths and can be used a "bare"PCB.
- Size
- 92.4 × 91 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 11
- Pads
- 95
- Tracks, vias
- 67, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Feb 2022
- Updated
- 15 Jun 2022
Overview
DiodeORLogic is an open-source printed circuit board by ijnekenamay, from the ijnekenamay/Passive_modules repository on GitHub. It is a 2-layer board of 92.4 × 91 mm with 23 parts on 11 nets, routed with 67 tracks and 0 vias.
Its parts include 9 diodes, 9 connectors and 2 resistors. It belongs with the audio and music boards of this library.
README
README.mdPassive_modules
This is a passive outboard device for modular synths and can be used a "bare"PCB. It can be produced by submitting the Gerber file for PCB to a production company in China.
-
- Some of the products are Eurorack-standard.
DiodeORLogic
- This is a simple circuit mainly for mixing GATE/TRIGGER.
- It is 8in and 1out.
- P&P file and BOM are included so that you can use SMT assembly with JLCPCB etc.
- I use a 3.5mm stereo jack called PJ311. Unnecessary pins for stereo are floated. If you need a large quantity, you can purchase it from Aliexpress under the part number PJ342.
- It has actually been manufactured and is working well.
Passive multiple
- It was not actually manufactured. There is no guarantee of operation at this time.
- I use a 3.5mm stereo jack called PJ311. Unnecessary pins for stereo are floated. If you need a large quantity, you can purchase it from Aliexpress under the part number PJ342.
2hp switched multiple
- This is actually inspired by the Switched Multiple in "Extralife".MUST BE WATCH
- This is data for Eurorack format panels only; when submitting to PCB Fab, it is recommended that they be manufactured in aluminum sheet.
- EASY!
micro passive multiple
- This is an alternative to stackable cables. It is a PCB with only 3 TIPs and GND connected.
- It was not actually manufactured. There is no guarantee of operation at this time.
- I use a 3.5mm stereo jack called PJ311. Unnecessary pins for stereo are floated. If you need a large quantity, you can purchase it from Aliexpress under the part number PJ342.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | INPUT1 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J1 |
| 1 | INPUT2 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J2 |
| 1 | INPUT3 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J3 |
| 1 | INPUT4 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J4 |
| 1 | INPUT5 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J5 |
| 1 | INPUT6 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J6 |
| 1 | INPUT7 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J7 |
| 1 | INPUT8 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J8 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D10 |
| 1 | LOGO | DiodeORLogic:silk | G*** |
| 1 | OUT | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J9 |
| 1 | TestPoint_Pad_1.0x1.0mm | TestPoint:TestPoint_Pad_1.0x1.0mm | REF1 |
The 22 most common of 23 parts.
More from ijnekenamay/Passive_modules
1Similar boards
- 2 layers65 × 56 mm
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the DiodeORLogic PCB?
It measures 92.4 × 91 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DiodeORLogic use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DiodeORLogic KiCad files?
From the ijnekenamay/Passive_modules repository on GitHub, at the commit this page was made from: the board is DiodeORLogic/DiodeORLogic.kicad_pcb and its schematic u_passive_mlt/u_passive_mlt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DiodeORLogic design in my own project?
Its repository states no licence, so its author keeps all rights: ask ijnekenamay before reusing the design.