4 layers58.4 × 22.9 mm
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
101 parts66CC-BY-SA-4.0
Boards using the MBR0520LT1G
43 boardsBoards in 34 GitHub repositories, designed in KiCad, that use the MBR0520LT1G by Unknown maker. See how each wires it, with its parts, size, README and files; the MBR0520LT1G’s symbol, footprint and pinout are on its own page.
- 2 layers101.9 × 83.8 mm
PCB onigiricon
itaiko-project/ITAIKO-hardware
An open source Taiko no Tatsujin drum, originally based on Kasashiki's HIDtaiko and ravinrabbid's DonCon2040.
43 parts25 - 2 layers50.8 × 20.3 mm
- 2 layers169.9 × 190.9 mm
- 4 layers50.8 × 22.9 mm
RPGA Feather
Oak-Development-Technologies/RPGA-Feather
Home of everything RPGA! From schematics and board files to buildable examples!
82 parts20MIT - 2 layers44.9 × 47.2 mm
- 4 layers175 × 68.5 mm
- 2 layers100 × 87 mm
Bertha main
Hackuarium/bioreactor
Please refer to the documentation for all useful information.
159 parts7 - 4 layers58.4 × 22.9 mm
Quickfeather board
antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.
101 parts6CC-BY-SA-4.0 - 4 layers50 × 35.5 mm
- 2 layers56.2 × 30.2 mm
Regulated SEPIC converter
tony-corsten/regulated-SEPIC-converter
A regulated SEPIC converter based on the dual-rail switching supply, the ADP5071, with optional high PSRR low-noise LDOs (LT3094 and LT3042) on the output.
42 parts6 - 2 layers162 × 90 mm
- 2 layers40 × 40 mm
FancyLight V2
Glebka/FancyLight
FancyLight - an LED lamp powered by a Li-Ion battery, which can be found in used electronic cigarettes. It charges via a micro USB connector and is turned on and off using a touch button.
52 parts1 - 2 layers99.6 × 99.9 mm
Magloop pico
Greg-R/magloop_pico_pcb
Design and fabrication files the Magnetic Loop Antenna Controller printed circuit board.
102 parts1GPL-3.0 - 2 layers99.6 × 99.9 mm
Magloop pico
Greg-R/magloop_pico_pcb_2
Design and fabrication files the Magnetic Loop Antenna Controller printed circuit board.
101 parts1GPL-3.0 - 2 layers100 × 87 mm
- 4 layers234.1 × 105.6 mm
Gameconsole
Nikhil-Krishnamurthy/Retro-Gaming-Handheld
This project was creating a gaming handheld from scratch, including cadding the case and designing the pcb. This handheld will run retro games up to the SNES.
118 parts1 - 4 layers100 × 66.1 mm
- 2 layers30 × 97 mm
Helix vape
stevensun369/helix-vape-pcb
KiCad design for an ESP32-C6 buck-boost vape mod power board — LM5175 stage, 1.0–10 V @ 80 W, with full JLCPCB production files.
83 parts1 - 2 layers18.5 × 5 mm
BatterySwitcher
Supermanuu/BatterySwitcher
Bettery switching PCB for wireless Pro-micro based Sofle keyboards
5 parts1MIT - 2 layers80.1 × 80 mm
Fan controller revA
Benksterinho/Fan-Controller-PCB-ESP32-S3
Generated schematic files were removed. This folder now serves as the capture guide and naming reference.
61 parts - 2 layers43 × 25 mm
Electricity sound notifier
Glebka/electric-sound-notifier
Device designed to be connected to an AC-DC USB charger adapter. Upon plugging in, it emits three beeps to signal the presence of mains voltage. When the mains voltage is no longer detected it produces a prolonged beep.
21 parts - 2 layers127.2 × 117 mm
- 4 layers40 × 44 mm
Bmi-270-board v3
lewipewi/bmi-270-board-v3
Wearable 6-axis motion node for an IMU gesture controller. Each node samples a Bosch BMI270 at 200 Hz and streams it over ESP-NOW to a USB receiver on a PC, where a classifier turns boxing motions into gamepad inputs…
58 parts