2 layers100 × 87 mm
2 layers50.8 × 20.3 mm
ADCXX8S
xesscorp/StickIt21StickIt! board and modules that support the XuLA FPGA board.
- Size
- 50.8 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 29
- Pads
- 124
- Tracks, vias
- 242, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jan 2012
- Updated
- 2 Dec 2015
Overview
ADCXX8S is an open-source printed circuit board by xesscorp, from the xesscorp/StickIt repository on GitHub. It is a 2-layer board of 50.8 × 20.3 mm with 27 parts on 29 nets, routed with 242 tracks and 16 vias.
It is built around the LM2660M and MBR0520LT1G. Its parts include 14 capacitors, 4 resistors, 3 ICs, 1 diode and 1 connector. It belongs with the fPGA and programmable logic boards of this library.
Main components
2README
README.mdStickIt! Board and Modules
The StickIt! main motherboard and attached modules are used with the XuLA & XuLA2 FPGA boards to provide additional functions. The documentation, FPGA projects, firmware, schematic and PCB files are included in the subdirectories.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1nF | OctalAdc:rcl-C0603 | C5, C6, C8, C9, C11, C12, C13, C14 |
| 4 | 4.7uF | OctalAdc:rcl-C0603 | C1, C2, C3, C7 |
| 2 | 0.1uF | OctalAdc:rcl-C0603 | C4, C10 |
| 2 | VAL** | xess:HOLE | H1, H2 |
| 1 | modules:oshw-logo2 | ||
| 1 | 1 | OctalAdc:rcl-R0603 | R4 |
| 1 | 100 | OctalAdc:rcl-R0603 | R1 |
| 1 | 22 | OctalAdc:xess-742C163 | R3 |
| 1 | 51 | OctalAdc:rcl-R0603 | R2 |
| 1 | ADC108S | SMD IC Pckgs:TSSOP16 | U2 |
| 1 | CONN_8X2 | OctalAdc:pinhead-2X08 | J1 |
| 1 | LM2660 | SMD IC Pckgs:SSOP8 | U3 |
| 1 | LP2980 | SMD IC Pckgs:SOT23-5 | U1 |
| 1 | MBR0520LT1G | OctalAdc:SOD-123 | D1 |
| 1 | StickIt_Module_Connector | OctalAdc:xess-STICKIT-HEADER1 | STK1 |
Questions
How big is the ADCXX8S PCB?
It measures 50.8 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ADCXX8S use?
27 parts, built around the LM2660M and MBR0520LT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADCXX8S KiCad files?
From the xesscorp/StickIt repository on GitHub, at the commit this page was made from: the board is modules/OctalAdc/pcb/ADCXX8S.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADCXX8S design in my own project?
Its repository states no licence, so its author keeps all rights: ask xesscorp before reusing the design.
Similar boards
- 2 layers39.2 × 22.9 mm
Microwave Reciever
Multiscale-Metamaterial-Research-Lab/Optics-Table
Documentation for the 'Optics Table' and its development projects
15 partsMIT - 2 layers46 × 22 mm
Power Board
timohueser/MyoSense
As mentioned before the MyoSense Sensor Modules use dry stainless steel electrodes to pick up the small voltages generated by muscle activity on the skin above the monitored muscle.
26 partsGPL-3.0 - 4 layers58.4 × 22.9 mm
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
101 parts66CC-BY-SA-4.0 - 2 layers101.9 × 83.8 mm
PCB onigiricon
itaiko-project/ITAIKO-hardware
An open source Taiko no Tatsujin drum, originally based on Kasashiki's HIDtaiko and ravinrabbid's DonCon2040.
43 parts25 - 2 layers169.9 × 190.9 mm
- 4 layers50.8 × 22.9 mm
RPGA Feather
Oak-Development-Technologies/RPGA-Feather
Home of everything RPGA! From schematics and board files to buildable examples!
82 parts20MIT - 2 layers44.9 × 47.2 mm
